Select Category
_0x200.jpg)
Attwood Suzuki 3/8" Barb Female Hose Fitting - Under 75HP
Attwood SWIVL-EZE LakeSport 2-3/8" Seat Mount w/Friction Control - Aluminum
Attwood SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate Threaded
Attwood Thru Hull Connector For Hose, White - 1-1/2" - 721415 - 23-38753F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/8" To 1-1/4" - 721050 - 23-38743F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 720685 - 23-38733F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 729086 - 23-38963F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 5/8" - 720320 - 23-38723F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White, 90 Degree - 3/4" - 722146 - 23-38773F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Scupper For Hose, White - 1-1/2" - 723548 - 23-38811F1
The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and closes to help prevent backwash from entering cockpit. Installation hole size is 2".
Attwood Thru Hull Stainless Steel 1-1/2" For Hose - 66551-3 - 23-665513F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose, Short - 66545-3 - 23-665453F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose - 66550-3 - 23-665503F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose, Short - 66544-3 - 23-665443F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose - 66549-3 - 23-665493F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose, Short - 66543-3 - 23-665433F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose - 66548-3 - 23-665483F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose, Short - 66542-3 - 23-665423F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose - 66547-3 - 23-665473F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose, Short - 66541-3 - 23-665413F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 5/8" For Hose - 66546-3 - 23-665463F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 5/8" For Hose, Short - 66540-3 - 23-665403F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Toggle On/Off Switch, Metal Handle - 14253-3 - 23-142533F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Toggle On/Off/On Switch, Metal Handle - 14255-3 - 23-142553F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Trailer Guide Lights (Sold As Pair) - 14066-7 - 23-140667F1
Trailer guide lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. NOTE: Mounting hardware not included.
Attwood Trailer Tongue Lift Handle - 11130-7 - 23-111307F1
Convenient handle for maneuvering trailer tongue. Mounts easily to most trailer couplers.
Attwood Transducer Mounting Plate And Hardware - 94110-5 - 23-941105F1
For easy mounting, addition and replacement of transducers Marine grade polymer will not warp, corrode or be affected by UV raysMounts easily with two screws
Attwood Transom Saver Adjustable 23-35" - 400-B - 148-400Bf1
Deluxe head with composite padsBolt or roller mounting bracketSupports weight of the motorStabilizes both your engine and steering mechanism during trailering
Attwood Transom Saver Adjustable 23" To 35" Roller Mount - 400-R - 148-400Rf1
Deluxe head with composite padsBolt or roller mounting bracketSupports weight of the motorStabilizes both your engine and steering mechanism during trailering
Attwood Transom Saver Heavy Duty Adjustable 32-42" - 424-Adj - 148-424Adjf1
Protects transoms by stabilizing engine and steering mechanism while traileringSupports the cantilevered weight of the motorAdjustable toggles with replaceable rubber pads
Attwood Tsunami MK2 T500 Manual Bilge Pump w/Installation Kit - 500 GPH & 12V
Attwood Turbo 3000 Series Water-Resitant, In-Line Blower - 12V - White
Attwood Turbo 4000 Series II Water-Resistant, In-Line Blower - 12V - White
Attwood Twist On Hose Flange For 3" Hose, Black - 1405-3 - 23-14053F1
For 3" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed.
Attwood Universal 90 Degree Elbow - 1/4" NPT x 1/4" NPTF - Brass
Attwood Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb
Attwood Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb
Attwood Universal Brass Fuel Hose Fitting - 1/4" NPT x 5/16" Barb
Attwood Universal Fuel Connector 90 Degree Male Elbow 1/4" Npt - 2552103 - 23-88876F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads.
Attwood Universal Fuel Line Kit - 3/8" Dia. x 12' Length w/Sprayless Connectors
Attwood Universal Fuel Line Kit - 3/8" Dia. x 12' Length w/Sprayless Connectors & Fuel Demand Valve
Attwood Universal Fuel Line Kit - 3/8" Dia. x 6' Length w/Fuel Demand Valve
Attwood Universal Fuel Line Kit - 3/8" Dia. x 6' Length w/Sprayless Connectors
Attwood Universal Fuel Line Kit - 3/8" Dia. x 6' Length w/Sprayless Connectors & Fuel Demand Valve
Attwood Universal Fuel Line Kit - 3/8" Diameter x 12' Length
Attwood Universal Fuel Line Kit - 3/8" Diameter x 6' Length
Attwood Universal Fuel Line Kit - 5/16" Diameter x 6' Length
Attwood Universal Pontoon Replacement Gate Latch, White - 11404-6 - 23-114046F1
This durable lock set is a complete replacement kit for your pontoon's gate latch. Universal sizing fits square frames of 1", 1-1/8", and 1-1/4" on both left- and right-hinged gates. Secure closure stabilizes gate and prevents inward swinging. Includes mounting hardware for quick and easy installation.
Attwood Universal Sprayless Connector - Hose Female (5/16"-3/8")
Attwood Universal Sprayless Connector - Tank Male (1/4" NPT w/Thread Sealant)
Attwood Universal Sprayless Connector – Hose Male (5/16"-3/8")
Attwood Vent-Venturi Black - 1494A5 - 23-1494A5F1
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on highly contoured decks. Dimensions: 17-9/16" L x 2-3/4" H x 11/16" D
Attwood Wedge 2" Fixed Post 11" - Sp-28911 - 148-Sp28911F1
Satin anodized finish. Not recommended for use with other manufacturers' products.
Attwood Wedge 2" Fixed Post 13" - Sp-28913 - 148-Sp28913F1
Satin anodized finish. Not recommended for use with other manufacturers' products.
Attwood Wedge Base Plate 9" - Sp-68914 - 148-Sp68914F1
Brushed aluminum Required mounting hole: 3.25"Fits 2" & 2-3/8" posts
