Select Category
_0x200.jpg)
Seastar Power Purge Service Kit - Hp6125 - 1-Hp6125F1
Power Purge Service Kit
Seastar Pro Front Pivot Mount Outboard 8" Stroke 8.34 Cubic Inch Cylinder - Hs5157 Seal Kit - Hc6345-3 - 1-Hc63453F1
The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. Systems require the use of a SeaStar Pro helm and reinforced Kevlar hoses only(1500 psi).All cylinders ending in "3" have been updated and fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB).
Seastar Pro® Hk7500A3 Hydraulic Steering Kit Without Hose - Hk7500-4 - 1-Hk75004F1
Seastar Pro Hydraulic Steering Kit without Hoses. For high performance applications up to 350HP including bass boats and other performance boats capable of speeds in excess of 65 MPH. Suitable for use with high-performance propellers and jack plates. Low friction hydraulic steering systemStandard 3/4" tapered steering shaft4.25 turns lock-to-lockCompact helm with a 4-7/16" footprint, needs only 3" dash holePackaged with: HH57703 SeaStar PRO 2.0 Front Mount Helm, HC63453 Front Mount Cylinder,HA5430 (2) - SeaStar Oil (Quart), Instructions
Seastar Quick Connect Hose Ends - Hp6170 - 1-Hp6170F1
Quick Connect Hose Ends
Seastar Smartstick Raymarine Rudder Reference Unit - Ar4502Rm - 1-Ar4502Rmf1
SmartStick is a non-contact autopilot position sensor that mounts to outboard front mount cylinders. For Raymarine autopilots.
Seastar Solutions 022328 Clutch Detent Kit - 22328 - 1-022328F1
Clutch Detent Kit
Seastar Solutions 039489002 In Series Dual Station Kit - 30 Series - 039489-002 - 1-039489002F1
In Series dual station kit - 30 series(2 required for twin control)
Seastar Solutions 047307 Neutral Safety Switch Kit For S Controls - 47307 - 1-047307F1
Neutral Safety Switch Kit for S Controls
Seastar Solutions 051801033 Sl3 Control Neutral Safety Switch - 051801-033 - 1-051801033F1
Neutral Safety Switch for SL-3 Side Mount Controls.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23011 - 1-Cc23011 Superseded By: 1-Ccx63311F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23012 - 1-Cc23012 Superseded By: 1-Ccx63312F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Series Control Cable Assembly - Cc23013 - 1-Cc23013 Superseded By: 1-Ccx63313F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63306 - 1-Ccx63306F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63307 - 1-Ccx63307F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63308 - 1-Ccx63308F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63309 - 1-Ccx63309F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63310 - 1-Ccx63310F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63311 - 1-Ccx63311F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63312 - 1-Ccx63312F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63313 - 1-Ccx63313F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63314 - 1-Ccx63314F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63315 - 1-Ccx63315F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63316 - 1-Ccx63316F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63317 - 1-Ccx63317F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63318 - 1-Ccx63318F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63319 - 1-Ccx63319F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63320 - 1-Ccx63320F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63321 - 1-Ccx63321F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63322 - 1-Ccx63322F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63323 - 1-Ccx63323F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63324 - 1-Ccx63324F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63325 - 1-Ccx63325F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63326 - 1-Ccx63326F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63327 - 1-Ccx63327F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63328 - 1-Ccx63328F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63329 - 1-Ccx63329F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63330 - 1-Ccx63330F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63332 - 1-Ccx63332F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63334 - 1-Ccx63334F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63336 - 1-Ccx63336F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63338 - 1-Ccx63338F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63340 - 1-Ccx63340F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63342 - 1-Ccx63342F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63350 - 1-Ccx63350F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.
Seastar Solutions 33C Sst Red Jacket Control Cable - Cc33219 - 1-Cc33219 Superseded By: 1-Ccx63319F1
Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. Uses a heavier jacket than the standard cables and a stainless steel Lubri-Core core wire for smooth operation and longer life (8" min. bend radius).
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34305 - 1-Cc34305F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34310 - 1-Cc34310F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34315 - 1-Cc34315F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34320 - 1-Cc34320F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34325 - 1-Cc34325F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lu Control Cablew/Knob/T-Handle - Cc34330 - 1-Cc34330F1
Flexible push-pull cable for remote control of choke, throttle, shut off, fuel valves, vents and many other applications. Solid stainless steel core wire w/HDPE liner and outer casing for durability and resistance to UV and chemicals. Includes both knob and T-handle.
Seastar Solutions 33Lv No Hub Control Cable - Cc34510 - 1-Cc34510F1
Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals.
Seastar Solutions 33Lv No Hub Control Cable - Cc34515 - 1-Cc34515F1
Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals.
Seastar Solutions 33Lv No Hub Control Cable - Cc34520 - 1-Cc34520F1
Great for throttles or other applications where precise control is desired. Push the button for quick settings, then turn the knob for micro adjustments. Positive, adjustable brake maintains settings regardless of vibration or back pressure. Uses standard Teleflex throttle connection kits. HDPE outer casing for durability and best resistance to UV and chemicals.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63013 - 1-Ccx63013F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63014 - 1-Ccx63014F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63015 - 1-Ccx63015F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63017 - 1-Ccx63017F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63018 - 1-Ccx63018F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63020 - 1-Ccx63020F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63021 - 1-Ccx63021F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63022 - 1-Ccx63022F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 3600 Merc Tfxtreme Control Cable Assembly - Ccx63024 - 1-Ccx63024F1
Fits Mercury Sport Jets. Cable has a 10-32 threaded terminal at control end and Mercury type engine end. The splined, coated core minimizes lost motion and offers maximum smoothness for complex and/or long runs.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17007 - 1-Cc17007F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17008 - 1-Cc17008F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17009 - 1-Cc17009F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17010 - 1-Cc17010F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17011 - 1-Cc17011F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17012 - 1-Cc17012F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17013 - 1-Cc17013F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17014 - 1-Cc17014F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17015 - 1-Cc17015F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17016 - 1-Cc17016F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17017 - 1-Cc17017F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 400 Series Omc-J/E Control Cable Assembly - Cc17018 - 1-Cc17018F1
Stainless steel and brass fittings with stainless steel core. Fits pre-1979 OMC/Johnson/Evinrude w/BRP/OMC controls.
Seastar Solutions 600A Series Mercury/Mercruiser/Mariner/Force Control Cable Assembly - Cc17916 - 1-Cc17916 Superseded By: 1-Ccx17916F1
Stainless steel and brass fittings. Fits Mariner/Mercury/Mercruiser 1965-date; Force 1993-date w/Mercury controls; all Mariner engines with Mercury/Mariner controls (except pre-1993 40hp & lower); all 1993-date Force (US Marine) w/Force/US Marine/Mercury controls. 8" min. bend radius.
Seastar Solutions Ch5200 Series Single Function Control For Single S Top Mt. - Ch5210P - 1-Ch5210Pf1
Ideal for single or dual station inboard, I/O, and O/B applications. Single function control - each lever controls throttle OR shift. Utilize 3300/33C or 4300/43C type cables. Adjustable throttle friction and shift detent feel. Optional neutral safety switch and clutch detent kit available.
Seastar Solutions Ch5200 Series Single Function Control For Twin S Top Mt. - Ch5200P - 1-Ch5200Pf1
Ideal for single or dual station inboard, I/O, and O/B applications. Single function control - each lever controls throttle OR shift. Utilize 3300/33C or 4300/43C type cables. Adjustable throttle friction and shift detent feel. Optional neutral safety switch and clutch detent kit available.
Seastar Solutions Ft7000P Pro-Pedal Customizable Foot Throttle W/Slide Bracket - Ft7000P - 1-Ft7000Pf1
The first foot throttle that can be fully customized to fit both the boat and the driver. Designed with a robust torsion spring and locking fasteners to improve both reliability and durability, season after season and its compact design keeps the deck uncluttered and allows for more room around the pedal, and an integrated slide makes it easy to adjust the pedal position for different drivers. Easy to installEnclosed/contained mechanism to keep out debrisWill accept any OEM style or 30 series sized cableCan accept the throttle cable from the front, behind or aboveComfortable 12.5° forward angle for a more comfortable foot position when operating at slow speedsFull idle-to-WOT control
Seastar Solutions Hf4202 Cylinder Bleed Kit, 2/Kit - Hf4202 - 1-Hf4202F1
Fitting Kit
Seastar Solutions Hf4203 Cylinder Bleed Kit, 2/Kit - Hf4203 - 1-Hf4203F1
Fitting Kit
Seastar Solutions Jp5040R Standard Hydraulic Jackplate, 4" Setback - Jp5040R - 861-Jp5040Rf1
The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders. Our Standard Jackplate is easily capable of handling up to 300 horsepower enginesRapid hydraulic response in 8.5 secondsComplete engine support at full thrustEasily moves engine up or down at full thrustSmooth operation with composite bushingsEasy wrench access to engine bolts from the sideCompatible with Power Pole® and Talon®
Seastar Solutions Jp5040X Xtreme Hydraulic Jackplate, 4" Setback - Jp5040X - 861-Jp5040Xf1
The latest in the SeaStar Jackplate Revolution. Delivering advanced engineering through customer input. Easy wrench access to engine boltsEasier access to transom mounting boltsThicker anodizing with anode attachment pointsImproved smoother bushing designShallow water anchor mountable on all setbacksEasier SmartStick installation for ProTap upgradesLower weight
Seastar Solutions Jp5060R Standard Hydraulic Jackplate, 6" Setback - Jp5060R - 861-Jp5060Rf1
The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders. Our Standard Jackplate is easily capable of handling up to 300 horsepower enginesRapid hydraulic response in 8.5 secondsComplete engine support at full thrustEasily moves engine up or down at full thrustSmooth operation with composite bushingsEasy wrench access to engine bolts from the sideCompatible with Power Pole® and Talon®
Seastar Solutions Jp5060X Xtreme Hydraulic Jackplate, 6" Setback - Jp5060X - 861-Jp5060Xf1
The latest in the SeaStar Jackplate Revolution. Delivering advanced engineering through customer input. Easy wrench access to engine boltsEasier access to transom mounting boltsThicker anodizing with anode attachment pointsImproved smoother bushing designShallow water anchor mountable on all setbacksEasier SmartStick installation for ProTap upgradesLower weight
Seastar Solutions Jp5080R Standard Hydraulic Jackplate, 8" Setback - Jp5080R - 861-Jp5080Rf1
The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders. Our Standard Jackplate is easily capable of handling up to 300 horsepower enginesRapid hydraulic response in 8.5 secondsComplete engine support at full thrustEasily moves engine up or down at full thrustSmooth operation with composite bushingsEasy wrench access to engine bolts from the sideCompatible with Power Pole® and Talon®
Seastar Solutions Jp5080X Xtreme Hydraulic Jackplate, 8" Setback - Jp5080X - 861-Jp5080Xf1
The latest in the SeaStar Jackplate Revolution. Delivering advanced engineering through customer input. Easy wrench access to engine boltsEasier access to transom mounting boltsThicker anodizing with anode attachment pointsImproved smoother bushing designShallow water anchor mountable on all setbacksEasier SmartStick installation for ProTap upgradesLower weight
Seastar Solutions Jp5100R Standard Hydraulic Jackplate, 10" Setback - Jp5100R - 861-Jp5100Rf1
The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders. Our Standard Jackplate is easily capable of handling up to 300 horsepower enginesRapid hydraulic response in 8.5 secondsComplete engine support at full thrustEasily moves engine up or down at full thrustSmooth operation with composite bushingsEasy wrench access to engine bolts from the sideCompatible with Power Pole® and Talon®
Seastar Solutions Jp5100X Xtreme Hydraulic Jackplate, 10" Setback - Jp5100X - 861-Jp5100Xf1
The latest in the SeaStar Jackplate Revolution. Delivering advanced engineering through customer input. Easy wrench access to engine boltsEasier access to transom mounting boltsThicker anodizing with anode attachment pointsImproved smoother bushing designShallow water anchor mountable on all setbacksEasier SmartStick installation for ProTap upgradesLower weight
Seastar Solutions Jp5120R Standard Hydraulic Jackplate, 12" Setback - Jp5120R - 861-Jp5120Rf1
The SeaStar Standard Jackplate is one of the sleekest and most durable engine Jackplates available. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. The SeaStar Jackplate features sleek, bold styling that is redefining the look for Jackplates.Available in 4", 6", 8", 10" & 12" setbacks, it also has a new, high speed, hydraulic actuator that lifts engines 5.8" in 8.5 seconds. Rated for 300 horsepower engines. Tilt when used with SeaStar steering cylinders. Our Standard Jackplate is easily capable of handling up to 300 horsepower enginesRapid hydraulic response in 8.5 secondsComplete engine support at full thrustEasily moves engine up or down at full thrustSmooth operation with composite bushingsEasy wrench access to engine bolts from the sideCompatible with Power Pole® and Talon®
Seastar Solutions Mariner 630 Series Control Cable - Cc21010 - 1-Cc21010F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions Mariner 630 Series Control Cable - Cc21012 - 1-Cc21012F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions Mariner 630 Series Control Cable - Cc21013 - 1-Cc21013F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions Mariner 630 Series Control Cable - Cc21014 - 1-Cc21014F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions Mariner 630 Series Control Cable - Cc21015 - 1-Cc21015F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions Mariner 630 Series Control Cable - Cc21017 - 1-Cc21017F1
Mariner/Mercury/Mercruiser/Force/US MarineStainless steel and brass fittings. Fits Mariner (pre-1993 40hp & less w/Mercury/Mariner controls. 8" Min bend radius.
Seastar Solutions No Feedback Rack And Pinion Steering Kit, Dual - Ss15212 - 1-Ss15212F1
NFB Pro Rack systems are suitable for single-station, high performance boats equipped with a single non-power-assisted outboard (up to V-6) in which engine flutter or steering instability is present. New Back Mount design installs easily and replaces standard Teleflex/Seastar Solutions rack steering without dash modifications. 4 turns lock to lock. Precision rack & pinion steering. Note: SSC124XX old style rack cables CANNOT be used with these systems. Features:Patented No FeedBack™ steering mechanismDual cables minimize lost motionPrecise feel of 4 turns lock-to-lockMinimal clutch free playStandard 3/4" tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification programsIncludes:SH5230P - No FeedBack HelmSB39544P 90° - Bezel KitSSC135XX - RackDual Cable (1)
Seastar Solutions No Feedback Rack And Pinion Steering Kit, Dual - Ss15213 - 1-Ss15213F1
NFB Pro Rack systems are suitable for single-station, high performance boats equipped with a single non-power-assisted outboard (up to V-6) in which engine flutter or steering instability is present. New Back Mount design installs easily and replaces standard Teleflex/Seastar Solutions rack steering without dash modifications. 4 turns lock to lock. Precision rack & pinion steering. Note: SSC124XX old style rack cables CANNOT be used with these systems. Features:Patented No FeedBack™ steering mechanismDual cables minimize lost motionPrecise feel of 4 turns lock-to-lockMinimal clutch free playStandard 3/4" tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification programsIncludes:SH5230P - No FeedBack HelmSB39544P 90° - Bezel KitSSC135XX - RackDual Cable (1)
Seastar Solutions No Feedback Rack And Pinion Steering Kit, Dual - Ss15214 - 1-Ss15214F1
NFB Pro Rack systems are suitable for single-station, high performance boats equipped with a single non-power-assisted outboard (up to V-6) in which engine flutter or steering instability is present. New Back Mount design installs easily and replaces standard Teleflex/Seastar Solutions rack steering without dash modifications. 4 turns lock to lock. Precision rack & pinion steering. Note: SSC124XX old style rack cables CANNOT be used with these systems. Features:Patented No FeedBack™ steering mechanismDual cables minimize lost motionPrecise feel of 4 turns lock-to-lockMinimal clutch free playStandard 3/4" tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification programsIncludes:SH5230P - No FeedBack HelmSB39544P 90° - Bezel KitSSC135XX - RackDual Cable (1)
Seastar Solutions No Feedback Rack And Pinion Steering Kit, Single - Ss15112 - 1-Ss15112F1
Teleflex has applied its patented No FeedBack technology to the incredible precision of a rack and pinion system, and engineered-in serious advances in steering comfort and control. A drop-in replacement for Teleflex "The Rack". Applications: NFB Rack single-cable systems are suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. NFB Rack accepts wheels up to 16" diameter. New Back Mount design means easy installation; helm & cable are installed as a unit from behind dash and replace standard Teleflex/Seastar Solutions rack steering without dash modifications. Note: SSC124XX old style rack cables CANNOT be used with these systems. Features:Patented No FeedBack™ Steering mechanismPrecise feel of 4 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endsMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH5230P - No FeedBack HelmSB39544P 90° - Bezel KitSSC134XX - Steering Cable
