Select Category
Marine Hardware
316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged b...
More Details
Attwood 316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent
Vents, Attwood Marine
$52.16
316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be dama...
More Details
6" Fold-Down Dock Cleat Low-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off. Features: Ideal for small boats and watercraft Low-profile, fold-down design...
More Details
8" Fold-Down Dock Cleat Low-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off. Features: Ideal for small boats and watercraft Low-profile, fold-down design...
More Details
90° P-Trap Fuel Tank Vent - Black with Black Vent Head This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely du...
More Details
90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim Cover Composite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent f...
More Details
Attwood 90° P-Trap Fuel Tank Vent - Flush Mount - Black w/Stainless Steel Vent Head
Vents, Attwood Marine
$66.26
90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowin...
More Details
Cowl Ventilator Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the...
More Details
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Black Plastic Cap
Deck Fills, Attwood Marine
$97.28
Deck Fill for Carbon Canister System - Angled Body & Scalloped Black Plastic Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves buil...
More Details
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Chrome Cap
Deck Fills, Attwood Marine
$126.89
Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into ...
More Details
Attwood Deck Fill f/Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap
Deck Fills, Attwood Marine
$140.99
Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves bu...
More Details
Attwood Deck Fill f/Carbon Canister System - Straight Body & Scalloped Chrome Cap
Deck Fills, Attwood Marine
$119.84
Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built int...
More Details
Attwood Deck Fill f/Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap
Deck Fills, Attwood Marine
$140.99
Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves ...
More Details
Attwood Deck Fill f/Pressure Relief Systems - Angled Body & Scalloped Black Plastic Cap
Deck Fills, Attwood Marine
$148.04
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves bui...
More Details
Attwood Deck Fill f/Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap
Deck Fills, Attwood Marine
$204.44
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves b...
More Details
Attwood Deck Fill f/Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap
Deck Fills, Attwood Marine
$197.39
Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves...
More Details
Deck Fill Replacement Cap & Chain This Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertigh...
More Details
Attwood Deck Fills f/Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap
Deck Fills, Attwood Marine
$148.04
Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap Attwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safe...
More Details
Fender Cleat - 3-1/2" The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable,...
More Details
Flush Hatch Pull The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments, and hatches. Handle is easy to grip, even with gloved hands. Durable ABS c...
More Details
Gasoline Deck Fill - 1-1/2 inch Stainless Steel Alloy For 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key...
More Details
Neat Cleat Stainless Steel - 6" A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage re...
More Details
Soft Grip 13" Steering Wheel This is the ideal steering wheel for bass boats, sport boats, and runabouts. The steering wheel has a patented design that provides a comfortable and firm grip. Also, this...
More Details
Attwood Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"
Gas Springs, Attwood Marine
$42.29
Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2" Attwood is partnered with Stabilus®, the world’s leading supplier of gas springs and related products with over 100,000,000...
More Details
Stainless Gas Spring - 10" - 10mm Socket Popular replacement gas springs for the aftermarket. The pressure tube and rod are made of a stainless steel alloy, while all other exposed components are stai...
More Details
Stainless Gas Spring - 12" - 10mm Socket All series 34 are 20" long expanded and 12" long closed. They have 3/8" ball socket type ends with a rod diameter of 5/16" and a cylinder diameter of 3/4". Sta...
More Details
Straight Fuel Vent - Black Polypropylene A fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets...
More Details
Utility Snap Hook - 4" This Attwood Utility Snap Hook is a versatile and dependable resource for connecting items or establishing a tie-down point. This sturdy zinc-plated steel hook has a spring-load...
More Details
ZAMAK Chrome Plated Zinc Cleats - Pair - 4-1/2" For decades, Attwood has set marine industry standards for great looking, durable, freshwater hardware. Our Perma-Plate® process provides the best chrom...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Beckson 11" x 15" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate
Hatches, Beckson Marine
$267.89
11" x 15" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vert...
More Details
Beckson 14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate
Hatches, Beckson Marine
$375.12
14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Verti...
More Details
Beckson 18x21 Rectangular Hatch - White - ASA Material Acrylonitrile Styrene Acrylate
Hatches, Beckson Marine
$446.38
18x21 Rectangular Hatch - White - ASA Material Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Ver...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Twist-Out Deck Plate The Beckson Twist-out Deck Plate is designed to conceal its mounting fasteners under the quick twist cover. The low profile cover is self-centering, and quickly locks in place wit...
More Details
Twist-Out Deck Plate The Beckson Twist-out Deck Plate is designed to conceal its mounting fasteners under the quick twist cover. The low profile cover is self-centering, and quickly locks in place wit...
More Details
5" x 12" x 1" Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage with...
More Details
5" x 12" x 2" Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage with...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
6" High-Torque Access Plate - Clear Beckson screw-out access plates made their way in many different operating environments. The customers loved the durability and watertight seal, but after high pres...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Stow-Away Deck Plates Safely store watches, wallets, car keys, glasses, any small items. The nylon bag features a sewn-in rigid ring that fits neatly into the deck plate to secure and support extra we...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Beckson Pry-Out Deck Plate Beckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a ...
More Details
Beckson Pry-Out Deck Plate Beckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a ...
More Details
Pry-Out Deck Plates Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non-skid or smooth surfa...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread...
More Details
Drain Port - 4" x 14" x 1"-Depth - White/Clear For ports mounted on a sloped surface. Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. ...
More Details
Drain Port - 4" x 14" x 2"-Depth - White/Clear Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels dra...
More Details
ShipMate Stainless Pick/Probe "Shortly" 5-1/2" - Black Shipmate's Stainless Steel Blade simply does not flex under normal use. It is the perfect hole starter and multi-purpose tool. Its special handle...
More Details
Quick Fist Clamps Securing your equipment just got a whole lot easier! Quick Fist, a one piece rubber clamp, is ideal for stowing or transporting tools. Quick Fist is a rubber clamp that mounts easily...
More Details
Davis Rudder Position Indicator
Steering Systems, Steering Wheels, Instruments, Davis Instruments
$49.34
Rudder Position Indicator Awareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier...
More Details
Super Quick Fist Clamp Super Quick Fist is ideal for holding fire extinguishers, oxygen cylinders, CO2 tanks, and other equipment. Mounts easily with three #10 (5 mm) bolts or screws (not included). C...
More Details
EZ Board Auxiliary Tie Down - 22" Features: 22" Auxiliary Tie Down Weight: 1.5 lbs. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with an...
More Details
EZ Board Boarding Handle - 36" Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the ...
More Details
EZ Board Boarding Handle - 48" Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the ...
More Details
3 Spoke 13.5" Steering Wheel with Power-Grip Knob Lewmar’s steering systems have been world leaders for over 50 years and constantly evolving to meet the performance and aesthetic needs of both cruise...
More Details
Large Handle Kit - Pair Replacement handle kit with both Left and Right-sided handles. Compatible With: Flush 3G hatch sizes 27, 30, 44, 60, 70, Bavaria big rectangle and Bavaria big square Coastline ...
More Details
Ocean Flat Base - Size 60 Hatch With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements,...
More Details
Power Grip Carbon Fiber Wheel Lewmar has upped the steering wheel game. The Power Grip steering wheel gives boaters precision handling with the 3-spoke design. The wheel’s underside is designed with f...
More Details
Right Handed Portlight Handle kit For right-sided handle operation. Compatible with: Older model Lewmar Portlights *Sold as an Individual Product Specifications Dimensions4" L × 3" W × 1" HShipping We...
More Details
Size 10 Low Profile Deck Hatch The Low Profile Hatch has soft styling and sleek looks, ideal for use on a powerboat. Smaller ventilation hatches are suitable for any deck location on sailboats, while ...
More Details
Size 54 Medium Profile Hatch Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewm...
More Details
Size 60 Ocean Hatch - Flange Base With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the element...
More Details
Size 70 Flush 2G Deck Hatch Lewmar pioneered the high-volume flush hatch platform back in 2006, bringing what was then Superyacht styling into mainstream boat production. The precision of the fit mak...
More Details
Size 8 Opening Portlight Lewmar Stainless portlights feature polished stainless 316 outer frames. Inside the boat, they are finished with a chrome plastic trim. The handles and hinges leave the lens c...
More Details
White Trim Ring & Screen Kit Trim kits offer an easy and attractive approach to complete the installation of a hatch inside the cabin. The kits, which are manufactured of ABS plastic, include a trim p...
More Details
Day/Night Solar Vent 4" - White The design threads into included deck plate, and is removable from the outside without tools. On/off fan switches, LED lights, and intake/exhaust switches are accessibl...
More Details
MiniVent 1000 3" - White The MiniVent 1000 is the smallest and most economical solar vent in the Marinco line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet ef...
More Details
Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent...
More Details
Extendable Hinged Bow Roller Extendable Hinged Bow Rollers have a hinged base which allows for shorter or longer overall extension. Extendable Hinged: A - 198mm (7-13/16") B - 125mm (4-15/16") C - 73m...
More Details
Fixed Bow Roller - Size 1 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 1: L - 205mm (8-1/8") B - 72mm (2-7/8") H - 74mm (3") C - 44mm (1-3/4") Product Specification...
More Details
Fixed Bow Roller - Size 2 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 2: L - 320mm (12-5/8") B - 86mm (3-7/16") H - 74mm (3") C - 44mm (1-3/4") Product Specificati...
More Details
Fixed Bow Roller w/Loop Maxwell also featurs a Fixed Bow Roller with an Anchor Loop. Fixed with Loop: A - N/A B - 134mm (5-1/4") C - 75mm (3") D - N/A H - 65mm (2-9/16") H1 - 155mm (6-1/8") L - 460mm ...
More Details
Hinged Bow Roller - Size 1 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 1: L - 320mm (12-5/8") B - 92mm (3-5/8") H - 72mm (2-7/8") h - 133mm (5-1/4") C - 44mm (1-3/...
More Details
Hinged Bow Roller - Size 2 Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain. Size 2: L - 430mm (16-15/16") B - 160mm (5-5/16") H - 100mm (4") h - 190mm (7-1/2") C - 66mm (2-1...
More Details
Levered Chain Stopper f/3/8" or 10mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental...
More Details
Levered Chain Stopper f/5/16" or 8mm Chain Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental...
More Details
HD Turnbuckle Outboard Motor Lock Features: This outboard lock fits the turnbuckle design and has anti-theft by drill protection Constructed of high strength 300 series marine grade stainless steel In...
More Details
Panther Marine Outboard Motor Bracket - Aluminum - Fixed 25HP
Engine Mounts, Panther Products
$491.68
Marine Outboard Motor Bracket - Aluminum - Fixed 25HP Features: The fixed kicker motor bracket is designed for adjustable mount on the transom. Designed for the heavier 4-stroke motors. 5" height adju...
More Details
Marine Outboard Motor Bracket - Aluminum - Max 20HP This adjustable outboard motor bracket is designed for motors up to 20 HP or 115 lbs. Its heavy-duty, light weight aluminum is designed for fresh wa...
More Details
Panther Marine Outboard Motor Bracket - Stainless Steel - Fixed 15HP
Engine Mounts, Panther Products
$188.86
Marine Outboard Motor Bracket - Stainless Steel - Fixed 15HP Features: For engines up to 12hp and 85 lbs max weight (39kg). Heavy-duty Stainless Steel. Rugged Polypropylene mounting board (2" [5cm] th...
More Details
Panther Marine Outboard Motor Bracket - Stainless Steel - Fixed 35HP
Engine Mounts, Panther Products
$253.38
Marine Outboard Motor Bracket - Stainless Steel - Fixed 35HP Features: Works with 4- and 2-Stroke motors up to 35hp and 263 lbs max weight (119kg). Rugged Polypropylene mounting board (2" [5cm] thick)...
More Details
Outboard Motor Bracket - Aluminum - Max 12HP Adjustable outboard motor bracket is designed for motors up to 12hp or 82lbs. This light weight aluminum bracket is designed for freshwater use on both pow...
More Details
Outboard Motor Bracket - Stainless Steel - Max 10HP Stainless Steel Outboard Motor Bracket Up to 10 horse power. The Adjustable outboard motor bracket is stainless steel construction and non-corrosive...
More Details
Outboard Motor Lock Features: The Panther Outboard Lock is a heavy carbon steel design and fits turnbuckle-mounted engines It has a recessed solid brass lock and noise dampeners that reduce rattle Pro...
More Details
1" Chrome Unmarked Pipe Deck Plate Features: Cast Bronze Plain or Chrome Plated 1-1/4 and 1-1/2 Inch Caps have a slot between the holes Deck Plate Key and O-Ring Included Sizes 9, 10 & 11 have 4 mount...
More Details
Barrel Bolt Chrome Plated Bronze Body and Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Eliminate Rattle and Provide Smooth Operation Product Specif...
More Details
Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 4" Dimensions Base: 2-1/8" x 1-1/2" Max Rope Size: 5/16" Product Specifications Dimensions8" L × 4" W × 2" HShipping Weight0.6 lbCountry of Ori...
More Details
Straight Chock (1230) Chrome Plated Zinc Alloy Length Overall: 4" Width: 7/8" Max Rope Size: 3/4" Product Specifications Dimensions7" L × 3" W × 2" HShipping Weight0.45 lbCountry of OriginUSHarmonized...
More Details
Open Base Cleat (1252) Chrome Plated Zinc Alloy Length Overall: 6-1/2" Dimensions Base: 3" x 1-1/8" Max Rope Size: 3/4" Product Specifications Dimensions10" L × 4" W × 3" HShipping Weight0.85 lbCountr...
More Details
Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 6" Dimensions Base: 3" x 1-3/4" Max Rope Size: 7/16" Product Specifications Dimensions7" L × 5" W × 1" HShipping Weight0.6 lbCountry of OriginU...
More Details
8" Chrome Plated Bronze Strap Hinges Specifications: Width Open: 8" Height Pin: 1-1/8" Screw Size: 10 Number of Holes: 6 Product Specifications Dimensions11" L × 4" W × 1" HShipping Weight1.05 lb
More Details
Open Base Cleat (1188) Chrome Plated Zinc Alloy Length Overall: 8" Dimensions Base: 4" x 2-1/8" Max Rope Size: 5/8" Product Specifications Dimensions8" L × 4" W × 2" HShipping Weight0.55 lbCountry of ...
More Details
Perko Black Flush Lock - 2.5" x 2.5" w/Offset Cam Bar & Flexible Polymer Strike
Latches, Perko
$103.51
Black Flush Lock - 2.5" x 2.5" w/Offset Cam Bar & Flexible Polymer Strike Features: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Detents Indicate Open or Closed Position I...
More Details
Cam Bar This cam bar is a spare part of Perko’s Flush Hatch Dog with a rectangular flange. More specifically, it’s the cam bar for size #2. Product Specifications Dimensions6" L × 2" W × 2" HShipping...
More Details
Cowl Ventilator (1312) Chrome Plated Zinc Alloy Cowl w/ Black Plastic Base 3" Duct Threads Into Neck, Hose Clamps Not Required Length: 5-3/4" Width: 4-3/8" Height: 2-5/8" Product Specifications Dimens...
More Details
Chrome Barrel Bolt - 4" Features: Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Elimina...
More Details
Chrome Barrel Bolt - 5" Features: Chrome Plated Bronze Body & High Impact Black Nylon Bulkhead Keeper 3/8" Diameter Bolt Bulkhead Keeper Easily Installs in a 5/8" Hole Includes Friction Pad to Elimina...
More Details
Chrome Plated Brass 3/8" Inset Hinges Features: Semi-Concealed For Inset Doors Chrome Plated Stamped Brass 3/8 Inch Inset Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.2 lbCountr...
More Details
Chrome Plated Bronze Cabin Door Hook - 3" Features: Cast Bronze Chrome Plated Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.15 lbHarmonized Code7419.99.55.00
More Details
Chrome Plated Zinc Cabin Door Hook - 1-3/4" Features: Chrome Plated Zinc Alloy Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.1 lbHarmonized Code7907.00.60.00
More Details
Chrome Plated Zinc Cabin Door Hook - 2-1/4" Features: Chrome Plated Zinc Alloy Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.1 lbHarmonized Code7907.00.60.00
More Details
Chrome Plated Zinc Cabin Door Hook - 2" Features: Chrome Plated Zinc Alloy Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.1 lbHarmonized Code7907.00.60.00
More Details
Chrome Plated Zinc Cabin Door Hook - 3" Features: Chrome Plated Zinc Alloy Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.15 lbHarmonized Code7907.00.60.00
More Details
Chrome Plated Zinc Hasp - 3" Features: Chrome Plated Zinc Alloy Length Closed: 3" Width: 1" Padlock Clearance: 1/4" Product Specifications Dimensions8" L × 3" W × 1" HShipping Weight0.2 lbHarmonized C...
More Details
Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4" Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6 Product Specifications Dim...
More Details
Combination Gas Fill & Tank Vent for 2" Hose - Diesel Features: Chrome Plated Bronze Straight Neck Integral Tank Vent with Flame Arrestor O-Ring and Integral Retainer on Cap Included Ground Wire Requi...
More Details
Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck Features: 35° Angled Neck Black Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required Flip Top Cap Specifications: ...
More Details
Cowl Ventilator (0870) Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base 3" Duct Thread into Neck, Hose Clamps Not Required Cowl Opening Square: 7-1/3" Product Specifications Dimensions6" L × 5...
More Details
Cupboard Bolt - 2-1/8" x 1-1/2" Features: Chrome Plated Zinc Alloy Black Polymer Slide and Knob Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.15 lbHarmonized Code8301.40.60.30
More Details
Door Button w/Spring Features: Chrome Plated Zinc Alloy Black Polymer Button Supplied with Phosphor Bronze Tension Spring Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.1 lbCountr...
More Details
Door Catches - Black Nylon - Pair Specs: Black Polymer Stud Dimensions: 1-1/8" x 3/8" Catch Dimensions: 1-3/8" x 7/8" Mounting Screw Size: 4 R.H. Product Specifications Dimensions6" L × 3" W × 1" HShi...
More Details
Door Catches - White Nylon/Stainless - Pair Specs: White Polymer Stainless Steel Mounting & Keeper Screws Catch Screw Size: 3/4 x #8 Catch Dimensions: 1-1/4" x 5/8" Mounting Screw Size: 4 R.H. Product...
More Details
Edge Mount Rowlock Socket Plain Plated Zinc Alloy Black Polymer Bearings For Use with Fig. 1227, 1262 or 1267 Rowlock Horns Screw Size #10 Product Specifications Dimensions7" L × 4" W × 3" HShipping W...
More Details
Eye Strap - 5/16" I.D. Features: Chrome Plated Zinc Alloy Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.15 lbCountry of OriginUNITED STATESHarmonized Code7907.00.60.00
More Details
Fender Lock Chrome Plated Zinc Alloy The eye is to be permanently attached to the fender line Product Specifications Dimensions5" L × 3" W × 2" HShipping Weight0.2 lbCountry of OriginUNITED STATESHarm...
More Details
Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Adjustable Cam Bar Features: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Detents Indicate Open or Closed Position Insta...
More Details
Perko Flush Latch - Non-Locking - 2.5" x 2.5" w/Offset Cam Bar & Flexible Polymer Strike
Latches, Perko
$84.13
Flush Latch - Non-Locking - 2.5" x 2.5" with Offset Cam Bar & Flexible Polymer Strike Features: Black Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Detents Indicate Open or Closed...
More Details
Surface Mount Flush Latch - Offset Cam Bar - 2.5" Hole - White Features: White plastic and chrome plated zinc alloy Offset cam bar For surface thickness: 1/8" to 3/4" (0.3cm to 1.9cm) Face plate O.D.:...
More Details
Flush Lock & Latch for Smooth or Carpeted Surfaces Non-locking latch For smooth or carpeted surfaces Stainless Steel "D" Ring Handle Stem and Lock Nut Two O-Rings for Increased Water Resistance Positi...
More Details
Flush Lifting Handle Chrome Plated Zinc Alloy Dimensions: 3" x 2-1/4" Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.3 lbCountry of OriginUNITED STATESHarmonized Code7907.00.60.00...
More Details
Flush Mount Latch - Straight Cam Bar - 2.5" Hole - Black Features: Black plastic and chrome plated zinc alloy Straight cam bar For surface thickness : 1/8" to 3/4"(0.3cm to 1.9cm) Face Plate O.D.: 3" ...
More Details
Flush Pull Chrome Plated Zinc Alloy Dimmensions: 3-11/16" x 1-11/16" Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.3 lbCountry of OriginUSHarmonized Code7907.00.60.00
More Details
Flush Ring Pull - Chrome Plated Zinc Specs: Chrome Plated Zinc Alloy Face Plate Dimensions: 1-3/4" x 1-3/8" Screw Size: 6 Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.1 lbCountr...
More Details
Mortise Latch Set with Turn Button Features: Chrome Plated Zinc AlloyTurn Button Lock Bevel can be Reversed During Installation Specifications: Door Thickness: 1" - 1-3/8" Escutcheon Dimensions Screw...
More Details
Mortise Lock Set with Bolt Features: Chrome Plated Zinc Alloy Locks by Turn Bottom from Inside or Key from Outside Bevel Can be Reversed During Installation Specifications: Door Thickness: 1" - 1-3/8"...
More Details
Plastic Deck Plate Key - Black The keys for 1" Thru 1-1/2" Deck Plates have a 1" Spade on the handle that allows them to fit many other "Slot" type opening deck plates. Specifications: Length: 3.38" W...
More Details
Pole Storage Clips - Black - Pair Features: Soft Black U.V. StabilizedFits 3/4 or 7/8 Inch Diameter Tubing Also Available in Camo Line (Dealer Package Only) Specifications: Pole O.D. Size: 3/4" Dimens...
More Details
Ribbed Type Rowlock Horns - Chrome Plated Zinc - Pair Specs: Finish: Chrome Shank O.D.: 1/2" Shank Length: 1-3/4" Between Horns: 1-3/4" Product Specifications Dimensions8" L × 5" W × 1" HShipping Weig...
More Details
Rope Deck Pipe (0757) Chrome Plated Zinc Alloy Max Rope Size 1" O.D. Flange: 3-3/8" Product Specifications Dimensions7" L × 4" W × 3" HShipping Weight0.5 lbCountry of OriginUSHarmonized Code7907.00.60...
More Details
Round Flush Ring Pull - 2" - Chrome Plated Zinc Specs: Chrome plated zinc alloy Face Plate O.D.: 2" Screw Size: 6 Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.1 lbCountry of Ori...
More Details
Round Type Rowlock Horns - Chrome Plated Zinc Features: Chrome plated zinc alloy Shank O.D.:1/2" (1.3cm) Shank Length: 1-3/4" (4.4cm) I.D. Horns: 2" (5.1cm) Product Specifications Dimensions8" L × 5" ...
More Details
Round Type Rowlock Horns - Plain Zinc Features: Natrual finish zinc alloy Shank O.D.:1/2" (1.3cm) Shank Length: 1-3/4" (4.4cm) I.D. Horns: 2" (5.1cm) Product Specifications Dimensions8" L × 5" W × 1" ...
More Details
Rowlock Socket - Bronze Specs: Length: 2-3/8" Width: 7/8" Depth: 1" Screw Size: #10 Product Specifications Dimensions6" L × 3" W × 2" HShipping Weight0.4 lbCountry of OriginUSHarmonized Code7419.99.55...
More Details
White Flip Top Cap Fills for 1-1/2" Hose - White Features: White Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve The...
More Details
Side Mount Rowlock Sockets Plain or Chrome Plated Zinc Alloy Black Polymer Bearings For Use with Fig. 1227, 1262 or 1267 Rowlock Horns Screw Size #10 Product Specifications Dimensions5" L × 3" W × 2" ...
More Details
Skene Bow Chocks Features: Chrome Plated Zinc AlloyPort and Starboard Pair Max Rope Size: 1/2" Length Overall: 3-1/2" Width: 7/8" Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.3 ...
More Details
Spare Bevel with Cam This is a spare part for Perko’s Mortise Latch Set. Product Specifications Dimensions3" L × 2" W × 2" HShipping Weight0.1 lb Documentation Installation GuideDownload PDF
More Details
Spare Waste Cap with O-Ring Features: Black Polymer Cap Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.05 lbHarmonized Code7907.00.60.00
More Details
Spring Clamps 1" - 1-3/4" - Pair Features: Stainless Steel Minimum I.D.: 1" Max I.D.: 1-3/4" Projection: 2-1/4" Width Clamp: 5/8" Product Specifications Dimensions6" L × 3" W × 2" HShipping Weight0.15...
More Details
Spring Clamps 5/8" - 1-1/4" - Pair Features: Stainless Steel Minimum I.D.: 5/8" Max I.D.: 1-1/4" Projection: 1-1/2" Width Clamp: 1/2" Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight...
More Details
Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.2 lbCoun...
More Details
Stainless Steel Boat Hook Holders - Pair Features: Stainless Steel Max Pole O.D.: 1-1/2" Length: 3-1/2" Width: 1" Screw Size: #6 Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.2 l...
More Details
Stainless Steel Clamshell Ventilator 1-5/8" x 1-1/2" Features: Polished Stainless Steel 1-5/8" x 1-1/2" Screw Size: 4 Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.1 lb
More Details
Stainless Steel Clamshell Ventilator 2" x 2" Features: Polished Stainless Steel 2" x 2" Screw Size: 6 Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.1 lb
More Details
Stainless Steel Round Locker Ventilator 2-1/2" Features: Polished Stainless Steel Round 2-1/2" Product Specifications Dimensions5" L × 3" W × 1" HShipping Weight0.2 lbCountry of OriginTAIWANHarmonized...
More Details
Stainless Steel Round Locker Ventilator 3-1/4" Features: Polished Stainless Steel Round 3-1/4"
More Details
Perko Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"
Latches, Perko
$107.89
Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8" Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Di...
More Details
Perko Surface Mount & Latch - White Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"
Latches, Perko
$107.89
Surface Mount & Latch - White Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8" Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Di...
More Details
Surface Mount Drawer Pull - Chrome Plated Zinc Specs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6 Product Specifications Dimensions7" L × 3" W × 1" HShipping We...
More Details
Surface Mount Latch for Smooth & Carpeted Surfaces with Offset Cam Bar Features: Black Polymer Body Chrome Plated Zinc Alloy, Black or White Polymer "T" Handle Stainless Steel Stem Latch (Non-Locking)...
More Details
Swivel Eye Hasp - 3" - Chrome Plated Zinc Features: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latch Specs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6 Product Sp...
More Details
Utility/Wardrobe Hook Features: Chrome Plated Zinc Projection: 1-3/8" Base Width: 1-1/8" Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.05 lbHarmonized Code8302.50.00.00
More Details
PRO Shaft Seal 1-1/2" Shaft & 2-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 1-1/2" Shaft & 2-1/4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 1-1/4" Shaft & 2-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 1-1/4" Shaft & 2-1/4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 1-1/4" Shaft & 2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PRO Shaft Seal 1-3/4" Shaft & 3-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 1-3/4" Shaft & 3" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PSS PRO Shaft Seal 2-1/2" Shaft & 3-1/2" Tube
Shaft Seals, PSS Shaft Seal
$1,330.46
You save:
$223.36
PSS Pro Shaft Seal - 2 1/2" Shaft & 3 1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows...
More Details
PRO Shaft Seal 2-1/2" Shaft & 4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PSS PRO Shaft Seal 2-1/4" Shaft & 3-1/2" Tube
Shaft Seals, PSS Shaft Seal
$1,330.46
You save:
$223.36
PRO Shaft Seal 2-1/4" Shaft & 3-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a se...
More Details
PRO Shaft Seal 2-1/4" Shaft & 4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PRO Shaft Seal 2-3/4" Shaft & 4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing PSS Shaft Seal's proven stainless steel and carbon sealing components but adding reinforced silicone be...
More Details
PRO Shaft Seal 2" Shaft & 3-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PRO Shaft Seal 2" Shaft & 3" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a secondary ...
More Details
PRO Shaft Seal 3-1/2" Shaft & 5" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PRO Shaft Seal 3" Shaft & 4-1/2" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components but adds reinforced silicone bellows, a second...
More Details
PSS Shaft Seal 1-1/4" Shaft 1-3/4" Tube Shaft Diameter: 1-1/4" Stern Tube Diameter (D): 1-3/4" to 1-7/8" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.8...
More Details
PSS Shaft Seal 1-1/4" Shaft 2-1/4" Tube Shaft Diameter: 1-1/4" Stern Tube Diameter (D): 2-1/4" to 2-3/8" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.8...
More Details
PSS Shaft Seal 1-1/4" Shaft 2-1/2" Tube Shaft Diameter: 1-1/4" Stern Tube Diameter (D): 2-1/2" to 2-5/8" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.8...
More Details
PSS Shaft Seal 1-1/4" Shaft 2" Tube Shaft Diameter: 1-1/4" Stern Tube Diameter (D): 2" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.875" Carbon Cuff Di...
More Details
PSS Shaft Seal 1-1/2" Shaft 2-1/4" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 2-1/4" to 2-3/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-1/2" Shaft 2-1/2" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 2-1/2" to 2-5/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-1/2" Shaft 2-3/4" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 2-3/4" to 2-7/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-1/2" Shaft 3-1/2" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 3-1/2" to 3-5/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-1/2" Shaft 3" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 3" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Carbon Cuff D...
More Details
PSS Shaft Seal 1-3/4" Shaft 2-1/2" Tube Shaft Diameter: 1-3/4" Stern Tube Diameter (D): 2-1/2" to 2-5/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-3/4" Shaft 2-3/4" Tube Shaft Diameter: 1-3/4" Stern Tube Diameter (D): 2-3/4" to 2-7/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-3/4" Shaft 3-1/4" Tube Shaft Diameter: 1-3/4" Stern Tube Diameter (D): 3-1/4" to 3-3/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-3/4" Shaft 3-1/2" Tube Shaft Diameter: 1-3/4" Stern Tube Diameter (D): 3-1/2" to 3-5/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-3/4" Shaft 3" Tube Shaft Diameter: 1-3/4" Stern Tube Diameter (D): 3" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Carbon Cuff D...
More Details
PSS Shaft Seal 1-1/8" Shaft 1-1/2" Tube Shaft Diameter: 1-1/8" Stern Tube Diameter (D): 1-1/2" to 1-5/8" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2...
More Details
PSS Shaft Seal 1-1/8" Shaft 1-3/4" Tube Shaft Diameter: 1-1/8" Stern Tube Diameter (D): 1-3/4" to 1-7/8" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2...
More Details
PSS Shaft Seal 1-3/8" Shaft 2-1/2" Tube Shaft Diameter: 1-3/8" Stern Tube Diameter (D): 2-1/2" to 2-5/8" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.8...
More Details
PSS Shaft Seal 1-1/2" Shaft 3-1/4" Tube Shaft Diameter: 1-1/2" Stern Tube Diameter (D): 3-1/4" to 3-3/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3...
More Details
PSS Shaft Seal 1-3/8" Shaft 2-1/4" Tube Shaft Diameter: 1-3/8" Stern Tube Diameter (D): 2-1/4" to 2-3/8" Total Length (A): 7.38" Total Length (compressed) (Compressed A): 6.38" Rotor Diameter (B): 2.8...
More Details
PSS Shaft Seal 1" Shaft 1-1/2" Tube Shaft Diameter: 1" Stern Tube Diameter (D): 1-1/2" to 1-5/8" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2.375" Ca...
More Details
PSS Shaft Seal 1" Shaft 1 3/4" Tube Shaft Diameter: 1" Stern Tube Diameter (D): 1-3/4" to 1-7/8" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2.375" Ca...
More Details
PSS Shaft Seal 1" Shaft 2-1/4" Tube Shaft Diameter: 1" Stern Tube Diameter (D): 2-1/4" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2.375" Carbon Cuff ...
More Details
PSS Shaft Seal 1" Shaft 2" Tube Shaft Diameter: 1" Stern Tube Diameter (D): 2" Total Length (A): 6.975" Total Length (compressed) (Compressed A): 6.225" Rotor Diameter (B): 2.375" Carbon Cuff Diameter...
More Details
PSS Shaft Seal 2-1/4" Shaft 3-1/2" Tube Shaft Diameter: 2-1/4" Stern Tube Diameter (D): 3-1/2" to 3-5/8" Total Length (A): 9.625" Total Length (compressed) (Compressed A): 8.375" Rotor Diameter (B): 4...
More Details
PSS Shaft Seal 2-1/4" Shaft 4" Tube Shaft Diameter: 2-1/4" Stern Tube Diameter (D): 4" Total Length (A): 9.625" Total Length (compressed) (Compressed A): 8.375" Rotor Diameter (B): 4.2" Carbon Cuff Di...
More Details
PSS Shaft Seal 2-1/2" Shaft 3-1/2" Tube Shaft Diameter: 2-1/2" Stern Tube Diameter (D): 3-1/2" to 3-5/8" Total Length (A): 9.625" Total Length (compressed) (Compressed A): 8.375" Rotor Diameter (B): 4...
More Details
PSS Shaft Seal 2-1/2" Shaft 4" Tube Shaft Diameter: 2-1/2" Stern Tube Diameter (D): 4" Total Length (A): 9.625" Total Length (compressed) (Compressed A): 8.375" Rotor Diameter (B): 4.2" Carbon Cuff Di...
More Details
PSS Shaft Seal 2" Shaft 2-3/4" Tube Shaft Diameter: 2" Stern Tube Diameter (D): 2-3/4" to 2-7/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Car...
More Details
PSS Shaft Seal 2" Shaft 3-1/4" Tube Shaft Diameter: 2" Stern Tube Diameter (D): 3-1/4" to 3-3/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Car...
More Details
PSS Shaft Seal 2" Shaft 3-½" Tube Shaft Diameter: 2" Stern Tube Diameter (D): 3-1/2" to 3-5/8" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Carbo...
More Details
PSS Shaft Seal 2" Shaft 3" Tube Shaft Diameter: 2" Stern Tube Diameter (D): 3" Total Length (A): 9.175" Total Length (compressed) (Compressed A): 8.175" Rotor Diameter (B): 3.75" Carbon Cuff Diameter ...
More Details
3" Shaft - 5-1/2" Stern Tube The PSS Shaft Seal is the #1 selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders and boat ya...
More Details
PSS Shaft Seal 3" Shaft 4-1/2" Tube Shaft Diameter: 3" Stern Tube Diameter (D): 4-1/2" to 4-5/8" Total Length (A): 10.425" Total Length (compressed) (Compressed A): 9.175" Rotor Diameter (B): 5" Carbo...
More Details
Shaft Seal 45mm Shaft & 3-1/4" Tube This Type A PSS Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the station...
More Details
Hose Barb Plug This is a plug for the PSS Shaft Seal hose barb. If your boat will not exceed 10 knots under power, then the PSS Shaft Seal does not require positive water feed. The PSS Shaft Seal can ...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 2 1/2" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 2 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 2 1/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 2 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 2 3/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 2 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 3 1/2" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 3 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 3 1/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 3 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/2" Shaft 3" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/2" SHAFT 3" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1 1/4" Shaft 1 3/4" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/4" SHAFT 1 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/4" Shaft 2 1/2" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/4"" SHAFT 2 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agi...
More Details
PSS Shaft Seal Maintenance Kit 1 1/4" Shaft 2 1/4" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/4" SHAFT 2 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/4" Shaft 2" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/4" SHAFT 2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1 1/8" Shaft 1 1/2" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/8" SHAFT 1 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 1/8" Shaft 1 3/4" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 1/8" SHAFT 1 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/4" Shaft 2 1/2" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/4" SHAFT 2 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/4" Shaft 2 3/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/4" SHAFT 2 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/4" Shaft 3 1/2" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/4" SHAFT 3 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/4" Shaft 3 1/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/4" SHAFT 3 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/4" Shaft 3" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/4" SHAFT 3" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1 3/8" Shaft 2 1/2" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/8" SHAFT 2 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1 3/8" Shaft 2 1/4" Tube
Shaft Seals, PSS Shaft Seal
$187.14
You save:
$31.41
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1 3/8" SHAFT 2 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 1" Shaft 1 3/4" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1" SHAFT 1 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1" Shaft 1-1/2" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1" SHAFT 1 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1" Shaft 2 1/4" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1" SHAFT 2 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 1" Shaft 2" Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 1" SHAFT 2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or che...
More Details
PSS Shaft Seal Maintenance Kit 2 1/2" Shaft 3 1/2" Tube
Shaft Seals, PSS Shaft Seal
$339.26
You save:
$56.95
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2 1/2" SHAFT 3 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 2 1/2" Shaft 4" Tube
Shaft Seals, PSS Shaft Seal
$339.26
You save:
$56.95
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2 1/2" SHAFT 4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 2 1/4" Shaft 3 1/2" Tube
Shaft Seals, PSS Shaft Seal
$339.26
You save:
$56.95
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2 1/4" SHAFT 3 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, agin...
More Details
PSS Shaft Seal Maintenance Kit 2 1/4" Shaft 4" Tube
Shaft Seals, PSS Shaft Seal
$339.26
You save:
$56.95
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2 1/4" SHAFT 4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 2" Shaft 2 3/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2" SHAFT 2 3/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 2" Shaft 3 1/2" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2" SHAFT 3 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 2" Shaft 3 1/4" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2" SHAFT 3 1/4" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit 2" Shaft 3" Tube
Shaft Seals, PSS Shaft Seal
$237.85
You save:
$39.92
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 2" SHAFT 3" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or che...
More Details
PSS Shaft Seal Maintenance Kit 3" Shaft 4 1/2" Tube
Shaft Seals, PSS Shaft Seal
$481.73
You save:
$80.86
PSS Shaft Seal Maintenance & Parts Replacement Kit FOR 3" SHAFT 4 1/2" TUBE As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or...
More Details
PSS Shaft Seal Maintenance Kit f/30mm Shaft & 1-3/4" Stern Tube
Shaft Seals, PSS Shaft Seal
$144.88
You save:
$24.32
Maintenance Kit for 30mm Shaft & 1-3/4" Stern Tube As with any rubber or silicone hose below the waterline, the PSS bellows must be inspected regularly for any signs of wear, aging, or chemical deteri...
More Details
Retention Collar for 30mm Shaft The PYI Shaft Retention Collar is designed to help retain the propeller or rudder shaft in your vessel in the event of catastrophic coupling failure or if the shaft com...
More Details
Silicone Shaft Seal 2" Shaft & 2-3/4" Tube The PSS PRO Shaft Seal is a mechanical face seal utilizing PSS's proven stainless steel and carbon sealing components, with a few additions. These additions ...
More Details
R & D Engine Mount Kit - 4 Engine Mounts f/Small Yanmar Engines (Yanmar*)
Engine Mounts, R & D Marine
$1,068.48
You save:
$179.37
Engine Mount Kit - 4 Engine Mounts f/Small Yanmar Engines (Yanmar*) * Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series engines The R & D Marine Engine Mounts are designed specifically fo...
More Details
R & D Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per Mount
Engine Mounts, R & D Marine
$163.00
You save:
$27.35
Engine Mount w/4" Footprint - 12mm Stud - 30-90lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to abs...
More Details
R & D Engine Mount w/4" Footprint - 3/4" Stud - 250-563lbs Capacity Per Mount
Engine Mounts, R & D Marine
$259.58
You save:
$43.57
Engine Mount w/4" Footprint - 3/4" Stud - 250-563lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to a...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 120-410lbs Capacity Per Mount
Engine Mounts, R & D Marine
$223.36
You save:
$37.49
Engine Mount w/4" Footprint - 5/8" Stud - 120-410lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to a...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 300-680lbs Capacity Per Mount
Engine Mounts, R & D Marine
$211.29
You save:
$49.56
Engine Mount w/4" Footprint - 5/8" Stud - 300-680lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to a...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 300lbs Capacity Per Mount
Engine Mounts, R & D Marine
$156.95
You save:
$26.35
Engine Mount w/4" Footprint - 5/8" Stud - 300lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absor...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 50-175lbs Capacity Per Mount
Engine Mounts, R & D Marine
$223.36
You save:
$37.49
Engine Mount w/4" Footprint - 5/8" Stud - 50-175lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to ab...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity Per Mount
Engine Mounts, R & D Marine
$169.02
You save:
$28.38
Engine Mount w/4" Footprint - 5/8" Stud - 70-201lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to ab...
More Details
R & D Engine Mount w/4" Footprint - 5/8" Stud - 80-230lbs Capacity Per Mount
Engine Mounts, R & D Marine
$223.36
You save:
$37.49
Engine Mount w/4" Footprint - 5/8" Stud - 80-230lbs Capacity Per Mount The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to ab...
More Details
R & D Engine Mount w/6.85" Footprint - 5/8" Stud - 120-410lbs Capacity Per Mount (Yanmar***)
Engine Mounts, R & D Marine
$283.73
You save:
$47.62
Engine Mount w/6.85" Footprint - 5/8" Stud - 120-410lbs Capacity Per Mount *** Designed as a rear mount for the Yanmar 4JH series engine The R & D Marine Engine Mounts are designed specifically for th...
More Details
R & D Engine Mount w/6.85" Footprint - 5/8" Stud - 50-175lbs Capacity Per Mount (Yanmar*)
Engine Mounts, R & D Marine
$283.73
You save:
$47.62
Engine Mount w/6.85" Footprint - 5/8" Stud - 50-75lbs Capacity Per Mount *Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series engines The R & D Marine Engine Mounts are designed specificall...
More Details
R & D Engine Mount w/6.85" Footprint - 5/8" Stud - 80-230lbs Capacity Per Mount (Yanmar**)
Engine Mounts, R & D Marine
$283.73
You save:
$47.62
Engine Mount w/6.85" Footprint - 5/8" Stud - 80-230lbs Capacity Per Mount ** Designed as a front mount for the Yanmar 4JH series engine The R & D Marine Engine Mounts are designed specifically for the...
More Details
R & D Flexible Shaft Coupling f/4" B/W, Hurth - 5HP/100RPM Capacity
Shaft Couplers, R & D Marine
$362.19
You save:
$60.81
Flexible Shaft Coupling for 4" B/W, Hurth - 5HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contou...
More Details
R & D Flexible Shaft Coupling f/4" B/W, Hurth - 8HP/100RPM Capacity
Shaft Couplers, R & D Marine
$404.46
You save:
$67.89
Flexible Shaft Coupling for 4" B/W, Hurth - 8HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contou...
More Details
R & D Flexible Shaft Coupling f/4" Yanmar - 3HP/100RPM Capacity
Shaft Couplers, R & D Marine
$350.12
You save:
$58.78
Flexible Shaft Coupling for 4" Yanmar - 3HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contoured ...
More Details
R & D Flexible Shaft Coupling f/5" B/W, Hurth - 13HP/100RPM Capacity
Shaft Couplers, R & D Marine
$645.92
You save:
$108.43
Flexible Shaft Coupling for 5" B/W, Hurth - 13HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The conto...
More Details
R & D Flexible Shaft Coupling f/5" B/W, Hurth - 20HP/100RPM Capacity
Shaft Couplers, R & D Marine
$1,116.77
You save:
$187.48
Flexible Shaft Coupling for 5" B/W, Hurth - 20HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The conto...
More Details
R & D Flexible Shaft Coupling f/5" B/W, Hurth - 8HP/100RPM Capacity
Shaft Couplers, R & D Marine
$657.99
You save:
$110.46
Flexible Shaft Coupling for 5" B/W, Hurth - 8HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contou...
More Details
R & D Flexible Shaft Coupling f/5" Yanmar - 10HP/100RPM Capacity
Shaft Couplers, R & D Marine
$645.92
You save:
$108.43
Flexible Shaft Coupling for 5" Yanmar - 10HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contoured...
More Details
R & D Flexible Shaft Coupling f/6" Twin Disc - 28HP/100RPM Capacity
Shaft Couplers, R & D Marine
$1,442.75
You save:
$242.20
Flexible Shaft Coupling for 6" Twin Disc - 28HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contou...
More Details
R & D Flexible Shaft Coupling f/B/W, Hurth - 3HP/100PRM Capacity
Shaft Couplers, R & D Marine
$350.12
You save:
$58.78
Flexible Shaft Coupling for 4" B/W, Hurth - 3HP/100RPM Capacity The R&D Flexible Couplings are fabricated from a contoured flexible disc molded in tough yet resilient new type polyurethane. The contou...
More Details
R & D Flexible Shaft Coupling f/5" B/W, Hurth, & Volvo - 25HP/100RPM Capacity
Shaft Couplers, R & D Marine
$1,448.78
You save:
$243.23
Flexible Shaft Coupling for 5" B/W, Hurth, & Volvo - 25HP/100RPM Capacity The R & D Marine Flexible Coupling consists of a flexible disc molded with a polyester elastomer. The disc gives clearance for...
More Details
Split Half Coupling for Volvo - .75" The R & D Marine Steel Clamp Half Coupling has a 4" diameter flange size. Steel Clamp Half Couplings can accommodate the variations that occur with normal shaft to...
More Details
3/4" x 12" Threaded Aluminum Pipe 12" length of threaded, bright anodized, 3/4" aluminum pipe for antenna standoff. Threaded all the way through with 7/8-14 thread so it can be cut to length. Specific...
More Details
Lay Down Hook Folding hooks of forged aluminum for securing Rupp Sidekicks, Standard outrigger bases or marine antennas in the lay-down position. Folds out of the way when not in use. Sold individuall...
More Details
Schaefer Anchor Hanger f/Danforth Style Anchors
Anchoring Accessories, Accessories, Accessories, Schaefer Marine
$179.56
Anchor Hanger for Danforth Style Anchors Features: Pulpit Mount Anchor Hanger Works with Danforth Style Fluke Anchors from 8 lbs to 22 lbs with Stock diameters of 1/2" (12mm) to 3/4" (19mm) 316 Highly...
More Details
Transom Door Latch Handle - Catch Plate Included Ideal for one handed operation of Transom Doors. 316 SS Hand Buffed and Electro-Polished. Includes Handle and Catch Plate. Specifications: Weight 2.8 ...
More Details
Schmitt Marine - Ongaro Wheel - 15.5" f/3/4" Teleflex Tapered Shaft
Steering Wheels, Schmitt Marine
$1,823.84
Ongaro Wheel - 15.5" for 3/4" Teleflex Tapered Shaft Ongaro family of the steering wheels to replace the OEM steering wheel of luxury boats. This top-grade product is expertly made in compliance wit...
More Details
Schmitt Marine - Ongaro Wheel - 15.5" w/Knob for 3/4" Teleflex Tapered Shaft
Steering Wheels, Schmitt Marine
$1,922.11
Ongaro Wheel - 15.5" with Knob for 3/4" Teleflex Tapered Shaft Ongaro family of the steering wheels to replace the OEM steering wheel of luxury boats. This top-grade product is expertly made in compl...
More Details
Schmitt Marine 12mm Center Nut f/7XX Series Steering Wheels f/Uflex Helms
Steering Wheels, Schmitt Marine
$67.54
12mm Center Nut for 7XX Series Steering Wheels for Uflex Helms Features: Stainless Steel Construction Fits Uflex Helms Product Specifications Dimensions2" L × 2" W × 1" HShipping Weight0.6 lbCountry o...
More Details
Schmitt Marine 170 Finger Grip Destroyer 5-Spoke 13.5" Stainless Steel Cap 3/4" Tapered Shaft w/Knob
Steering Wheels, Schmitt Marine
$320.49
170 Finger Grip Destroyer 5-Spoke 13.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This ...
More Details
Schmitt Marine 170 Finger Grip Destroyer 5-Spoke 15.5" Stainless Steel Cap 3/4" Tapered Shaft w/Knob
Steering Wheels, Schmitt Marine
$343.76
170 Finger Grip Destroyer 5-Spoke 15.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This ...
More Details
Schmitt Marine 5/8" Center Nut f/7XX Series Steering Wheels f/Teleflex Helms
Steering Wheels, Schmitt Marine
$66.27
5/8" Center Nut for 7XX Series Steering Wheels for Teleflex Helms Features: Stainless Steel Center Nut Fits Teleflex Helms Product Specifications Dimensions2" L × 2" W × 1" HShipping Weight0.6 lbCount...
More Details
Schmitt Marine Burano Wheel 14" 3/4" Tapered Shaft Black Polyurethane w/Stainless Spoke Includes Center Cap/Nut
Steering Wheels, Schmitt Marine
$588.25
Burano Wheel 14" 3/4" Tapered Shaft Black Polyurethane with Stainless Spoke Includes Center Cap/Nut Features: 14" Black Polyurethane Stainless steel spokes Chrome accents Hydrographic spoke inserts Ch...
More Details
Schmitt Marine Burano Wheel 14" 3/4" Tapered Shaft Burl Polyurethane w/Stainless Spoke Includes Center Cap/Nut
Steering Wheels, Schmitt Marine
$626.46
Burano Wheel 14" 3/4" Tapered Shaft Burl Polyurethane with Stainless Spoke Includes Center Cap/Nut Features: 14" Burl Polyurethane Stainless steel spokes Chrome accents Hydrographic spoke inserts Chro...
More Details
Schmitt Marine Carbon Fiber Primus Wheel w/Knob 13.5" w/Sanntoprene Finger Grip 3/4" Tapered Shaft w/CF Nut
Steering Wheels, Schmitt Marine
$2,537.99
Carbon Fiber Primus Wheel with Knob 13.5" with Sanntoprene Finger Grip 3/4" Tapered Shaft with CF Nut Few components on a boat are touched as frequently as its steering wheel. That’s why Schmitt Marin...
More Details
Schmitt Marine Destroyer Wheel - 13.5" Model 170 - Fits 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$218.55
Destroyer Wheel - 13.5" Model 170 - Fits 3/4" Tapered Shaft The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes...
More Details
Schmitt Marine Evo Pro 316 Cast Stainless Steel Steering Wheel - 13.5" Diameter
Steering Wheels, Schmitt Marine
$550.32
Evo Pro 316 Cast Stainless Steel Steering Wheel - 13.5" Diameter Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke ...
More Details
Schmitt Marine Evo Pro 316 Cast Stainless Steel Steering Wheel w/Control Knob - 13.5" Diameter
Steering Wheels, Schmitt Marine
$633.23
Evo Pro 316 Cast Stainless Steel Steering Wheel with Control Knob - 13.5" Diameter Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless s...
More Details
Schmitt Marine Evo Pro 316 Cast Stainless Steel Steering Wheel w/Control Knob - 15.5" Diameter
Steering Wheels, Schmitt Marine
$662.00
Evo Pro 316 Cast Stainless Steel Steering Wheel with Control Knob - 15.5" Diameter Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless s...
More Details
Schmitt Marine Faux Center Nut - Chrome/Plastic - 1/2"& 3/4" Base f/Cast Steering Wheels
Steering Wheels, Schmitt Marine
$5.64
Faux Center Nut - Chrome/Plastic - 1/2" & 3/4" Base for Cast Steering Wheels The look of Stainless Steel at a fraction of the cost. Made with Chrome ABS Plastic. Product Specifications Dimensions9" L ...
More Details
Schmitt Marine Faux Center Nut - Stainless Steel - 1/2" and 5/8" M12 Base Included f/Cast Steering Wheels
Steering Wheels, Schmitt Marine
$37.37
Faux Center Nut - Stainless Steel - 1/2" & 5/8" M12 Base Included for Cast Steering Wheels Features: A lighter-weight nut with the same durability as our standard stainless steel center nuts Unique de...
More Details
Schmitt Marine Faux Center Nut Black w/1/2" & 5/8" M12 Base f/Cast Steering Wheels
Steering Wheels, Schmitt Marine
$44.84
Faux Center Nut Black with 1/2" & 5/8" M12 Base for Cast Steering Wheels Replacement center cap for Cast Steering Wheels Product Specifications Dimensions2" L × 2" W × 2" HShipping Weight0.2 lbCountry...
More Details
Schmitt Marine Folletto 14.2" Wheel - Black Polished Polyurethane - 3/4" Tapered Shaft w/Black Center Cap
Steering Wheels, Schmitt Marine
$319.79
Folletto 14.2" Wheel - Black Polished Polyurethane - 3/4" Tapered Shaft - Black Center Cap The Folletto Wheel is a black polished polyurethane steering wheel. Best suited for ski boats, wakeboard boat...
More Details
Schmitt Marine Folletto 14.2" Wheel - Black Polyurethane - 3/4" Tapered Shaft w/Black Center Cap
Steering Wheels, Schmitt Marine
$284.12
Folletto 14.2" Wheel - Black Polyurethane - 3/4" Tapered Shaft - Black Center Cap This Folletto Wheel is a black polyurethane steering wheel. Best suited for ski boats, wakeboard boats, runabouts, or ...
More Details
Schmitt Marine Primus Model 740 - 13.5" Wheel w/Knob & Finger Grip - 3/4" Tapered Shaft w/Faux Nut - 1/2" & 3/4" Adapters
Steering Wheels, Schmitt Marine
$1,199.77
Primus Model 740 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" Adapters The Primus Wheel is a 3 spoke stainless steel steering wheel that can be a great additi...
More Details
Schmitt Marine Primus Wheel 13.5" Black 3/4" Tapered Shaft w/Knob Finger Grips - Black Powder Coat
Steering Wheels, Schmitt Marine
$1,263.36
Primus Wheel 13.5" Black 3/4" Tapered Shaft with Knob Finger Grips - Black Powder Coat Few components on a boat are touched as frequently as its steering wheel. That’s why Schmitt Marine designed Prim...
More Details
Schmitt Marine PU30 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$472.07
PU30 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered Shaft This particular model of the PU30 Wheel is a black polyurethane steering wheel with black spokes. Best suited for ski bo...
More Details
Schmitt Marine PU50 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$361.10
PU50 14" Wheel - Chrome Cap & Spoke Inserts - Black Spokes - 3/4" Tapered Shaft This particular model of the PU50 Wheel is a black polyurethane steering wheel with black spokes. Best suited for ski bo...
More Details
Schmitt Marine Torcello 14" Wheel - 03 Series - Polyurethane Wheel w/Chrome Spoke Inserts & Cap - Black Brushed Spokes - 3/4" - Retail Packaging
Steering Wheels, Schmitt Marine
$343.48
Torcello 14" Wheel - 03 Series - Polyurethane Wheel with Chrome Spoke Inserts & Cap - Black Brushed Spokes - 3/4" - Retail Packaging The 03 Series Torcello Wheel is a black polyurethane steering wheel...
More Details
Schmitt Marine Torcello 14" Wheel - 03 Series - Polyurethane Wheel w/Chrome Trim & Cap - Brushed Spokes - 3/4" Tapered Shaft - Retail Packaging
Steering Wheels, Schmitt Marine
$384.51
Torcello 14" Wheel - 03 Series - Polyurethane Wheel with Chrome Trim & Cap - Brushed Spokes - 3/4" Tapered Shaft - Retail Packaging The 03 Series Torcello Wheel is a black polyurethane steering wheel ...
More Details
Schmitt Marine Torcello 14" Wheel - 04 Series - Polyurethane Wheel w/Chrome Trim & Cap - Brushed Spokes - 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$396.63
Torcello 14" Wheel - 04 Series - Polyurethane Wheel with Chrome Trim & Cap - Brushed Spokes - 3/4" Tapered Shaft The 04 Series Torcello Wheel is a black polyurethane steering wheel with brushed spokes...
More Details
Schmitt Marine Torcello Elite 14" Wheel - Beige Leather & Cap - White Stitching - Black SS Spokes - 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$1,324.70
Torcello Elite 14" Wheel - Beige Leather & Cap - White Stitching - Black SS Spokes - 3/4" Tapered Shaft Few things on a boat have the power to convey a sense of luxury as much as the steering wheel. T...
More Details
Schmitt Marine Torcello Elite 14" Wheel - Black Leather & Cap - White Stitching - Polished SS Spokes - 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$1,324.70
Torcello Elite 14" Wheel - Black Leather & Cap - White Stitching - Polished SS Spokes - 3/4" Tapered Shaft Few things on a boat have the power to convey a sense of luxury as much as the steering wheel...
More Details
Schmitt Marine Torcello Lite 13" Wheel - Black Polyurethane Wheel w/Silver Spokes & Black Cap- 3/4" Tapered Shaft
Steering Wheels, Schmitt Marine
$206.00
Torcello Lite 13" Wheel - Black Polyurethane Wheel With Silver Spokes & Black Cap- 3/4" Tapered Shaft The Torcello Lite Wheel is a black polished polyurethane steering wheel with silver spokes. Best s...
More Details
Schmitt Marine Vision Elite Stainless Steel 15.5" Steering Wheel
Steering Wheels, Schmitt Marine
$569.78
Vision Elite Stainless Steel 15.5" Steering Wheel Vision is the industry standard saltwater cast wheel. Features: Stainless steel construction with stainless steel 316 castings Available with or with...
More Details
Schmitt Marine Vision FX Model 714 - 13.5" Wheel w/Knob & Finger Grip - 3/4" Tapered Shaft w/Faux Nut - 1/2" & 3/4" Adapters
Steering Wheels, Schmitt Marine
$455.57
Vision FX Model 714 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" Adapters The Vision FX Wheel is a 3 spoke stainless steel steering wheel that can be a great ...
More Details
Primus 15.5″ Stainless Steel Steering Wheel Polished 316L SS Cast Steering Wheel with Santoprene™ finger grip, rim grip, and solid spoke, 3/4″ tapered shaft, and comfortable stainless steel glass ball...
More Details
TR10 with Safety Pin - 1" Shackle Features: Perpendicular or parallel release directions Hitch pin lock for device locking safety Computer-generated parts precision-cut from aerospace grade stainless ...
More Details
TR3 Spring Loaded Safety Pin - 1/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effor...
More Details
TR3 with Safety Pin - 1/4" Shackle Features: Perpendicular or parallel release directions Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless...
More Details
Safety Pin for TR5 - 7/16" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard...
More Details
TR5 w/Safety Pin - 7/16" Shackle Features: Perpendicular or parallel release directions Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless s...
More Details
TR5LM with Safety Pin - Large Mouth (1.130" mouth diameter) The LM models (LM = Large Mouth) are provided with a front jaw enlarged to receive straps, cable or fiber line. Additional side plates at th...
More Details
Safety Pin for TR7 - 5/8" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard...
More Details
TR7 with D-Shackle Safety Pin - 5/8" Shackle Features: Perpendicular or parallel release directions Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade...
More Details
TR7LM with Safety Pin - Large Mouth (1.6" mouth diameter) The LM models (LM = Large Mouth) are provided with a front jaw enlarged to receive straps, cable or fiber line. Additional side plates at the ...
More Details
TR8 Spring Loaded Safety Pin - 3/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effor...
More Details
TR8 with D-Shackle Safety Pin - 3/4" Shackle Features: Perpendicular or parallel release directions Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade...
More Details
Bow Eye - 1/2" - Machined 304 Stainless Steel These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 st...
More Details
Sea Dog Stainless Steel Stud Mount Flanged Hand Rail w/Mounting Flange - 12"
Grab Handles, Sea-Dog
$75.36
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not include...
More Details
Sea Dog Stainless Steel Stud Mount Flanged Hand Rail w/Mounting Flange - 24"
Grab Handles, Sea-Dog
$106.53
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 24" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not include...
More Details
5" Oval Stainless Steel Folding Cleat This oval folding cleat incorporates a positive locking feature with an audible click into the open/closed positions for easy rigging. Features: Accommodates up t...
More Details
5" Oval Stainless Steel Folding Cleat with Hidden Hex Bolts This oval folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making bolt ...
More Details
5" Rectangle Stainless Steel Folding Cleat with Hex Bolts This rectangular folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making ...
More Details
6" Rectangle Stainless Steel Folding Cleat with Hex Bolts This rectangular folding cleat with hidden hex bolts features an innovative design incorporating removable hex bolts vs. welded studs, making ...
More Details
90° Gas Lift Mount - Narrow 90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball. W...
More Details
90° Gas Lift Mount - Wide 90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball. WAR...
More Details
Anti-Rattle Latch - Sand-Cast Chrome-Plated Brass Anti-Rattle Latch features an open-mount, center-tensioning cam latch for a tight, no-rattle seal. Latch also features a locking hole that will accept...
More Details
Barrel Bolt - Chrome Finish - 1-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal f...
More Details
Barrel Bolt - Chrome Finish - 2-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal f...
More Details
Barrel Bolt - Chrome Finish - 2-7/8" Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system...
More Details
Barrel Bolt - Chrome Finish - 2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for u...
More Details
Barrel Bolt - Chrome Finish - 3" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for u...
More Details
Sea-Dog Bimini Strap - Nylon Webbing/Stainless Steel - 8"
Accessories, Bimini Top Fittings, Sea-Dog
$23.34
Bimini Strap - Nylon Webbing/Stainless Steel - 8" Nylon Bimini Straps are used to replace lost or damaged Bimini top straps. Constructed of 1” wide nylon webbing with corrosion-resistant stainless ste...
More Details
Bow Eye - 3/8" - Machined 304 Stainless Steel These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 st...
More Details
Bow Eye - Machined 304 Stainless Steel These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless...
More Details
Bow Eye - Machined 304 Stainless Steel - 3/8" x 3-1/2" These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machin...
More Details
Bow Eye - Machined 304 Stainless Steel - 7/16" x 3-1/2" These Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machi...
More Details
Sea-Dog Bow Shackle - 7/8" Diameter, 1" Opening, 316 Cast Stainless Steel
Accessories, Sea-Dog
$26.44
Bow Shackle - Investment Cast 316 Stainless Steel Body With their rounded shape, Bow Shackles are designed for many different applications. Features a screw pin closure for quick removal, making them ...
More Details
Butt Hinge - Stamped 304 Stainless Steel - 2" These Butt Hinges consist of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Designed to be mortised in for a flush i...
More Details
Cam Lock This cylindrical locking assembly features a pivot mechanism that will swivel to engage in a locked or open position merely by turning the cam assembly. Die cast zinc lock installs with back...
More Details
Cast Stainless Steel Handle/Latch - 3-3/4" x 3" The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors,...
More Details
Cupboard Bolt Surface mounted to the front of a cupboard door, these Cupboard Bolts are used to secure cabinet doors while underway. Corrosion resistant chrome plated extruded brass construction. Ins...
More Details
Deck Plate Lanyard - 12" This Deck Plate Lanyard is designed to retain deck plate lids. Fits all Sea-Dog® Deck Plates. Constructed of corrosion resistant 304 stainless steel. Attaches to lid with #6 R...
More Details
Door Button - Chrome Plated Brass These Door Buttons are a sleek, simple, and effective hardware solution to keep doors closed. Spring-loaded design keeps the door in place. Constructed of cast brass ...
More Details
Door Catch Constructed of sturdy injection molded nylon. These Door Catches provide secure closure for cabinet doors. Installs with four #6 RH fasteners (not included). WARNING: This product can exp...
More Details
Door Hinge - 1-1/2" x 3" - Investment Cast 316 Stainless Steel These Door Hinges are constructed of corrosion-resistant investment-cast 316 stainless steel. Installs with six #10 FH fasteners (not inc...
More Details
Door Hinge - 2-3/4" - Stamped 304 Stainless Steel These Door Hinges are constructed of corrosion-resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 F...
More Details
Door Stop & Catch - Brass - 2" The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch all...
More Details
Door Stop & Catch - Chrome - 2" The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch al...
More Details
Door Stop & Catch - Investment Cast 316 Stainless Steel These Door Stops and Catches hold the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spri...
More Details
Double Coat Hook - Cast Brass Double Coat Hooks create a securing point for storing gear instantly. Constructed of sand-cast brass. Installs with two #6 FH fasteners (not included). Available in polis...
More Details
Elbow Catch This spring-loaded injection molded nylon Elbow Catch is ideal for the inactive side of a pair of cabinet doors. For use on wood or metal doors where no frame is present between doors. Su...
More Details
Fender Hook This fender hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" line Features: The spring-loaded hook keeps the line c...
More Details
Flexible Door Catch Constructed of sturdy UV-resistant injection-molded nylon with a stainless steel spring clip. These Flexible Door Catches guarantee ease of alignment and durability in use. Includ...
More Details
Flush Gas Lift Mount Flush Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with three #10 RH fasteners (not included). 10 mm ball. ...
More Details
Flush Hatch Pull Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open h...
More Details
Folding Ladder - 3 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, rail...
More Details
Folding Ladder - 4 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, rail...
More Details
Folding Ladder - 5 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, rail...
More Details
Folding Step - Formed 304 Stainless Steel The ultimate step at a very competitive price! This Folding Step can be locked in a rattle-free, upright position when not in use. The unique design features ...
More Details
Gas Filled Lift Spring - 10" - 20# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 10" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 10" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 15" - 20# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 15" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 15" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 15" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 17" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 17" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 17" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 120# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on...
More Details
Gas Filled Lift Spring - 20" - 20# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 30# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 60# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 80# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 20" - 90# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on ...
More Details
Gas Filled Lift Spring - 7-1/2" - 20# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count ...
More Details
Gas Filled Lift Spring - 7-1/2" - 40# Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count ...
More Details
Sea-Dog Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72"
Fuel Tanks, Accessories, Sea-Dog
$25.31
Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72" This Gas Tank Strap is for use in securing a portable gas tank. Includes: 1” x 6’ webbing strap with buckle, two footman's loops, and four #10 ...
More Details
Gas Tank Vent - Die Cast Zinc Chrom Plated These gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to...
More Details
Gate Latch Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Install...
More Details
Hand Rail Tee 316 Stainless Steel 90° - 7/8" These Hand Rail Tee fittings create directionality in hand rail applications. Includes set screws where appropriate. Set screws can be purchased separately...
More Details
Sea-Dog Handrail Tees - 90 Degree - 1" - Investment Cast 316 Stainless Steel
Rail Fittings, Sea-Dog
$40.26
Handrail Tees - 90 Degree - 1" - Investment Cast 316 Stainless Steel These Handrail Tee fittings create directionality in handrail applications. Includes set screws where appropriate. Set screws can b...
More Details
Hatch Adjuster - 11" Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple thumb screw ...
More Details
