Select Category

Cdi 9230015 Johnson/Evinrude Amphenol Receptacle, 2-Position - 923-0015 - 667-9230015F1

Connector that allows the interface between ignition components.

Cdi 9230016 Johnson/Evinrude Amphenol Receptacle, 3-Position - 923-0016 - 667-9230016F1

Connector that allows the interface between ignition components.

Cdi 9230017 Johnson/Evinrude Amphenol Receptacle, 4-Position - 923-0017 - 667-9230017F1

Connector that allows the interface between ignition components.

Cdi 9230018 Johnson/Evinrude Amphenol Receptacle, 5-Position - 923-0018 - 667-9230018F1

Connector that allows the interface between ignition components.

Cdi 9230019 Johnson/Evinrude Amphenol Receptacle, 6-Position - 923-0019 - 667-9230019F1

Connector that allows the interface between ignition components.

Cdi 9340005 Mercury Engine Harness - 934-0005 - 667-9340005F1

Visit www.cdielectronics.com for up to date application information.

Cdi Diagnostic Tool Kit - 511-9904 - 667-5119904F1

Cdi Magneto Ignition Coil - Johnson Evinrude - 183-4477 - 667-1834477 Superseded By: 47-5181F1

Johnson / Evinrude Outboard Ignition Coil that fits 1957-1990, 2 hp-6 hp engines with points and condenser ignition. See CDI catalog for complete application information.

Cdi Mercury Marine Universal B Mercury 1968-1981 Engines - 18-99400 - 47-99400F1

Cdm Module, Merc/Mariner/Force - 18-99161 - 47-99161F1

Ce Smith 5' Bunkboard Style Guide-On - 27600 - 618-27600F1

Carpeted bunkboards provide proper center loading even in wind or side current conditions.

Ce Smith Post Style Boat Guide-On, 40" - 27620 - 618-27620F1

Makes it easy to see the end of the trailer while on the road or when loading or unloading. Galvanized post extends more than half-way into each non-marring heavy-duty PVC tube for extra stability. Can be mounted on top of frame for extra height.Fits Frames up to 3" W x 4-1/4" H1-1/2" square, 16 gauge pre-galvanized steel uprights2" schedule 40 white PVC posts (2-3/8" actual OD)Mounting hardware included

Ceil Assy Delux Nonduct C/H Wt - 9430E715 - 588-9430E715F1

Ceil Assy Delux Nonduct C/H Wt W/Down Louvers - 9430E7153 - 588-9430E7153F1

Non-Ducted. Omni-directional louvers, front and rear airflow dampers, pop-out grilles for easy access to washable air filters. Electric heat strip ready. Operation & Control Knobs located for easy accessLow-Profile Euro styling provides a Contemporary lookContemporary design covers existing ceilingPop-out retainer grilles for easy, tool-free access to the washable air filters

Ceil Assy Ducted Hp Heat Ready Coleman - 8630A635 - 588-8630A635F1

Ceil Assy Ducted Merv10 Led - 8430-5602 - 588-84305602F1

Ceil Assy Heat Pump Nonducted - 9630A715 - 588-9630A715F1

Ceiling Fan-Brushed Nic/Wh 36" Brushed Nickel / White - 410Tsdc36Bnwh - 135-410Tsdc36Bnwhf1

Ceiling Fan-Brushed Nic/Wh 42" Brushed Nickel / White - 410Tsdc42Bnwh - 135-410Tsdc42Bnwhf1

Centek 110050110 Vernatube, 2-1/2" X10' - 1100501-10 - 383-110050110F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050210 Vernatube, 3" X 10' - 1100502-10 - 383-110050210F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050310 Vernatube, 3-1/2" X 10' - 1100503-10 - 383-110050310F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050410 Vernatube, 4" X 10' - 1100504-10 - 383-110050410F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050610 Vernatube, 5" X 10' - 1100506-10 - 383-110050610F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050710 Vernatube, 6" X 10' - 1100507-10 - 383-110050710F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050810 Vernatube, 8" X 10' - 1100508-10 - 383-110050810F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110050910 Vernatube, 10" X 10' - 1100509-10 - 383-110050910F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110051210 Vernatube, 2" X 10' - 1100512-10 - 383-110051210F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 11005123 Vernatube, 2" X 3' - 1100512-3 - 383-11005123F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 110052110 Vernatube, 1-1/2" X 10' - 1100521-10 - 383-110052110F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 11005255 Vernatube, 1" X 5' - 1100525-5 - 383-11005255F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 1200109 Elbow-45° 3" - 1200109 - 383-1200109F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200111 Elbow-45° 3.5" - 1200111 - 383-1200111F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200112 Elbow-45° 4" - 1200112 - 383-1200112F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200113 Elbow-45° 5" - 1200113 - 383-1200113F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200114 Elbow-45° 6" - 1200114 - 383-1200114F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200148 Reducer- Coupling-5.00" To 6.00" - 1200148 - 383-1200148F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200157 Elbow-90° 4" - 1200157 - 383-1200157F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200161 Reducer Coupling-3.00" To 3.50" - 1200161 - 383-1200161F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200162 Elbow-90° 6" - 1200162 - 383-1200162F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200170 Reducer- Coupling-4" To 3" - 1200170 - 383-1200170F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200171 Elbow-90° 3" - 1200171 - 383-1200171F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200175 Elbow-90° 5" - 1200175 - 383-1200175F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200189 Elbow-90° 3.5" - 1200189 - 383-1200189F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200192 Elbow-45° 2" - 1200192 - 383-1200192F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200195 Elbow-90° 2.5" - 1200195 - 383-1200195F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200197 Elbow-90° 8" - 1200197 - 383-1200197F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200200 Elbow-90° 2" - 1200200 - 383-1200200F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200202 Elbow-90° 1.5" - 1200202 - 383-1200202F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200215 Elbow-45° 2.5" - 1200215 - 383-1200215F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200216 Elbow-45° 8" - 1200216 - 383-1200216F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200217 Elbow-45° X 1.5" - 1200217 - 383-1200217F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200222 Reducer- Coupling-3.50" To 4.00" - 1200222 - 383-1200222F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200223 Reducer- Coupling-4.00" To 5.00" - 1200223 - 383-1200223F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200233 2" X 180° Return - 1200333 - 383-1200333F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200256 3.00 X 3.00 X 4.00 Branch Y - 1200256 - 383-1200256F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200264 Reducer Coupling-3" To 2" - 1200264 - 383-1200264F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200270 Reducer Coupling-2.50" To 3.00" - 1200270 - 383-1200270F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200304 4.00 X 4.00 X 5.00 Branch Y - 1200304 - 383-1200304F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200410 Reducer Coupling-2" To 1.5" - 1200410 - 383-1200410F1

These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable.

Centek 1200516 Vernatube, 4" X 5' - 1200516 - 383-1200516F1

It is filament wound with resin impregnated continuous rovings for optimum strength. Vernatube can be installed in either gasoline or diesel wet marine muffler systems.

Centek 1500018 Vernalift Side In/Top Out Muffler - 1500018 - 383-1500018F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek 1500020 Vernalift Side In/Top Out Muffler - 1500020 - 383-1500020F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek 1500025 Vernalift Side In/Top Out Muffler - 1500025 - 383-1500025F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek 1500026 Vernalift Side In/Top Out Muffler - 1500026 - 383-1500026F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For use above or below the waterline.

Centek 1500027 Vernalift Side In/Top Out Muffler - 1500027 - 383-1500027F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For use above or below the waterline.

Centek 1500034 Vernalift Side In/Top Out Muffler - 1500034 - 383-1500034F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek 1500071 Vernalift Side In/Top Out Muffler - 1500071 - 383-1500071F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek 1500092 Vernalift Side In/Top Out Muffler - 1500092 - 383-1500092F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For use above or below the waterline.

Centek 1500107 2.00 Vernalift 45° Deg. Angle Muffler - 1500107 - 383-1500107F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better, Use above or below the waterline.

Centek 1500232 Vernalift Side In/Top Out Muffler - 1500232 - 383-1500232F1

Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline.

Centek Flapper Repair Kit, 4" - 1200340 - 383-1200340F1

Repair kit for exhaust thru-hull.

Center Console Cover (Large) 5.3 Oz. Gray Poly-Flexii - 53014 - 500-53014F1

Center Console Cover (Small) 5.3 Oz. Gray Poly-Flexii - 53012 - 500-53012F1

Centerfielder Ii Dual Alternator Charge Balancer - Cfii-12/24 - 684-Cfii1224F1

The Centerfielder II balances twin-engine charging systems by monitoring port and starboard voltage regulators. When both alternators and voltage regulators are working, the Centerfielder II automatically splits field output from the dominant regulator to both alternators, making it possible to charge a single house battery bank with the combined output of both alternators. Use only with Max Charge MC-612, MC-614, or MC-624 voltage regulators. Do not install in systems utilizing internally regulated alternators. Balances charging in twin engine applicationsWorks in 12 and 24-volt applicationsIsolates alternators and regulators when only one engine is runningProvides field current from a single regulator to both port and starboard alternators when both engines are in operationFused 12 ga. power wires (2) w/15A ATC fuse included

Cer Coat 16 @6 - 8M0231472 - 710-92-8M0231472F1

Cetol® Iva3161Ca Marine Wood Finish, Natural Teak, Gal., 4/Case - Iva316/1Ca - 94-Iva3161Caf1

With Next Wave™ UV-absorbing technology, it offers incredible protection from damaging UV rays. it's durable, translucent and creates a rich golden color finish on interior and exterior woods above the waterline. Easy application and maintenanceNext Wave™ UV-absorbing technology offers incredible UV protectionFlexible and breathable finish

Cetol® Iva316Qtca Marine Wood Finish, Natural Teak, Qt. - Iva316/Qtca - 94-Iva316Qtcaf1

With Next Wave™ UV-absorbing technology, it offers incredible protection from damaging UV rays. it's durable, translucent and creates a rich golden color finish on interior and exterior woods above the waterline. Easy application and maintenanceNext Wave™ UV-absorbing technology offers incredible UV protectionFlexible and breathable finish

Cetol® Marine Wood Finish, Gloss Qt. - Iva315/Qt - 94-Iva315Qtf1

Cetol® Marine Gloss creates a superb high gloss hard wearing finish, that's really easy to clean and has excellent UV protection thanks to its Next Wave™ UV-absorbing technology. However, it can't be used on decks. Next Wave™ UV-absorbing technology offers incredible UV protectionA high gloss, hard wearing topcoat finishIt can't be used on decks

Cetol® Marine Wood Finish, Gloss Qt. - Iva315/Qtca - 94-Iva315Qtcaf1

Cetol® Marine Gloss creates a superb high gloss hard wearing finish, that's really easy to clean and has excellent UV protection thanks to its Next Wave™ UV-absorbing technology. However, it can't be used on decks. Next Wave™ UV-absorbing technology offers incredible UV protectionA high gloss, hard wearing topcoat finishIt can't be used on decks

Cetol® Marine Wood Finish, Light Qt. - Iva290/Qt - 94-Iva290Qtf1

Premium Synthetic Wood Coating for Low MaintenenceCetol® Marine from Sikkens with Next Wave™ advanced UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods.Cetol Marine Light with produce a lighter amber appearance on wood Creates a light amber, high gloss, hard wearing topcoat finishNext Wave™ UV-absorbing technology offers incredible UV protectionIt can't be used on decks

Cetol® Marine Wood Finish, Light Qt. - Iva290/Qtca - 94-Iva290Qtcaf1

Cetol® Marine Gloss Light creates a superb light amber, high gloss, hard wearing finish. it's really easy to clean and has excellent UV protection thanks to its Next Wave™ UV-absorbing technology. However, it can't be used on decks. Creates a light amber, high gloss, hard wearing topcoat finishNext Wave™ UV-absorbing technology offers incredible UV protectionIt can't be used on decks

Cetol® Marine Wood Finish, Natural Teak Gal. - Iva316/1 - 94-Iva316Gf1

With Next Wave™ UV-absorbing technology, it offers incredible protection from damaging UV rays. It's durable, translucent and creates a rich golden color finish on interior and exterior woods above the waterline. Easy application and maintenanceNext Wave™ UV-absorbing technology offers incredible UV protectionFlexible and breathable finish

Cetol® Marine Wood Finish, Natural Teak Qt. - Iva316/Qt - 94-Iva316Qtf1

Premium Synthetic Wood Coating for Low MaintenenceCetol® Marine from Sikkens with Next Wave™ advanced UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods.Cetol Marine Natural Teak has a rich golden color on wood Easy application and maintenanceNext Wave™ UV-absorbing technology offers incredible UV protectionFlexible and breathable finish

Cetol® Marine Wood Finish, Satin Gal. - Iva300/1 - 94-Iva300Gf1

Premium Synthetic Wood Coating for Low MaintenenceCetol® Marine from Sikkens with Next Wave™ advanced UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods.Cetol Marine produces an attractive dark amber appearance on wood Next Wave™ UV-absorbing technology offers incredible UV protectionMicroporous finish with UV protection that doesn't crack or flakeCreates an attractive dark amber appearance

Cetol® Marine Wood Finish, Satin Gal. - Iva300/1Ca - 94-Iva3001Caf1

Cetol® Marine with Next Wave UV-absorbing technology, is a protective, translucent and breathable wood finish for use above the waterline on interior and exterior woods. Next Wave™ UV-absorbing technology offers incredible UV protectionMicroporous finish with UV protection that doesn't crack or flakeCreates an attractive dark amber appearance

Cetol® Marine Wood Finish, Satin Qt. - Iva300/Qt - 94-Iva300Qtf1

Cetol® Marine with Next Wave UV-absorbing technology, is a protective, translucent and breathable wood finish for use above the waterline on interior and exterior woods. Next Wave™ UV-absorbing technology offers incredible UV protectionMicroporous finish with UV protection that doesn't crack or flakeCreates an attractive dark amber appearance

Cetol® Marine Wood Finish, Satin Qt. - Iva300/Qtca - 94-Iva300Qtcaf1

Cetol® Marine with Next Wave UV-absorbing technology, is a protective, translucent and breathable wood finish for use above the waterline on interior and exterior woods. Next Wave™ UV-absorbing technology offers incredible UV protectionMicroporous finish with UV protection that doesn't crack or flakeCreates an attractive dark amber appearance

Ch4400 Cable Hardware Kit - Ca68065P - 1-Ca68065Pf1

Hardware kit for single or dual station installations. For use w/3300/33C type cables only.

Chafing Tape - Mdr-350 - 79-Mdr350F1

Protects lines from chafing or breaking at the dock or on the boat. Heavy duty vinyl coated. Ideal for protecting dock lines, mooring lines, rigging, etc. Developed to withstand salt water. Soft and pliable. Will not crack.

Chain 1/2 X 100 Drum G30 Hot Dip Galvanized - 5610648 - 251-5610648F1

Made of low carbon steel. All grade 30 chain is proof tested. Working load limits must not be exceeded. Not to be used for lifting or hoisting applications.

Chain 1/2 X 200 Drum G30 Hot Dip Galvanized - 5610647 - 251-5610647F1

Made of low carbon steel. All grade 30 chain is proof tested. Working load limits must not be exceeded. Not to be used for lifting or hoisting applications.

Chain 1/2" X 36' Pail Iso G30 Hot Dip Galvanized - 401140801 - 251-401140801F1

Made of low carbon steel. All grade 30 chain is proof tested. Working load limits must not be exceeded. Not to be used for lifting or hoisting applications.

Chain 1/4 X 400 Drum G30 Hot Dip Galvanized - 5610248 - 251-5610248F1

Made of low carbon steel. All grade 30 chain is proof tested. Working load limits must not be exceeded. Not to be used for lifting or hoisting applications.

Chain 1/4 X 800 Drum G30 Hot Dip Galvanized - 5610247 - 251-5610247F1

Made of low carbon steel. All grade 30 chain is proof tested. Working load limits must not be exceeded. Not to be used for lifting or hoisting applications.

Chain 1/4" X 141' Pail Iso G30 Hot Dip Galvanized - 401140431 - 251-401140431F1