Transducer Accessories

Transducer Support Arm  The transducer support arm fits over the Vexilar rod holder. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth... More Details

Transducer Extension Cable - 10' Can't quite reach? Extension cables let you add on to the standard transducer cable length. Signal strength safe for up to 60 feet. Features: 10 and 20 Foot Lengths Co... More Details

Gimbal Bracket for FL Series Allows for mounting of all Vexilar flasher heads to any flat surface or to be secured to the Vexilar Pro Mount system.  The gimbal bracket allows for up-down movement flas... More Details

Digital C Cable Adapts Adapts Old SI-TEX Transducers To Newer Models Adapts older SI-TEX transducers to current ones. Features: Digital A Cable 8-pin Fuji (old type metal plug) to 8-pin CONXALL (plast... More Details

Adapts older SI-TEX transducers to current ones Digital A Cable 8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug). Product Specifications Dimensions4" L × 2" W × 1" HShipping... More Details

30' Extension Cable - 8-Pin SI-TEX Extension Cable Features: 30' 8-Pin Product Specifications Dimensions7" L × 7" W × 2" HShipping Weight0.7 lb More Details

15' Extension Cable - 8-Pin SI-TEX Extension Cable Features: 15' 8-Pin Product Specifications Dimensions8" L × 8" W × 1" HShipping Weight0.5 lb More Details

RealVision 3D Transducer Extension Cable - 8M (26') RealVision 3D Transducer Extension Cables work with the transom-mounted RV-100 and through-hull RV-200 and RV-300 series transducers.  Each extensio... More Details

RealVision 3D Transducer Extension Cable - 3M (10') RealVision 3D Transducer Extension Cables work with both the transom-mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  ... More Details

RealVision 3D Transducer Extension Cable - 5M(16') RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  E... More Details

Y Cable for 2 CHIRP Transducers for CP470 & CP570 Raymarine Y Cable is specifically designed for two CHIRP transducers for Raymarine's CP470 and CP570. Product Specifications Dimensions10" L × 8" W × ... More Details

T122 Micronet Wireless NMEA Interface Key Features Only 135g (0.3lbs) 9 - 24 V external power supply NMEA 0183 Ver 2.3 2 inputs and 1 output External Alarm connector Product Description This interface... More Details

Trolling Motor Mount for HV-100 Raymarine's Trolling Motor Mount bracket for the HV-100 transducer.  Product Specifications Dimensions9" L × 8" W × 4" HShipping Weight0.6 lbCountry of OriginCHINA More Details

Trolling Motor Bracket Trolling Motor Bracket specifically designed for the Dragonfly CPT-DV and CPT-DVS transom mount transducers. Product Specifications Dimensions8" L × 6" W × 1" HShipping Weight0.... More Details

Transom Mount Bracket for HV-100 Raymarine Transom Mount Bracket specifically for Raymairne's HV-100. Product Specifications Dimensions9" L × 8" W × 4" HShipping Weight0.6 lbCountry of OriginCHINAHarm... More Details

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 3M Features: Speed, Depth and Temperature 3M Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers Product Specificati... More Details

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10M Features: Speed, Depth and Temperature 10M Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers Product Specifica... More Details

Transducer Extension Cable, 5 meter Adds 5 meters of length to the stock transducer cable. Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems. Product Specifications Dimensions8... More Details

DSM30 & DSM300 Transducer Adapter Cable The DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine's wide offering of specialty and high performance in-hull, through-hull or transom mou... More Details

Step Mount for RV-100 RealVision 3D Transom Mount Transducer The Raymarine RV-100 step mount allows you to mount a RV-100 transom mount transducer to the step of your boat. Product Specifications Dime... More Details

RV-100 RealVision 3D Transom Bracket Kit This transom mount transducer service kit includes all of the spare parts and accessories originally included with the RV-100 transducer. The bracket kit inclu... More Details

Locking Collar Kit for RealVision 25-Pin Raymarine Spare RealVision 25-pin locking collar kit Product Specifications Dimensions9" L × 6" W × 1" HShipping Weight0.1 lb More Details

iTC-5 Instrument Transducer Converter The iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Pl... More Details

HV Hypervision Extension Cable - 4M Matching extension cable for the HV-100 and HV-300 hypervision transducers from Raymarine.  Specifications: Length 4M Product Specifications Dimensions9" L × 9" W ×... More Details

E66023 Fairing Block f/ B744V This E66023 is a fairing block designed for use with the Raymarine B744V tranducer. Product Specifications Dimensions15" L × 4" W × 4" HShipping Weight1.9 lbCountry of Or... More Details

CPT-S Transom Bracket & Hardware Raymarine CPT-S Transom Bracket with Hardware. Specifically for Raymarine's CPT-S. Product Specifications Dimensions8" L × 4" W × 3" HShipping Weight0.25 lb More Details

CPT-DV/CPT-DVS Mounting Kit Transom Mount Bracket for CPT-DV & CPT-DVS Product Specifications Dimensions8" L × 6" W × 2" HShipping Weight0.2 lbCountry of OriginHUNGARYHarmonized Code9014.90.40.00 More Details

CP470/CP570 Transducer Extension Cable - 5M Raymarine's 5M transducer extension cable specifically for CP470 and CP570. Product Specifications Dimensions12" L × 9" W × 2" HShipping Weight1.15 lb More Details

Axiom RV to 25 RV & 7-pin CP370 Transducers Y-Cable 0.5M 25-Pin to 25-Pin and 7-Pin Y-Cable attach RealVision and CP370 transducer to Axiom RV. Product Specifications Dimensions12" L × 8" W × 1" HShip... More Details

Axiom RV Adapter Cable (25-pin to 7-pin) Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV Product Specifications Dimensions12"... More Details

Axiom 7DV Adaptor Cable (9-pin to 7-pin) For attaching a CP370 Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV Product Specif... More Details

Adapter Cable for Dragonfly Green 10-Pin Transducer to Element HV 15-Pin Transducer Features: Engineered to high standards High-grade design delivers extended lifespan Made with premium materials Prod... More Details

Adapter Cable for CPTS/DVS 9-Pin Transducer to Element 15-Pin Unit Raymarine Adapter Cable used to connect a CPT-S or 9-pin DownVision transducers to Element HV display. Product Specifications Dimensi... More Details

Adapter Cable for CPT-S Transducers To Axiom Pro S Series Units Adapter Cable (25 pin to 9 pin) attach DownVision (CPT-1xx) transducer to Axiom RV. Features: Type: 25 pin to 9 pin Applications: DownVi... More Details

Adapter Cable for Axiom Pro with CP370 Transducer Used to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Air... More Details

Adapter Cable 25-Pin to 25-Pin & 7-Pin - Y-Cable to RealVision & Embedded 600W Airmar TD to Axiom RV The Raymarine transducer adapter cable allows you to join your Raymarine RealVision 3D transducer a... More Details

Adapter Cable - 25-Pin to 9-Pin & 8-Pin - Y-Cable to DownVision & CP370 Transducer to Axiom RV Y-Cable (25 pin to 9 & 8 pin) to attach a DownVision (CPT-1xx) Transducer & an Airmar (CP370 style connec... More Details

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RV The Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts ... More Details

A80328 Adapter Cable Product Compatibility: Single B75/B175 Operation Cable Product Specifications Dimensions12" L × 9" W × 2" HShipping Weight0.4 lb More Details

9-Pin to 7-Pin Adapter for 600W Airmar to Axiom DV Raymarine's Axiom DV to 7-pin Embedded Transducer Adapter 0.3M. Product Specifications Dimensions12" L × 9" W × 1" HShipping Weight0.25 lb More Details

4M Transducer Extension Cable f/CHIRP & DownVision™ Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100. Product Specifications Dimensions12" L × 8" W × 2" HShipping W... More Details

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-Fish Use Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. Product ... More Details

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns an... More Details

9-Pin Black to 7-Pin Blue Adapter Cable for Non-CHIRP Transducers Connects a non-CHIRP transducer with a 9-pin black connector to the older 7-pin blue sockets on displays and echosounder modules.  For... More Details

With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose... More Details

The DST100's bronze housing includies a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling g... More Details

Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause ... More Details

MHX-ICE Ice Flasher Transducer Mounting Hardware  The MHX ICE is a kit that provides the float and stopper for XI 9 19 and XI 9 20 ICE transducers. WARNING: This product can expose you to chemicals in... More Details

MHX-HW MEGA Imaging Metal Transom Mount Bracket  MEGA Imaging+ Metal Mounting Bracket allows adjustment of transducer angle. Durable, rugged metal construction ideal for transom-mount installations.  ... More Details

MHX-HS Transom Transducer Hardware 740011-1 Features: Durable Construction for Lasting Use Impact Release Mounting Bracket Lets you repair or replace your existing trolling motor transom mounting brac... More Details

MHX XNPT Portable Hardware Kit Mounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of Californi... More Details

MHX MXNT Transom Mount Hardware f/MEGA Transducer Stainless Steel mounting hardware for the XNT transom mount transducers. WARNING: This product can expose you to chemicals including LEAD which is kno... More Details

MEGA Live 2 Transom Mount Bracket The MEGA Live 2 Transom Mount expands the versatility of MEGA Live 2, allowing anglers to install the transducer on the back of the boat, like traditional 2D, Down Im... More Details

EC M30 Transducer Extension Cable - 30' 30' extension cable for transducers.  Current Models:  ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12 Discontinued Series: 5... More Details

EC M10 Transducer Extension Cable - 10' 10' extension cable for transducers.  Current Models:  ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7, HELIX 9, HELIX 10, HELIX 12 Discontinued Series: 5... More Details

AD-MTM-HW-MSI MEGA SI+ Trolling Motor Adapter Bracket  MEGA SI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged c... More Details

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket  MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged c... More Details

AD XTM 9 Transducer Mounting Hardware This hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor. For use with: XNT 9 20 T XNT 9 QB 90 T XNT 9 S... More Details

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging trans... More Details

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter Cable Y Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch.  For use with Side... More Details

FishTrax™ Transducer Mount The FishTrax transducer mount provides a universal transducer mounting option for sup's, paddleboards, kayaks canoes and small boats.   This solution enables the quick and e... More Details

FishTrax™ Suction Cup Transducer Mounting Bracket The FishTrax™ Suction Cup Transducer Mount easily attaches the standard FishTrax™ transducer to any hull for optimal performance.  Click and go for ea... More Details

FishTrax™ Sidescan Transducer Adapter Scan for fish suspended in the water with our FishTrax™ Transducer SideScan™ Adapter.  It can attach to a standard ACME threaded broomstick or paint roller handle... More Details

FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surfac... More Details

Trolling Motor Shaft Mount for Panoptix™ LVS32 Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including thos... More Details

Trolling Motor Mount f/GT36 and GT56  Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protect... More Details

Trolling Motor Mount - 4/8-Pin Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection fro... More Details

Trolling Motor Mount Easily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions... More Details

Trolling Motor Barrel Mount for Panoptix™ LVS32 Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits ... More Details

Trolling Motor Barrel Mount for LVS62 Transducer Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fi... More Details

Trolling Motor Barrel Mount f/Livescope Plus LVS34  Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and... More Details

Trolling Motor Adapter Kit Mount your Airmar TM150M transducer with CHIRP technology to your trolling motor with this adapter kit. Contents include two 3/4" pan head screws, a plastic trolling motor a... More Details

Transom Mount for Panoptix™ LVS32 Easily attach your compatbile Panoptix transducer to the transom of your boat with this stainless steel mount. WARNING: This product can expose you to chemicals which... More Details

Transom Mount Bracket f/Livescope Plus LVS34 Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount. Product Specifications Dimensions7" L × 7"... More Details

Transom Mount Bracket Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Product Specifications ... More Details

Transducer Spray Shield Garmin's transducer spray shield is available for Garmin side scanning transducers. Mounting hardware included. WARNING: This product can expose you to chemicals which are know... More Details

Female 4-pin to Male 6-pin Transducer Adapter for echo™ Series This transducer adapter allows you to use your existing 6-pin transducer with your echo™ series fishfinder.WARNING: This product can expo... More Details

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP™ CHIRP Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount tradition... More Details

Suction Cup Transducer Adapter Using your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat. WARNING: This product can expose... More Details

Step Mount Easily attach your compatible 4-, 8- or 12-pin transducer to the step of your boat with this mount, which provides excellent sonar returns at low speeds. The mount protects the transducer f... More Details

Replacement Transom Mount Transducer Bracket This replacement bracket kit has everything you need to mount your transducer on the transom of your boat. WARNING: This product can expose you to chemical... More Details

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & Temp This replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequenc... More Details

Replacement Fairing Block for GT56 Thru-Hull Transducers Use our fairing block to position your GT56 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. I... More Details

Replacement Fairing Block f/GT21, GT23, GT41, GT50 & GT51 Series of Thru-Hull Scanning Transducers Use our fairing block to position your Garmin GT21, GT23, GT41, GT50 or GT51 series of thru-hull scan... More Details

Perspective Mount for LVS62 Transducer The perspective mode mount takes your LiveScope™ XR real-time scanning sonar to the next level. Attach your LVS62 transducer to this mount to add an overhead son... More Details

Perspective Mount f/Livescope Plus LVS34 The Perspective Mode Mount takes your LiveScope™ Plus real-time scanning sonar to the next level. Attach your LVS34 transducer to this mount to add an overhead... More Details

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft Mount Mount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, includ... More Details

Panoptix™ LiveScope™ LVS12 Trolling Motor Barrel Mount Mount a compatible Panoptix™ transducer on the barrel of your trolling motor with this kit. It features molded teeth for ultimate adjustability a... More Details

Panoptix™ LiveScope™ LVS12 Transom Mount Bracket Mount a compatible Panoptix™ transducer on the transom of your boat with this kit. WARNING: This product can expose you to chemicals which are known to... More Details

Panoptix LiveScope™ Transducer Extension Cable - 10' - 21-Pin Extend the cable length of your compatible Panoptix™ transducer with this 10 ft (3 m) cable. Compatible Devices: Panoptix LiveScope™ Syste... More Details

Paddle Wheel Replace your paddle wheel without having to replace the entire transducer. This kit includes the paddle wheel and the paddle wheel shaft. Product Specifications Dimensions6" L × 3" W × 1"... More Details

LVS32 Thru-Hull Stem Extender Add 6” to the existing stem length, of your compatible Panoptix LiveScope™ transducer, for easier thru-hull installations in thick-hulled boats. Multiple stem extenders c... More Details

LVS32 Thru-Hull Fairing Block for Panoptix LiveScope™ System Use Garmin's fairing block to position your Panoptix LiveScope LVS32-TH thru-hull down transducer parallel to the water line for increased ... More Details

LiveScope™ XR Zero Degree Pole Mount for LVS62 Transducer Position your LiveScope™ XR LVS62 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing; works for open water ... More Details

Large Nose Cone - GT56 Transducer Compatible Replace the standard part of your compatible trolling motors or use the nose cone to install a compatible Garmin GT56 model transducer. If you’re rerouting... More Details

Jack Plate Mount Easily attach your compatible 4-, 8- or 12-pin scanning transducer to the jack plate of your boat with this mount, which provides excellent sonar returns at low speeds. The mount prot... More Details

Heavy-Duty Transom Mount Bracket w/Spray Shield Mount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to... More Details

Heavy Duty Transducer Extension Cable - 30' - 8-Pin Extend the length of a compatible 8-pin transducer with this 30-foot cable. Product Specifications Dimensions10" L × 10" W × 3" HShipping Weight1.6 ... More Details

Heavy Duty Transducer Extension Cable - 10' - 8-Pin Extend the length of a compatible 8-pin transducer with this 10-foot cable. Product Specifications Dimensions10" L × 9" W × 1" HShipping Weight0.7 l... More Details

GT17M-THF Replacement Jam Nut Use this stainless steel transducer jam nut on a compatible GT17M-THF transducer. More Details

GT17M-THF Galvanic Isolator Kit Use this to replace the galvanic isolation parts included with the GT17M-THF transducer. More Details

GT Transducer Thru-Hull Mounting Hardware Install your Garmin thru-hull scanning transducer easily with this mounting hardware. Includes an isolation plate, bushings, anti-rotation bolts, washers and ... More Details

GSD™ 26 Terminal Lid Terminal Lid for Garmin's GSD™ 26WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproduc... More Details

Extension Cable with XID - 12-Pin - 30' Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product... More Details

Extension Cable with XID - 12-Pin - 10' Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This produc... More Details

Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Compatible Devices: GPSMAP® 7607x... More Details

Adapter Cable To Connect GT30 T/M to P729/P79 Connect a Garmin GT30 transom mount scanning transducer and an Airmar P72 or P79 in-hull mount traditional transducer to a compatible echoMAP™ chartplotte... More Details

8-Pin Transducer to 4-Pin Sounder Adapter Cable Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable. Compatible Devices: STRIKER™ 4 STRIKER™ 4 Porta... More Details

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. WARNING: This product can ex... More Details

8-Pin Transducer Extension Cable - 30' Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable. WARNING: This product can expose you to chemicals which are known to the St... More Details

8-Pin Trnasducer Extension Cable- 10' Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable. WARNING: This product can expose you to chemicals which are known to the Sta... More Details

8-Pin Female to Wire Block Adapter Garmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection. WARNING: This product can expose you... More Details

8 Degree Pole Mount f/Livescope Plus LVS34 Position your LiveScope™ Plus LVS34 transducer on this 8-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).... More Details

6-Pin Female to 8-Pin Male Adapter This adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.WARNING: This product can expose you to chemicals which are know... More Details

4-Pin Transducer to 8-Pin Sonar Port Connect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable. WARNING: This product can expose you to chemicals which... More Details

4-Pin Transducer to 12-Pin Sounder Adapter Cable Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable. WARNING: This product can expose you to che... More Details

Transducer Extension Cable Use this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit. Compatible Devices: echo™ 100 echo™ 150 echo™ 200 echo™ 300c echo™ 500c echo™ 550c WAR... More Details

Garmin 12-Pin Transducer Y-Cable Port/Starboard - 10m Connect a port/starboard pair of thru hull or transom mount transducers to the sonar unit with this 12-pin Y-cable. This cable allows the use of t... More Details

12-Pin To Dual 4-Pin Transducer Y-Cable Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals whic... More Details

0 Degree Pole Mount f/Livescope Plus LVS34 Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too).... More Details

0 Degree Livescope Pole Mount Position your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). Product ... More Details

TZtouch3 Transducer Y-Cable 12-Pin to 2 Each 10-Pin Furuno's TZtouch3 transducer Y-cable connects a 12-pin to 2 different 10-pin. This product may not be returned to the original point of purchase. Pl... More Details

MB1100 The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already su... More Details

FCV800 Y-Cable f/Multi-Channel CHIRP Transducer  Specifications: 12-Pin to 2 10-Pin Specifically for FCV800 For dual channel CHIRP transducer Y-cable This product may not be returned to the original p... More Details

The AIR-033-476 is a high performance fairing block for transducers utilizing the Airmar B-744V housing. WARNING: This product can expose you to chemicals which are known to the State of California to... More Details

The AIR-033-391 is a high-performance fairing block for transducers utilizing the Airmar B-260 housing. WARNING: This product can expose you to chemicals which are known to the State of California to ... More Details

AIR-033-351 The AIR-033-351 is a standard fairing block for transducers utilizing the Airmar B-45 housing. WARNING: This product can expose you to chemicals which are known to the State of California ... More Details

Transducer Pigtail, 10-Pin(F), 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more ... More Details

Transducer Y-Cable, 10-Pin (F) to 10-Pin (M) and 6-Pin (M)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproduct... More Details

The AIR-033-226 is a standard fairing block for transducers utilizing the Airmar B-256 housing. WARNING: This product can expose you to chemicals which are known to the State of California to cause ca... More Details

Adapter Cable, 8-Pin Transducer to 10-Pin SounderWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.... More Details

Transducer Extension Cable, 10-Pin(M) to 10-Pin(f), 4 metersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reprodu... More Details

Adapter Cable, 10-Pin Transducer to 8-Pin SounderWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.... More Details

50 Meter Cable Kit w/ Junction Box, FI5001 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For m... More Details

12-Pin XDR Extension Cable - 10M Features: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please contact... More Details

12-Pin Pigtail Cable for TZT3 Furuno's 12-Pin Pigtail Cable specifically for TZT3. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any... More Details

10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3 Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Plea... More Details

Forward-Facing Motorized Sonar Mount The FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mo... More Details

Hydrodynamic Fairing Block for CB131 Series Transducers Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the insta... More Details

Hydrodynamic Fairing Block for CB101 Series Transducers Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the insta... More Details

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Navico units. Product Specifications Dimensions10" L × 6" W × 1" HShipping... More Details

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with SI-TEX NavPro units. Product Specifications Dimensions10" L × 6" W × 1"... More Details

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Garmin units. Product Specifications Dimensions10" L × 6" W × 1" HShippi... More Details

Transducer Mounting Plate Features: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included Product Specific... More Details