Autopilots

Type S for Straight Shaft Helms for Cable Steered Boats with Dash Mounted Wheel Features:Replaces existing helm Electronic clutch disengages for manual steering Rotary drive system Fits behind dash Sa... More Details

Type R for Cable Steered Boats with Auxiliary Outboards Features:Drive connects to kicker Electronic clutch disengages for manual steering Rotary drive system Safety override technology Current 1.25A ... More Details

Type H for Boats with Hydraulic Steering Features:Connects to any hydraulic steering system Rugged Octopus hydraulic pump Adds pushbutton steering to your hydraulic steering Current 3-6A Typical, 15A ... More Details

Type A Controller f/Boats with an Existing Autopliot No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive When... More Details

Spacer Kit for Type T System - 0.51" Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System Product Specifications Dimensions5" L × 5" W × 1" HShipping Weight1 lb Document... More Details

Linkage Arm f/Merc 9.9HP, 4 Stroke - Starboard Side Option f/Type R System Features: Linkage Arm Specifically for Merc 9.9HP 4 Stroke - Starboard Side Option for Type R System Product Specifications D... More Details

Linkage Arm f/Merc 9.9HP, 4 Stroke - Port Side Option f/Type R System Features: Linkage Arm Specifically for Merc 9.9HP 4 Stroke - Port Side Product Specifications Dimensions12" L × 3" W × 3" HShippin... More Details

Verado Adapter Kit Fittings kit for plumbing your Garmin hydraulic autopilot for most Verado steering systems.  What's In The Box? 4 ¼” NPT to ORFS adapters 2 ¼” NPT Male to female adapters 4 NPT male... More Details

Steering Actuator This mechanical linear actuator mounts through the tilt tube of your kicker motor and is driven by the autopilot system to provide precise steering control.  Features: Dimensions: Mo... More Details

Need to replace a split connector? Our replacement split connector helps you easily route cables during installation and eliminates the need to drill large holes in your boat.WARNING: This product can... More Details

Solenoid Power Cable This power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by hydraulic solenoid coils when used in a solenoid conf... More Details

Shadow Drive The GHP™ 10's patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. Use this Shadow Drive attachment to automa... More Details

SeaStar Fittings Kit Fittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems.  What's In The Box? 3 pieces of 1/4” NPT male to marine tube male (3/8” compression) f... More Details

Rudder Feedback Cable 5" x 5" x 1" rudder feedback cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproducti... More Details

Interconnect Cable (Steer-by-Wire) Use this 3 meter interconnect cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to a steer-by-wire controller. Includes bare wire connections fo... More Details

Interconnect Cable (Mechanical/Hydraulic w/SmartPump) Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer unit) to ECU (electronic control unit). Includes ba... More Details

GRF™ 10 - Rudder Feedback Sensor Compatible Devices Pair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses... More Details

GRF™ 10 Extension Cable (5m) Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5m to your cable.WARNING: This product can expose you to chemicals which are known... More Details

GRF™ 10 Extension Cable (15M) Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15M to your cable.WARNING: This product can expose you to chemicals which are kno... More Details

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5m Provide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the electron... More Details

ECU Power Cable Provide power to your electronic control unit (ECU) with our ECU power cable. Simply wire the ECU power cable to your boat battery as one of the last connections made during GHP 10 ins... More Details

Class B Drive Unit For sailboats with up to 79,000 lbs. of displacement. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or ... More Details

Class A Drive Unit For sailboats with up to 28,500 lbs of displacementWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or oth... More Details

CCU Extension Cable 5M Mount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable. WARNING: This product can expose you to chemicals which... More Details

CCU Extension Cable 15M Mount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which ... More Details

Autopilot Check Valve Kit This check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pr... More Details

Wire this buzzer to your course compass unit (CCU) to receive audible alerts from your GHP 10.WARNING: This product can expose you to chemicals which are known to the State of California to cause canc... More Details

Actuator Power Cable 10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductiv... More Details

5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices: GHP™ 10 Marine Autopi... More Details

1.2-Liter Pump Kit Use Garmin's 1.2 Liter per minute (0.32 gallon per minute) pump kit with your Reactor™ 40 system to pump hydraulic fluid to the steering cylinders and steer the boat. Improved with ... More Details

Second Control Unit for NavPilot 711C Kick back, relax and let NavPilot steer you to your destination! FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a va... More Details

The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8" maximum cylinder stroke. WARNING: This product can expose you to chemical... More Details

FAP6112 Rudder Reference Unit for the Furuno NAVpilot Series of Autopilots. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects ... More Details

PUMPOCT16-12 Pump 12V - 1.6 Cubic Inches for RAM Sizes 12-23 1,600CC/MIN OCTOPUS PUMP, 12V, 1.6 Cubic Inches per second (For Ram sizes from 12-23 Cubic Inches in volume). The Octopus pump's industry l... More Details

PUMPOCT10-12 Pump for Rams 7-12 Cubic Inches In Volume The Octopus pump's industry-leading efficiency minimizes power consumption, and the design offers significantly quieter operation. The Octopus pu... More Details

PUMPHRP11-24 Type Autopilot Pump - 24V Autopilot Pump, 24 VDC, 1.1 Cubic Inches Per Second (For Ram Sizes of Up to 13 Cubic Inches in Volume) WARNING: This product can expose you to chemicals which ar... More Details

NavPilot 711C - Control Unit Kick back, relax and let NavPilot steer you to your destination! FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of ... More Details

FAP7002 Processor Unit for NAVpilot 700 SeriesWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. Fo... More Details

Interface Kit NavPilot 700 Series to Yamaha Helm Master  The FAP6310 is an optional interface kit that can be connected to the NavPilot 700 series, allowing it to control the Yamaha Helm Master system... More Details

Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume) WARNING: This product can expose you to chemicals which are known to the State of California to c... More Details

GC001 Gesture Controller for NavPilot 300 Wireless remote control for Furuno Navpilot 300. This product may not be returned to the original point of purchase. Please contact the manufacturer directly ... More Details

FAP3011 Control Head for NavPilot 300  Only Up To 3 Control Heads On 1 System Done Via N2k. This product may not be returned to the original point of purchase. Please contact the manufacturer directly... More Details

Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume) The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series au... More Details