Select Category
_0x200.jpg)
Sea-Dog Handrail Tees - 90 Degree - 1" - Investment Cast 316 Stainless Steel
Sea-Dog Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon
Sea-Dog Illuminated Toggle Switch, On/Off - 420111-1 - 354-4201111F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminated Toggle Switch, On/Off/On - 420118-1 - 354-4201181F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminating Contura® Rocker Switch - Stamped Brass/Injection Molded Nylon/Polycarbonate
Sea-Dog Jaw & Jaw Swivel - Investment Cast 316 Stainless Steel Body w/304 Stainless Steel Pin
Sea-Dog Kill Switch 10 Key Universal Lanyard - 420496-1 - 354-4204961F1
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50" lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
Sea-Dog Kill Switch 7 Key Universal Lanyard - 420495-1 - 354-4204951F1
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50" lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
Sea-Dog LED Flex Neck Day/Night Light w/USB Socket - Red & White Light
Sea-Dog Led Flush Mount Courtesy Light, Oval, Blue Leds - 401279-1 - 354-4012791F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Led Flush Mount Courtesy Light, Round, Blue Leds - 401274-1 - 354-4012741F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog LED Low Profile Task Light w/Touch On/Off/Dimmer Switch - 304 Stainless Steel
Sea-Dog LED Overhead Light - Brushed Finish - 60 Lumens - Clear Lens - Stamped 304 Stainless Steel
Sea-Dog LED Overhead Light - Brushed Finish - 60 Lumens - Frosted Lens - Stamped 304 Stainless Steel
Sea-Dog LED Overhead Light 2-7/16" - Brushed Finish - 60 Lumens - Clear Lens - Stamped 304 Stainless Steel
Sea-Dog LED Overhead Light 2-7/16" - Brushed Finish - 60 Lumens - Frosted Lens - Stamped 304 Stainless Steel
Sea-Dog LED Push Button On/Off Switch - Formed 304 Stainless Steel
Sea-Dog LED Top Mount Side Lights - Stamped 304 Stainless Steel Housing/Investment Cast 316 Stainless Steel Base
Sea-Dog LED Tube Insert f/Existing Rod Holders 11' Long Cut To Fit Any Angle
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Line 2270301 Elbow Catch, Black, A:,1-1/8" B:1-5/16", #6 Fh - 227030-1 - 354-2270301F1
Ideal for holding inactive doors shut. Constructed of UV resistant injection molded nylon. Surface mounts with four #6 FH fasteners (not included).
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4267101 Screw Terminal Buss Bar, 5 Terminals - 426710-1 - 354-4267101F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 4267111 Screw Terminal Buss Bar, 10 Terminals - 426711-1 - 354-4267111F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
