Select Category

360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low... More Details

360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low... More Details

Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.... More Details

Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.... More Details

Investment Cast 316 Stainless. Use #10 FH fasteners.... More Details

MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Max... More Details

MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Max... More Details

MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, co... More Details

MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, co... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Screw for 270160, 270161, 270200, 270230 & 270240... More Details

Release Pin for 270210, 270235 & 270245... More Details

Screw for 2732501 & 2732711... More Details

Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.... More Details

Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.... More Details

LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very l... More Details

LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very l... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details

Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated a... More Details

Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated a... More Details

Forged steel hot dipped, galvanized construction with white vinyl PVC coating. This anchor lead chain features welded, over-sized end links for easy shackle attachment. White PVC coating provides corr... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details

Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is ... More Details

Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is ... More Details

Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fend... More Details

Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fend... More Details

Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fend... More Details

Fits 325175 & 325235 rod holders.... More Details

For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. P... More Details

For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. P... More Details

These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire... More Details

These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire... More Details

These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powde... More Details

Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housi... More Details

Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housi... More Details

Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE appro... More Details

Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE appro... More Details

Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-... More Details

Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-... More Details

Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.... More Details

Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.... More Details

Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.... More Details

The Stud Style Transom Mount Ski Tow is constructed of AISI formed 316 stainless steel rod for corrosion resistance and durability. Designed to bolt through the transom for maximum strength.... More Details

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently whe... More Details

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently whe... More Details

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently whe... More Details

Swivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Fits most cans, glasses, and mugs ... More Details

Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. O... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or verti... More Details

Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or verti... More Details

Vent Plugs are constructed of corrosion resistant injection molded nylon. Designed to press fit into a 1" diameter round hole. Ideal for venting areas that may be subjected to heat or moisture build-u... More Details

Side Mount Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH ... More Details

Wall Switch Panel includes black SPDT switch rated at 15 amps each. 304 Stainless panel.... More Details

Wall Switch Panel includes black SPDT switches rated at 15 amps each. 304 Stainless panel.... More Details

Cast stainless steel base with stamped stainless steel cover. Approved for USCG 2 nautical miles. Use 2 #10 FH fasteners.... More Details

Black LED Combination Bow Light 400058 is approved for USCG 1 NM (Colreg 1 mile) and is constructed of injection molded ABS with a Zamak base. Installs with two #8 RH fasteners (not included). IP67 wa... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details

Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.... More Details

Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.... More Details

Weldable bow eyes are designed to add or replace a tie-down point on your boat's bow. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable for permanent installat... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details

Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.... More Details