Select Category
_0x200.jpg)
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26393 - 241-26393F1
Commercial Grade w/7" radius for 14" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 20" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26394 - 241-26394F1
Commercial Grade w/6" radius for12 Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 18" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26429 - 241-26429F1
Commercial Grade w/4" radius for 8" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 14" x 3".
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26408 - 241-26408F1
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26427 - 241-26427F1
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26532 - 241-26532F1
Standard Grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26523 - 241-26523F1
Standard grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26400 - 241-26400F1
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26521 - 241-26521F1
Standard grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 25491 - 241-25491F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26418 - 241-26418F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26522 - 241-26522F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 24280 - 241-24280F1
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 26411 - 241-26411F1
Commercial grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Piling Hoop And Roller Assembly, Commercial Grade - 26415 - 241-26415F1
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter.
Tie Down Engineering Dock Hardware - Steel Chain Pile Holder, Commercial Grade - 26419 - 241-26419F1
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters. Size: 20-1/4" x 4-1/4" x 4-1/4" x 1/4" Steel.
Tie Down Engineering Dock Hardware - Washer Plate - 24284 - 241-24284F1
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Washer Plate - 26409 - 241-26409F1
Commercial grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Side Cross Beam Extension - 86916 - 241-86916F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Cross Beam Extension - 86934 - 241-86934F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Mounting Base - Magma Grill Kettle - 86913 - 241-86913F1
This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.
Tie Down Engineering Dock Side Slotted Receiver With Cross Beam - 86901 - 241-86901F1
The Slotted Style Receiver with the cross beam mounting bracket provides a secure mounting solution for solid side rail docks.The assembly mounts on the side rails of solid rail style docks and is secured to the side rails with two bolts on each side. Includes one slotted receiver with cross beam.
Tie Down Engineering Fluted Zinc Plated Shackle Bolts With Nuts For Use With Spring Hanger Brackets (2 Per Pack) - 86250 - 241-86250F1
For use with spring hanger brackets. Fluting prevents the bolt from turning, which can wear hanger brackets. Grade 5 steel. 9/16" x 3" bolts with nuts.
Tie Down Engineering Front Spring Hanger - 86274 - 241-86274F1
Solid steel hangers that can be used on slipper and double eye springs that are mounted on 1,000-3,500 lb. capacity, medium-duty axles. Pre-drilled for 9/16" bolt.
Tie Down Engineering Galvanized Dock Ladder - 28273 - 241-28273F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28274 - 241-28274F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28275 - 241-28275F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86117 - 241-86117F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86118 - 241-86118F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86145 - 241-86145F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86157 - 241-86157F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86184 - 241-86184F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86185 - 241-86185F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86186 - 241-86186F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86187 - 241-86187F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86188 - 241-86188F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86189 - 241-86189F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59379 - 241-59379F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59380 - 241-59380F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59385 - 241-59385F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59390 - 241-59390F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59395 - 241-59395F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59400 - 241-59400F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel Panel Bracket - 86150 - 241-86150F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 4-3/8" W. Roller size is 4".
Tie Down Engineering Galvanized Steel Panel Bracket - 86151 - 241-86151F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 5-3/8" W. Roller size is 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86152 - 241-86152F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". BRacket is 8-3/8" W. Roller size is 6".
Tie Down Engineering Galvanized Steel Panel Bracket - 86153 - 241-86153F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 12-3/8" W. Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket - 86155 - 241-86155F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 10-3/8" W. Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86279 - 241-86279F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8". Roller size 5".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86280 - 241-86280F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket is 8-3/8". Roller size is 8".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86281 - 241-86281F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8". Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86282 - 241-86282F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8". Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86414 - 241-86414F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86415 - 241-86415F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86416 - 241-86416F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86417 - 241-86417F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86430 - 241-86430F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86431 - 241-86431F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86432 - 241-86432F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86433 - 241-86433F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized U-Bolt Kit - 86220 - 241-86220F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86221 - 241-86221F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86222 - 241-86222F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86223 - 241-86223F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86224 - 241-86224F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86225 - 241-86225F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86226 - 241-86226F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86227 - 241-86227F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86102 - 241-86102F1
Mount these 13" rubber rollers on top or beneath frame for added adjustment. Hot dip galvanized mounts adjust for widths to 13" on each side. Fits frame up to 4". Hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86103 - 241-86103F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86104 - 241-86104F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. Shock dampener and wedge dampener can be configured for 0, 7 or 14 degree hull angles. All hardware included. Universal fit for 3" & 4" trailer frame size. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86105 - 241-86105F1
Adapts to all tube and channel trailer frames. Hot dip galvanized for lasting protection. Heavy duty steel component parts. Heavy duty 4' x 2-3/8" PVC guide tubes, 16" of adjustment. All hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86106 - 241-86106F1
Roller angle adjusts to angle of hull; 16" of adjustment (8" each side). Hot dip galvanized steel. One piece adjustable clamp with U-bolt. Fits all channel and tube frames up to 5". Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86119 - 241-86119F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86148 - 241-86148F1
Soft poly vinyl cradles your boat protecting it from scratches and dings. All hardware included. Universal fit for 3" and 4" trailer frame sizes. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86200 - 241-86200F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86201 - 241-86201F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86440 - 241-86440F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86441 - 241-86441F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86465 - 241-86465F1
Bright orange end caps on these PVC guides gives a brighter target when loading a pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel tubing and covered by 2"x 20" PVC pipe. Galvanized guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86466 - 241-86466F1
Ideal for jon boats, bass boats and personal watercraft. The guide posts are made of 1-1/2" square, 16-gauge steel tubing and galvanized for long life. Guide covers are made from high impact non-marking molded PVC. Low Rider Guide On's give you the extra advantage of high strength and great looks for your trailer. Mounts to trailer cross members 2"x 2", 2"x 3" and 2"x 4" frames. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86467 - 241-86467F1
Ideal for larger pontoon boats. These guides are designed for rough water loading where high impact guides are required. The guide posts are hot dip galvanized for long life with covers made from high impact non-marking molded PVC. The guide posts are designed to be mounted between the pontoons. Made of 2-1/2" square, 13-gauge steel tubing. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86468 - 241-86468F1
When the trailer is submerged, the PVC guide rises upward adding an additional 12" in sight with adjustable viewing sight of 24"- 36" overall height. Bright orange end caps on these PVC guides give you a brighter target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel galvanized tubing and covered by 2"x 20" PVC pipe. Guide posts extend fully into the PVC tube for additional strength. All mounting hardware included.
Tie Down Engineering Hot Dip Galvanized Split Panel Brackets - Sold As Pair (L & R) - 81235 - 241-81235F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Tie Down Engineering Hot Dipped Galvanized Keel Roller Assembly With 4" Rubber Roller - 86121 - 241-86121F1
Adjustable offset brackets mount on tongue for keel support. Complete with 4" rubber roller (for 2" wide tongue).
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81225 - 241-81225F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81230 - 241-81230F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 86149 - 241-86149F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86476 - 241-86476F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 2" x 2" x 1/2" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86478 - 241-86478F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 2-1/2" x 1-1/2" x 5/8" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86480 - 241-86480F1
Black Spool Rubber Roller. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86481 - 241-86481F1
Black Spool Rubber Roller. Size 5" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86482 - 241-86482F1
Black Spool Rubber Roller. Size 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86483 - 241-86483F1
5" Black Rubber Center Guide Keel Roller with 5/8" Hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86484 - 241-86484F1
8" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86485 - 241-86485F1
10" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86486 - 241-86486F1
12" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86487 - 241-86487F1
3" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86488 - 241-86488F1
4" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86489 - 241-86489F1
Rubber "V" Bow Stop, 2" with 3/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86490 - 241-86490F1
Rubber "V" Bow Stop, 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86491 - 241-86491F1
Rubber "V" Bow Stop, 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86492 - 241-86492F1
Rubber Wobble Roller, 4" Smooth with 3/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86493 - 241-86493F1
Rubber Wobble Roller, 4" Ribbed with 3/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86494 - 241-86494F1
Rubber Wobble Roller, 5" Ribbed with 1-1/4" hole.
Tie Down Engineering Hull Sav'R Black Rubber Side Guide Roller - 86475 - 241-86475F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 9" x 2" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Side Guide Roller - 86477 - 241-86477F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 12" x 2-1/2" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Spool Rubber Roller. Size 4" With 1/2" Hole. - 86479 - 241-86479F1
Black Spool Rubber Roller. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86400 - 241-86400F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black bow roller is 4".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86401 - 241-86401F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 4".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86402 - 241-86402F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86403 - 241-86403F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86404 - 241-86404F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size 4".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86405 - 241-86405F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Black. Size: 3".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86406 - 241-86406F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 4" spool with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86407 - 241-86407F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 5" Keel for 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86408 - 241-86408F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 5" Spool with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86409 - 241-86409F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 8" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86410 - 241-86410F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 10" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86411 - 241-86411F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 12" Keel with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86412 - 241-86412F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. 3.5" End cap with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86413 - 241-86413F1
Poly vinyl. Will not mar or mark the boat. 3" Black roller with 1/2" shaft.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86419 - 241-86419F1
Ribbed. Includes 7/8" and 1.15" bushings, hog ring and washers. Size: 5".
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86420 - 241-86420F1
Feature new poly vinyl amber or black rollers that are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 2" with 3/8" shaft.
Tie Down Engineering Hull Sav'R Poly Vinly Black Roller - 86421 - 241-86421F1
Poly vinyl. Will not mar or mark the boat. Size 4" with a 1/2" shaft.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86142 - 241-86142F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86143 - 241-86143F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86144 - 241-86144F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat.Kit includes: (4) Ribbed rollers, 7/8" & 1.15" bushings and galvanized hog rings & washers. Size: 5" with 3" dia.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86158 - 241-86158F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 5" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86159 - 241-86159F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 8" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86169 - 241-86169F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 10" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86198 - 241-86198F1
Amber poly vinyl that is long lasting, will absorb shock, is cut resistant and will not mark or mar your boat. Size 3-1/2" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86199 - 241-86199F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. 12" Amber center guide roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86283 - 241-86283F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size: 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86284 - 241-86284F1
Poly vinyl amber rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86285 - 241-86285F1
Feature new poly vinyl amber or black rollers that are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86287 - 241-86287F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86288 - 241-86288F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 4" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86289 - 241-86289F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Poly Vinyl Amber Roller - 86290 - 241-86290F1
Poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark or mar your boat. Size 3" with 1/2" hole.
Tie Down Engineering Modular Bunk Glide On'S - Black - 86295 - 241-86295F1
Self centering bunk glide on's with interlocking modular sections. Designed to fit various bunk board lengths. Ideal for painted, fiberglass, or aluminum boats. Fits 2" x 6" x 8' standard bunk boards. Kit includes 4 ea. - 3' sections, 4 ea. - 1' end sections and mounting hardware. Slide on or off with less effort. Easy to Install.
Tie Down Engineering Pal Nuts - 4 Per Pack - 86305 - 241-86305F1
Zinc plated steel. Size: 1/2".
Tie Down Engineering Pal Nuts - 4 Per Pack - 86310 - 241-86310F1
Zinc plated steel. Size: 5/8".
Tie Down Engineering Poly Vinyl Bunk Glide On Fits 2" X 4" Standard 8' Bunk Boards - 86162 - 241-86162F1
Self centering bunk glide on's made with Tie Down's enhanced PVC. Launch and load made easy. Ideal for painted, fiberglass, or aluminum boats. Slide on or off with less effort. Easy to install. Includes 2 left and 2 right self centering glide-ons with rounded end caps to fit two 2" x 4" x 8' bunk boards. Includes stainless screws.
Tie Down Engineering Quik-Set Hooker Anchor - 95006 - 241-95006F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 5HQ with 120 lbs. holding strenth.
Tie Down Engineering Quik-Set Hooker Anchor - 95011 - 241-95011F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish.Model 7HQ with 150 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95016 - 241-95016F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 10HQ with 160 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95021 - 241-95021F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 13 HQ with 180 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95026 - 241-95026F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 15HQ with 200 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95090 - 241-95090F1
This innovative anchor replaces the Economy anchor line with a fresh design and increased performance. The Hooker Quik-Set has 50% more holding power and the appearance of an anchor costing much more. The Hooker Quik-Set design with the "Slip Lock" shank insures a proper set regardless of which way the anchor lands. A slip ring design permits easy retrieval in snag prone areas. Hot dipped galvanized finish. Includes Quick Set anchor, rope, galvanized chain and shackles. 5 lb. Hooker 10HQ Quik Set for 20'-24' boats.
Tie Down Engineering Rear Spring Hanger - 86275 - 241-86275F1
Solid steel hangers that can be used on rear slipper springs 1-3/4" to 2" wide. 5,200-8,000 lb. capacity for medium-duty axles. 1/4" Stock.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81202 - 241-81202F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81203 - 241-81203F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks - Sold As Pair - 81204 - 241-81204F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Safety Chain With S-Hooks On Both Ends - 81205 - 241-81205F1
Zinc plated trailer chains with S-hooks.
Tie Down Engineering Speed Release For Dock Ladder - 27271 - 241-27271F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water. 250 lb. capacity.
Tie Down Engineering Super Hooker Anchor - 95030 - 241-95030F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #2-1/2 with 130 Ibs. holding stregth.
Tie Down Engineering Super Hooker Anchor - 95035 - 241-95035F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #4 with 250 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95040 - 241-95040F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #8 with 480 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95045 - 241-95045F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #13 with 740 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95050 - 241-95050F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #18 with 1050 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor - 95055 - 241-95055F1
A good choice for your anchoring needs. Super Hooker anchors are well made, strong and have a hot dipped galvanized finish. Model #22 with 1300 Ibs. holding strength.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95095 - 241-95095F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 8 lb. Super Hooker for 17'-24' boats.
Tie Down Engineering Super Hooker Anchor Kit Includes Anchor, Anchor Line, Chain And (2) Shackles - 95100 - 241-95100F1
The Super Hooker anchor is a good choice for your anchoring needs. This lightweight, hot dipped galvanized Super Hooker anchor has strong, wide flukes that penetrate quickly and firmly for maximum holding power. The fully welded crown configuration provides the right angles for ultimate holding power and secure penetration. The Super Hooker stows flat and can be used with most fluke type anchor storage systems. Includes Super Hooker anchor, rope, galvanized steel chain and shackles. 13 lb. Super Hooker for 25'-30' boats.
Tie Down Engineering Tire Carrier - 86060 - 241-86060F1
Designed for use with large tube, I-beam and aluminum trailers. Heavy duty steel carrier mounts larger spare tires. Fits frames from 5" to 8" in height. Bolts can be positioned to accommodate 4, 5, 6 and 8 lug wheels.
Tie Down Engineering Tire Carrier - 86069 - 241-86069F1
Adjustable bolt circle fits both 4 lug and 5 lug wheels. Fits all trailer frames up to 6" high. Heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86079 - 241-86079F1
Made from heavy-duty steel. Carrier mounts both spare hub & spare tire designed for UHI 1750# hub with 1-1/16" and 1-3/8" bearings. Fits all trailer frames up to 3" wide and 4" high. Security holes for optional cable & lock. Includes 5 stud pre-greased hub with bearings.
Tie Down Engineering Tire Carrier - 86091 - 241-86091F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86092 - 241-86092F1
7/16" U-bolt design, accommodating 4 and 5 lug wheels. Fits 8" to 14" tires and most 15". Overall length 8-3/4" with a 3"thread length. Zinc plated. Fits all trailer frames up to 3".
Tie Down Engineering Tire Carrier - 86098 - 241-86098F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86099 - 241-86099F1
Adjusts to fit 4 and 5 lug wheels up to 15". Fits all trailer frames up to 3" wide by 4" high. Extra heavy duty welded steel construction.
Tie Down Engineering Tire Carrier - 86101 - 241-86101F1
Accommodates 4 and 5 lug wheels. Hot dip galvanized for lasting protection. Fits all trailer frames up to 3" wide by 4" high. Heavy-duty steel tubing.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50465 - 241-50465F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50470 - 241-50470F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Winch Strap With Heavy Duty Forged Latch Hook - 50475 - 241-50475F1
Easy to install and no more tangling in the drum. Each strap comes with a heavy-duty forged latch hook.
Tie Down Engineering Wobble Roller Retainer With Washer - Packed Set For 1 Roller - 86252 - 241-86252F1
Replacement washers and clip rings for "wobble" roller bunk wheels. Set for one roller.
Tie Down Engineering Zinc Plated Quick Link - 50648 - 241-50648F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Zinc Plated Quick Link - 50649 - 241-50649F1
Ideal for use with trailer chains. Zinc plated.
Tie Down Engineering Zinc Plated Roller Shaft - 86037 - 241-86037F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86038 - 241-86038F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86039 - 241-86039F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft - 86041 - 241-86041F1
Zinc plated steel.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal N Zinc - 86025 - 241-86025F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86024 - 241-86024F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86026 - 241-86026F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86027 - 241-86027F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86028 - 241-86028F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86029 - 241-86029F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86030 - 241-86030F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86031 - 241-86031F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86032 - 241-86032F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Roller Shaft With 2 Pal Nuts. - 86033 - 241-86033F1
Zinc Plated Roller Shaft With 2 Pal Nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86204 - 241-86204F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86205 - 241-86205F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86206 - 241-86206F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86207 - 241-86207F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86208 - 241-86208F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86209 - 241-86209F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86210 - 241-86210F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86211 - 241-86211F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86214 - 241-86214F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86215 - 241-86215F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86229 - 241-86229F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86230 - 241-86230F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Down Engineering Zinc Plated Square U-Bolt Kit - 86231 - 241-86231F1
ZINC PLATEDUsed for mounting brackets for trailer frame. Includes flat washers and nylon nuts.
Tie Mount Large At-5 Wht 100Pk - At-5-100 - 817-805900F1
Tie Mount Small At-3 Wht 100Pk - At-3-100 - 817-803900F1
Tie Plate 2 Sq Axle Replaces P/N 241-86538 Disc - 641-86538 - 641-86538 Superseded By: 641-K71G0169F1
Tiebar Kit, Single Cyl,End Mnt For Sale In Canada - Ho6001Em - 1-Ho6001Emf1
Tiedown 86510 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 3" - 86510 - 241-86510F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86511 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 3" - 86511 - 241-86511F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86512 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 4" - 86512 - 241-86512F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86513 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 4" - 86513 - 241-86513F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86514 Swingking™ Bolt-On Swing Tongue Kit, Hot Dipped Galvanized, 3" X 5" - 86514 - 241-86514F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tiedown 86515 Swingking™ Bolt-On Swing Tongue Kit, Black Powder Coated, 3" X 5" - 86515 - 241-86515F1
SwingKing™ bolt-on swing tongue kit converts a normal tongue into a swing tongue, perfect for those needing extra space when storing a trailer. Pivot hardware included: pull pin with lanyard, bolt, nut and washers.
Tigress 10.5" 15-Degree Swivel Rod Holder - Screwless - Stainless Steel
Tigress 1000Cs Stainless Steel Cap. - 1000Cs - 397-1000Csf1
Fits all round plastic rod holder cupholders.
Tigress 15' XD 3K Carbon Fiber Telescoping Outrigger Poles - Matte Black/ Black - Pair
Tigress 15' XD 3K Carbon Fiber Telescoping Outrigger Poles - Matte Black/Silver - Pair
Tigress 15' Telescoping Fiberglass Outrigger Poles - 1-1/8" O.D. - White/Blue - Pair
Tigress 4 Hole Extra Long Swivel Rectangular Head Rod Holder - 0° - 12-1/2"
Tigress 4 Hole Extra Long Swivel Rectangular Head Rod Holder - 15° - 12-1/2"
Tigress 66400 Straight Side Mount Rod Holder - 66400 - 397-66400F1
8-1/2" Straight Side Mount Transom Rod Or Console Rod Holder4 hole 3" x 4-1/2" brushed pad
Tigress 77275 Screwless 9" Rod Holder, 30° - 77275 - 397-77275F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 77276 Screwless 9" Rod Holder 15° - 77276 - 397-77276F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 77277 Screwless 9" Rod Holder, 0° - 77277 - 397-77277F1
Combines sleek design with high durability, ideal for serious anglers seeking a clean, seamless look. Crafted from 316 stainless steel, it resists corrosion and stands up to harsh marine environments. Designed for a 2 1/8" cutout, it requires an installation wrench for a secure, screwless fit.
Tigress 88144 Transom Mount 5-Rod Holder - 88144 - 397-88144F1
Constructed of cold drawn anodized aluminumIncludes white liners to protect your rod
Tigress 881441 Transom Mount 4-Rod Holder - 88144-1 - 397-881441F1
Constructed of cold drawn anodized aluminumIncludes white liners to protect your rod
Tigress 881491 Offset Triple Kite Rod Holder - 88149-1 - 397-881491F1
Triple offset can be used port or starboard Additional rod storage or for kite fishingConstructed of anodized aluminumTube ID 1-7/8" Base OD 1-1/2"
Tigress 881525 Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, White - 88152-5 - 397-881525F1
For 10" flared rod holders.
Tigress 881526 Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-6 - 397-881526F1
For 10" flared rod holders.
Tigress 881528 Ring Top Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-8 - 397-881528F1
Ring top liner for flared aluminum weld-on rod holders.
Tigress 881529 Ring Top Vinyl Liners For 10" Flared Aluminum Weld-On Rod Holders, Black - 88152-9 - 397-881529F1
Ring top liner for flared aluminum weld-on rod holders.
Tigress 881572 Gs Five Rod Cluster - 88157-2 - 397-881572F1
Smaller, more compact than our original Five Banger Designed to increase your rod storage capacityConstructed of cold drawn high polished anodized aluminumFits standard rod holders
Tigress 88409 Xd Rod Holder Flag Pole, 72" - 88409 - 397-88409F1
Gimbal butt makes flying in any rod holder a breeze Made of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88410 Xd Rod Holder Flag Pole, 42" - 88410 - 397-88410F1
Gimbal butt makes flying in any rod holder a breeze Gimbal butt makes flying in any rod holder a breezeMade of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88411 Xd Rod Holder Flag Pole, 54" - 88411 - 397-88411F1
Gimbal butt makes flying in any rod holder a breeze Gimbal butt makes flying in any rod holder a breezeMade of anodized aluminumEasy to storeFits standard 1-5/8" rod holder
Tigress 88414 Shore Power Cord Holder - 88414 - 397-88414F1
The Tigress Shore Power Cord Holder is perfect for holding your shore power cord or hose while cleaning boat. 15° bent buttEasily stowable, portable, and great for travelAnodized aluminumFits standard 1-5/8" rod holders
Tigress 88415 Portable Cup Holder For Rod Holder, White - 88415 - 397-88415F1
Easily adjusts for 15 and 30 degree rod holdersKeeps your drinks readily availableAdd extra drink holders in an instant
Tigress 88440 Safety Tether, Lite - 88440 - 397-88440F1
Keep valuable fishing equipment tethered to boat UV Resistant Black Vinyl CoatingSS Snaps
Tigress 884401 Safety Tether, Heavy - 88440-1 - 397-884401F1
Keep valuable fishing equipment tethered to boat Keep valuable fishing equipment tethered to boatUV Resistant Black Vinyl CoatingSS Snaps
Tigress 88443 Xd Poseidon Dredge Boom, 7' - 88443 - 397-88443F1
Allows smaller center consoles to fish like bigger boats Outpulls any other dredge on the market7' black fiberglass boom3/0 Folbe heavy-duty block pulley14' nylon safety tether with 316 stainless steel carabinerIdeal for LP or Hooker electric reels316 stainless steel hardware
Tigress 884431 Xd Poseidon Dredge Boom Kit - 88443-1 - 397-884431F1
50 yards of 400lb Momoi Outrigger Mono 500 lb stainless dredge dog swivel29 mm Harken Carbo Air Block2" spring gate snapSleeve crimps
Tigress 88502 Gunnel Mount Outrigger Holder, Cast 316 Stainless, 1-1/8" - - 397-88502F1
Gunnel mount outrigger holder.
Tigress 88522 Swivel Base Gunnel Rod Holder W/0° Oval Head, 10-1/2" L - 88522 - 397-88522F1
Gunnel mount rod holder.
Tigress 88522Sm Swivel Base Gunnel Rod Holder W/0° Rectangular Head, 10-1/2" L - 88522Sm - 397-88522Smf1
Gunnel mount rod holder.
Tigress 88524 Swivel Base Gunnel Rod Holder W/15° Oval Head, 10-1/2" L - 88524 - 397-88524F1
Gunnel mount rod holder.
Tigress 88524Sm Swivel Base Gunnel Rod Holder W/15° Rectangular Head, 10-1/2" L - 88524Sm - 397-88524Smf1
Gunnel mount rod holder.
Tigress 88525 30° Oval Head Gunnel Rod Holder - 88525 - 397-88525F1
Oval gunnel rod holder.
Tigress 885251 Medium Backing Plate - 88525-1 - 397-885251F1
For select Tigress flush mount rod holders.
Tigress 88527 0° Oval Head Gunnel Rod Holder - 88527 - 397-88527F1
Oval gunnel rod holder.
Tigress 88529 15° Oval Head Gunnel Rod Holder - 88529 - 397-88529F1
Oval gunnel rod holder.
Tigress 885303 Universal Backing Plate - 88530-3 - 397-885303F1
For select Tigress flush mount rod holders.
Tigress 88586 Weld-On Large Stainless Steel Cup Insert - 88586 - 397-88586F1
Fits 20oz and 30oz Tumblers. Designed to be welded on to aluminum towers.
Tigress 88601 Deluxe Outrigger Rigging Kit - 88601 - 397-88601F1
Pair of high impact release clips Pair of 1-1/4" cork stopsPair of glass ring snubbersPair of eye straps with screws4 leader snaps
Tigress 886081 All Purpose Kite - 88608-1 - 397-886081F1
Sturdy and dependable, the Tigress All Purpose Kite will fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds. Lightweight spars are constructed of 100% carbon graphiteIncludes extra 5th spar
Tigress 886101 Center Rigger Kit - 88610-1 - 397-886101F1
High impact release clip 1-1/4" cork stopGlass ring snubberEye strap with screws2 leader snaps30' of black nylon braid
Tigress 88645 Pro Series Halyard Lock, Single - 88645 - 397-88645F1
Locks Outrigger Line in place with no slip or creep 12" bungee with SS Snap Lock Swivel
Tigress 886451 Pro Series Single Rigging Kit - 88645-1 - 397-886451F1
Mesh Bag 50yd spool LP 400lb Blue Outrigger Mono2 1-1/4" black stops, 2 release clips2 Tigress Single Locking HalyardsCrimps and Snap Lock Swivels
Tigress 88646 Pro Series Halyard Lock, Double - 88646 - 397-88646F1
Locks Outrigger Line in place with no slip or creep 12" bungee with SS Snap Lock Swivel
Tigress 886461 Pro Series Rigging Kit, Double - 88646-1 - 397-886461F1
Mesh Bag 100yd spool LP 400lb Blue Outrigger Mono2 Tigress Double Locking Halyards2 SS Teaser Rings, Crimps, Snap Lock Swivels4 1-1/4" black stops4 release clips
Tigress 88647 Pro Series Halyard Lock, Triple - 88647 - 397-88647F1
Locks Outrigger Line in place with no slip or creep Locks Outrigger Line in place with no slip or creep12" bungee with SS Snap Lock Swivel
Tigress 886471 Pro Series Rigging Kit, Double - 88647-1 - 397-886471F1
Mesh Bag100yd spool LP 400lb Blue Outrigger Mono2 Tigress Double Locking Halyards2 SS Teaser Rings, Crimps, Snap Lock Swivels6 1-1/4" black stops6 release clips
Tigress 88656 Outrigger Release Clips, 2/Pk - 88656 - 397-88656F1
Outrigger release clips.
Tigress 88679 Xd 3K Carbon Fiber Telescoping Center Outriggers, 18' X 1-1/2", Matt Black/Black, 1 Pr. - 88679 - 397-88679F1
For use on sport fishing boats up to 40 feet Patented Tigress Track® Internal Tracking System3K carbon fiber woven finishRetracts to under 6' for trailering, bridges and storage316 Stainless Steel polished eyeletsLightest telescoping outrigger in the industryUVI thermoplastic butt sleeves to fit all Tigress top mountsIncludes a handy, heavy duty mesh storage bag1-Year limited warrantySold as a pair
Tigress 8867900 Xd Top Mount Carbon Fiber Outrigger System, 18' X 1-1/2, Black/Black - 88679-00 - 397-8867900F1
Includes:(2) XD Top Mounts(2) XD Tigress Track® telescoping outriggersUltimate rigging kitBlack mesh carry bag for storageBlack mesh carry bag for storage
Tigress 8867902 Xd Crank Top Mount Carbon Fiber Outrigger System, 18', Black/Black Tip, 1 Pr. - 88679-02 - 397-8867902F1
(2) XD Crank Top Mount(2) XD Tigress Track® Telescoping OutriggersPro Series Double Rigging Kit
Tigress 886795 Xd 3K Carbon Fiber Telescoping Center Outriggers, 8' X 1-1/8", Matt Black/Black - 88679-5 - 397-886795F1
For use on sport fishing boats up to 40 feetPatented Tigress Track® Internal Tracking System3K carbon fiber woven finishRetracts to under 6' for trailering, bridges and storage316 Stainless Steel polished eyeletsRedesigned rings and tipsLightest telescoping outrigger in the industryUVI thermoplastic butt sleeves to fit all Tigress top mountsIncludes a handy, heavy duty mesh storage bag1-Year Limited Warranty
Tigress 88690 Outrigger 1-1/4" Black Plastic Stops, 2/Pk - 88690 - 397-88690F1
Outrigger 1-1/4" Black Plastic Stops
Tigress 88691 Outrigger Line Holder, 2 Pr. - 88691 - 397-88691F1
Fits both 1-1/8" and 1-1/2" Outrigger PolesKeeps outrigger lines organized while poles are collapsedEasy clamp on installation
Tigress 888232 Xd Bay Top Mount Outrigger System, 15' X 1-1/8", Silver - 88823-2 - 397-888232F1
XD Bay Series mountXD Tigress Track® telescoping center riggerDeluxe Rigging Kit
Tigress 88824 Xd Top Mount Outrigger System, 15' X 1-1/2", Silver - 88824 - 397-88824F1
Includes:(2) XD Top Mounts(2) XD Tigress Track® telescoping outriggersPremium rigging kitBlack mesh carry bag for storageBlack mesh carry bag for storage
Tigress 888241 Xd Top Mount Outrigger System, 15' X 1-1/2", Silver - 88824-1 - 397-888241F1
Includes:(2) XD Top Mounts(2) XD Tigress Track® telescoping outriggersPremium rigging kitBlack mesh carry bag for storageBlack mesh carry bag for storage
Tigress 88825 Xd Top Mount Outrigger System, 18' X 1-1/2, Silver - 88825 - 397-88825F1
Includes:(2) XD Top Mounts(2) XD Tigress Track® telescoping outriggersUltimate rigging kitBlack mesh carry bag for storageBlack mesh carry bag for storage
Tigress 888252 Xd Crank Top Mount Outrigger System, 18', Silver, 1 Pr. - 88825-2 - 397-888252F1
(2) XD Crank Top Mount(2) XD Tigress Track® Telescoping OutriggersPro Series Double Rigging Kit
Tigress 88850 Xd Top Mount, 1 Pr. - 88850 - 397-88850F1
For use on sport fishing boats up to 40 feet Unique invertible Tigress handle design for use on both soft and hard tops over 2" thickAccepts all Tigress XD 1-1/2" butt diameter outriggers and XD 1-1/8" butts using adapterFits Tigress and other industry standard 4" x 6" mounting plates (four 5/16" diameter fasteners)Extreme-duty 316 Stainless Steel and anodized aluminum and sealed construction with UV protection24 adjustable/locking system positions (15° increments) featuring Tigress XD 316 Stainless Steel design19 upper-arm angle/locking positions (10° increments)3-Year Limited WarrantyTigress XD 316 Stainless Steel detent design with ambidextrous horizontal stopsLarge 3-lobe UV ergonomic knob with integral detent feature when changing outrigger elevationErgonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops.User friendly underside lever actuation, with 8 optional indexable set-up positionsStandard 1/4" diameter locking stainless steel push-in-pin for outriggersFits through all standard 3" diameter mounting plates and hard top holesSold as pair
Tigress 88860 Xd Center Rigger Top Mount - 88860 - 397-88860F1
For use on sport fishing boats up to 40 feet Accepts all Tigress XD 1-1/8" butt diameter center riggers19 upper-arm angle/locking (@10 deg.) using Tigress XD 316 Stainless Steel tooth locking design with horizontal stopsLarge 'XD' Aluminum 12mm thick baseplate with four corner mountingExtreme-duty 316 Stainless Steel and anodized aluminum constructionAmbidextrous mounting option to accommodate the side the tri-lobe knob is positioned on1/4" through x 4.050" x 2.625" 4-bolt patternStandard 1/4" diameter stainless steel locking push-in-pin for outriggersLarge 3-lobe UV ergonomic knob for changing and locking the outriggers elevation3-Year Limited Warranty
Tigress 88870 Xd Bay Series Top Mount, 2Ea. - 88870 - 397-88870F1
For use on sport fishing boats up to 40 feet Accepts all Tigress XD 1-1/8" butt diameter outriggers.19 upper-arm angle/locking (@10 deg.) using Tigress XD 316L Stainless Steel tooth locking design with horizontal stops for Trailering and bridges.Large 3-lobe UV ergonomic knob for changing and locking the outriggers' elevation24 adjustable/locking system positions (15 degree increments) featuring Tigress XD 316L stainless steel locking design with HD spring return.User friendly side operating lever.Large XD aluminum 14.5mm thick baseplate with four corner mounting.5/16" through x 3.000" x 5.000" 4-bolt patternFits Tigress and other industry standard 4" x 6" mounting plates (four 5/16" diameter fasteners)Extreme-duty 316L stainless steel and anodized aluminum and fully sealed construction with UV protectionAmbidextrous mounting option to accommodate the side that the tri-lobe knob is positioned on.3-Year limited warranty
Tigress 88880 Xd Crank Top Mount, 1 Pr. - 88880 - 397-88880F1
For use on sport fishing boats up to 50 feet Adjustable upper arm with Run & Laydown position stops.User friendly folding crank handle with integrated drive brake.Upper-arm adjusting ball-bearing drive system, with integrated balance spring assist.Extreme duty top plate, upper arm and housings for outriggers up to 22ft in length.Stainless steel & bronze bushed head pivot for maximum trolling strength & durability.Unique invertible Tigress handle design for use on both soft and hard tops over 2" thickAccepts all Tigress XD 1-1/2" butt diameter outriggers and XD 1-1/8" butts using adapterFits Tigress and other industry standard 4" x 6" mounting plates (four 5/16" diameter fasteners)Extreme-duty 316L stainless steel and anodized aluminum and sealed construction with UV protection24 adjustable/locking system positions featuring Tigress XD 316L stainless steel designErgonomic 316 stainless steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops.User friendly underside lever actuation, with 8 optional indexable set-up positionsFits through all standard 3" diameter mounting plates and hard top holes3-Year limited warranty
Tigress 88921 Xd Telescoping Aluminum Center Outriggers, 8' X 1-1/8", Silver - 88921 - 397-88921F1
For use on sport fishing boats up to 40 ft.Patented Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignmentLarger tube diameters and wall thicknesses for increased strength and durabilityAnodized cold draw tubes inside and out for maximum protection from corrosionRedesigned rings and tipsDouble-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less hole wallowing316 Stainless Steel polished eyelets with smooth through centersUVI marine grade thermoplastic internal bushings for trouble free sliding operationDouble 1/4" cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pinUVI thermoplastic butt sleeves to fit all top and center rigger mountsRetracts to under 5' 5" for trailering, bridges and storageIncludes a handy, heavy duty mesh storage bag3-Year Limited Warranty
Tigress 88923 Xd Telescoping Aluminum Outriggers, 15' X 1-1/8", Silver, 1 Pr. - 88923 - 397-88923F1
For use on sport fishing boats up to 40 ft. Patented Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignmentLarger tube diameters and wall thicknesses for increased strength and durabilityAnodized cold draw tubes inside and out for maximum protection from corrosionDouble-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less 'hole wallowing'Includes a handy, heavy duty mesh storage bagRedesigned rings and tips316 Stainless Steel polished eyeletsUVI marine grade thermoplastic internal bushings for trouble free sliding operationDouble 1/4" cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pinUVI thermoplastic butt sleeves to fit all 1-1/2" top and center rigger mountsRetracts to under 6' for trailering, bridges and storage3-Year Limited WarrantySold as pair
Tigress 88924 Xd Telescoping Aluminum Outriggers, 15' X 1-1/2", Silver, 1 Pr. - 88924 - 397-88924F1
For use on sport fishing boats up to 40 ft. Patented Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignmentLarger tube diameters and wall thicknesses for increased strength and durabilityAnodized cold draw tubes inside and out for maximum protection from corrosionDouble-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less 'hole wallowing'Includes a handy, heavy duty mesh storage bagRedesigned rings and tips316 Stainless Steel polished eyeletsUVI marine grade thermoplastic internal bushings for trouble free sliding operationDouble 1/4" cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pinUVI thermoplastic butt sleeves to fit all 1-1/2" top and center rigger mountsRetracts to under 6' for trailering, bridges and storage3-Year Limited WarrantySold as pair
Tigress 88925 Xd Telescoping Aluminum Outriggers, 18' X 1-1/2", Silver, 1 Pr. - 88925 - 397-88925F1
Patented Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment Larger tube diameters and wall thicknesses for increased strength and durabilityAnodized cold draw tubes inside and out for maximum protection from corrosionDouble-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less 'hole wallowing'Includes a handy, heavy duty mesh storage bagRedesigned rings and tips316 Stainless Steel polished eyeletsUVI marine grade thermoplastic internal bushings for trouble free sliding operationDouble 1/4" cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pinUVI thermoplastic butt sleeves to fit all 1-1/2" top and center rigger mountsRetracts to under 6' for trailering, bridges and storage3-Year Limited WarrantySold as pair
Tigress 9" Backing Plate f/Screwless Rod Holders - Stainless Steel
Tigress Adjustable Deep Drop Lead Holder
Tigress Black Plastic Outrigger Stops - 1-1/4" - Pair
Tigress C1000D Rod Angle Round Top, 0 Degree - C1000D - 397-C1000Df1
Self-Tapping- Used for when there is no access to the underside to attach the nuts and washers.Machine Screws- Includes nuts and washers (Must have access to underside)
Tigress C1015D Rod Angle Round Top, 15 Degree - C1015D - 397-C1015Df1
Self-Tapping- Used for when there is no access to the underside to attach the nuts and washers.Machine Screws- Includes nuts and washers (Must have access to underside)
Tigress C1030D Rod Angle Round Top, 30 Degree - C1030D - 397-C1030Df1
Self-Tapping- Used for when there is no access to the underside to attach the nuts and washers.Machine Screws- Includes nuts and washers (Must have access to underside)
Tigress Cbp Stainless Backing Plate - Cbp - 397-Cbpf1
For use with ALL Mate Series
