Select Category

Over Center Gate Hook with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fi... More Details

Over Center Snap Gate Hook for 1/8" Wire The over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger ... More Details

Pulpit Anchor for 1" Rail This fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" hole). The hole will not accept cast gate hooks.  Pro... More Details

Quick Release Lever - 1/4" Pin The Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. T... More Details

Quick Release Lever - 5/16" Pin The Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on both high-performance multi-hulls and monohulls. ... More Details

Quick Release Pin - 1/4" x 1" Specifications: Diameter: 1/4" Grip Length: 1" Use with: 14-205 and 14-206 Product Specifications Dimensions2" L × 1" W × 1" HShipping Weight0.05 lbCountry of OriginUNITE... More Details

Quick Release Pin - 3/16" x 9/16" Specifications: Diameter: 3/16" Grip Length: 9/16" Use with: 15-212 Product Specifications Dimensions2" L × 1" W × 1" HShipping Weight0.05 lbCountry of OriginUNITED S... More Details

Quick Release Pin - 3/8" x 13/16" Specifications: Diameter: 3/8" Grip Length: 13/16" Use with: O2 Series Product Specifications Dimensions2" L × 1" W × 1" HShipping Weight0.5 lbCountry of OriginUNITED... More Details

Quick Release Shroud Adjuster - 1/4" Pin Developed for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin. Specifications: Pin-to-pin adjus... More Details

Rigging Tape - Black - 1" x 15' C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins... More Details

Rigging Tape - White - 1" x 15' C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins... More Details

Rigging Toggle - 1/4" Pin These stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too... More Details

Rigging Toggle - 3/8" Pin These stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too... More Details

Rigging Toggle - 5/16" Pin These stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made to... More Details

Safe Lock Gate Hook T-316 Features: Stainless, safe, inexpensive design Practical Sailor called a "well-engineered hunk of metal"  Adjusts in place with knurled nut Stamped metal construction 3/4 in. ... More Details

Short Adjuster for 3/16" Wire Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. Specifications: 3/16" Wire 1/4" Pin 1" adj. Product Specific... More Details

Short Adjuster for 1/8" Wire Generally used at the stern rail in conjunction with the single gate eye to tension that section of the gate. Specifications: 1/8" Wire 1/4" Pin 1" adj. Product Specificat... More Details

Single Swivel Gate Eye for 1/8" Wire A single eye is used on one end of the gate area to attach the gate hook. Product Specifications Dimensions4" L × 1" W × 1" HShipping Weight0.1 lbCountry of Origin... More Details

Single Swivel Gate Eye for 3/16" Wire A single eye is used on one end of the gate area to attach the gate hook. Product Specifications Dimensions5" L × 1" W × 1" HShipping Weight0.1 lbCountry of Origi... More Details

Single Threaded Gate Eye for 1/8" Wire A single eye is used on one end of the gate area and threaded into eye nut. Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.15 lbCountry of O... More Details

Single Threaded Gate Eye for 3/16" Wire A single eye is used on one end of the gate area and threaded into eye nut. Product Specifications Dimensions7" L × 3" W × 1" HShipping Weight0.15 lbCountry of ... More Details

Single-Hook Anchor Chain Tensioner for 5/16" Chain These fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor fo... More Details

Small Boat Kit Kit Contents: (6) Clevis Pin Dia. 3/16" GL 17/32" (6) Clevis Pin Dia. 1/4" GL 1/2" (4) Clevis Pin Dia. 5/16" GL 11/16" (10) Cotter pin 3/32" x 3/4 Type 316 Stainless Steel (10) Circular... More Details

Snap Gate Hook - Body Only - 1/4" - 28 Left Hand For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook.  Spec... More Details

Snap Gate Hook - Body Only - 5/16" - 24 Left Hand For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook.  Spe... More Details

Snap Gate Hook - Body Only - 5/16" - 24 Right Hand For those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook.  Sp... More Details

Splice Eye to Splice Eye Fitting *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fitting... More Details

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice Eye Includes cross-hole for cotter pin *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow y... More Details

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice Eye Includes cross-hole for cotter pin *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow yo... More Details

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" LH with Splice Eye Includes cross-hole for cotter pin *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow y... More Details

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice Eye Includes cross-hole for cotter pin *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow yo... More Details

Splice Line Gate Kit - Aft for One Side C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are de... More Details

Splice Line Gate Kit - Midship for One Side C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings ar... More Details

Splice Line Large Boat Kit for Boats up to 40' C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings... More Details

Splice Line Small Boat Kit for Boats up to 30' C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings... More Details

Spreader Flag Halyard Kit Includes 40ft. of polyester line, block with bail and shroud cleat. Product Specifications Dimensions12" L × 7" W × 2" HShipping Weight0.7 lbCountry of OriginUNITED STATESHar... More Details

Stanchion Grommet for Drill Size 7/16"  For 3/16" and 1/4" Dyneema *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema ... More Details

T-Style Jaw/Jaw Open Body Turnbuckle - 1/4-28 Thread Size For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive lo... More Details

Toe Rail Folding Cleat The toe rail folding cleat makes a perfect movable, mid-ship cleat for spring lines, fenders, and more! This cleat is mountable on all aluminum toe rails. The rail is protected ... More Details

Toggle Jaw with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The... More Details

Tubular Turnbuckle with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fitti... More Details

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 1/4" - 2-Pack Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter pins. J... More Details

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 5/16" & 3/8" - 2-Pack Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter... More Details

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 7/16" & 1/2" - 2-Pack Wrap Pins are neat hook and loop locking devices used to secure turnbuckles without messing with unruly cotter... More Details

Jaw/Jaw Tubular Turnbuckle - Short For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjus... More Details

53696 Rod Safety Ring Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.   Made to secure into the 0.5" drain hole found at the bottom ... More Details

70 Series Socket for Screwless Rod Holder Installation Features: Required for the installation of screwless rod holders Fits 1/2" drive ratchet wrenches This product may not be returned to the origina... More Details

80 Series Wrench for Screwless Rod Holder Installation Crowsfoot Wrench Features: For use with 80 Series Screwless Rod Holders Allows for installation in locations with limited space This product may ... More Details

1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" Tongue Product Description This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", bla... More Details

1,000 lb Trailer Swivel Jack The 1,000 lb Trailer Swivel Jack is a must-have for any small boat or utility trailer. With a weight capacity of 1,000 lbs, this jack is designed to handle even the toughe... More Details

1,200 lb Trailer Swivel Jack The 1,200 lb Trailer Swivel Jack is a must-have for any small boat or utility trailer. With a weight capacity of 1,200 lbs, this jack is designed to handle even the toughe... More Details

1,500 lb Trailer Swivel Jack The 1,500 lb Trailer Swivel Jack is a must-have for any small boat or utility trailer. With a weight capacity of 1,500 lbs, this jack is designed to handle even the toughe... More Details

High quality, weather resistant carpet features a durable backing and minimal water retention.Velvet Finish, resist small rocks and mud, washes off clean each time boat trailer is backed into the wate... More Details

High quality, weather resistant carpet features a durable backing and minimal water retention.Velvet Finish, resist small rocks and mud, washes off clean each time boat trailer is backed into the wate... More Details

High quality, weather resistant carpet features a durable backing and minimal water retention.Velvet Finish, resist small rocks and mud, washes off clean each time boat trailer is backed into the wate... More Details

High quality, weather resistant carpet features a durable backing and minimal water retention.Velvet Finish, resist small rocks and mud, washes off clean each time boat trailer is backed into the wate... More Details

Heavy Duty Spare Tire Cover 27410 Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun a... More Details

Heavy Duty Spare Tire Cover 27420 Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun a... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. Part #:618-1... More Details

Heavy Duty Spare Tire Cover 27440 Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun a... More Details

2,500 lb Drop Leg Trailer Jack The C.E. Smith Drop Leg 2,500 lb Trailer Jack is a great option if you have an old drop leg jack that just isn't working like it used to. Replace it with this quality an... More Details

Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24" boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' wit... More Details

2" Stationary Keel Roller Assembly f/2" Tongue Product Description Stationary keel roller bracket assembly for a 2" wide tongue Bracket 1/8" thick Galvanized 5/8" shaft 1/2" hole 2-1/2" hole centers R... More Details

Each set outfits one wheel. Includes outer and inner. Part #:618-27111Manufacturer:C.E. SMITHManufacturer Part #:27111UPC:768296003029Order In Multiples Of:1Hub1.98" I.D.Spindle1" straightDiameterOute... More Details

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin. Part #:618-27112Manufacturer:C.E. SMITHManufacturer Part #:27112UPC:768296003036Order In Multip... More Details

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin. Part #:618-27113Manufacturer:C.E. SMITHManufacturer Part #:27113UPC:768296003043Order In Multip... More Details

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin. Part #:618-27115Manufacturer:C.E. SMITHManufacturer Part #:27115UPC:768296003050Order In Multip... More Details

Mount your spare tire vertically to the side of trailer tongue or frame rails. The trailer tongue in the front of the trailer. The offset design moves the tire and wheel up and away from the trailer f... More Details

Ideal for moving a small vessel such as a Jet Ski, Jon Boat, Small Sailboat, Dingy, or Inflatable around on any hard surface. Great for moving a vessel into a storage space or as a vessel display plat... More Details

Easily transport motors weighing up to 250 lbs45" Overall heightFolds flat for convenient storage Part #:618-27580Manufacturer:C.E. SMITHManufacturer Part #:27580UPC:768296009984Order In Multiples Of:... More Details

Smooth rolling guides assist in centering the boat onto the trailer. Ideal for retrieving boat on shallow ramps where the trailer is not far into the water, when alone, or have a crosswind or current ... More Details

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights Part #:618-27... More Details

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs... More Details

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs... More Details

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs... More Details

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs... More Details

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights Part #:618-27... More Details

Carpeted bunkboards provide proper center loading even in wind or side current conditions. Can be mounted on top of frame for extra heightHeight of 21'' with adjustment out to 13" from frame on each s... More Details

These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Mounting hardware included. Sold in pairs. Fit up to 3" W x 4-1/4" H frames. 1-1/2... More Details

Ideal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Pontoon glides easily past the carpeted bunk boards guiding the pontoon boat onto the trailer... More Details

Post Guide-Ons allow you to see the location of your trailer when it's under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy... More Details

Post Guide-Ons allow you to see the location of your trailer when it's under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy... More Details

3" Bow Bell Roller Assembly - Black TPR Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Features: Black TPR 4-1/2" diameter 6"... More Details

3" Bow Bell Roller Assembly - Blue TPR Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Features: Blue TPR 4-1/2" diameter 6" W... More Details

3" Bow Bell Roller Assembly - Yellow TPR Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Features: Yellow TPR 4-1/2" diameter ... More Details

3" Stationary Keel Roller Assembly f/3" Tongue Product Description Stationary keel roller bracket assembly for a 3" wide tongue Bracket 1/8" thick Galvanized 5/8" shaft 1/2" hole slots 3" hole centers... More Details

Makes accessing your boat easy, providing a stable and steady place to anchor your feet. It can be mounted anywhere that is suitable on trailer tongues or side rails. Fits any 2x3" or 3x3" rail, mount... More Details

4' Roller Bunk Roller bunks make loading and unloading small craft at very short or even dry rams easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and ... More Details

4" Adjustable Keel Roller Assembly f/2" Tongue - Black Product Description Adjustable keel roller bracket assemblies are perfect for adding keel support forward along the tongue. Features: Fits 2" ton... More Details

4" Bow Bell Roller Assembly - Black TPR Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Features: Black TPR 5-1/2" diameter 8"... More Details

4" Bow Bell Roller Assembly - Blue TPR Durable thermal plasticized rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Features: Blue TPR 5-1/2" diameter 8" W... More Details

4" Bow Bell Roller Assembly - Yellow TPR Product Description Durable Thermal Plasticized Rubber (TPR) bow bell assemblies help to center the boat and prevent bow to bowstand contact. Yellow TPR 5-1/2"... More Details