Select Category

1" Donut Collar, Zinc - C3 - 70-C3F1

Donut Collars For Shafts - Zinc

1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1

Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1

Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.

1" Bronze Intake Strainer - 00Is100 - 379-00Is100F1

Cast bronze w/nut.

1" Bronze Full Flow In-Line Ball Valve - Ibv-1000 Bspp - 34-Ibv1000Bsppf1

Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.

1" Bronze 45 Degree Street Elbow - 44205 - 38-44205F1

1" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.

1" Bearings, Pair - 81302 - 641-81302 Superseded By: 641-K71G0008F1

1" Ball Valve W/ Ss Lever - 70-105-10 - 37-7010510F1

Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1" Badger Brush - 10011 - 321-10011F1

Premium quality. Hand formed chisel edge. Cup chisel trim, natural stock and pencil style, clear wood handle.

1" Ace Brush - 12011 - 321-12011F1

Good quality brushes. Square trim, solid black plastic handle and 100% Black China bristle.

1" 3-Way Bronze Diverter Valve - 70-605-10 - 37-7060510F1

Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1" 233+ Paint Masking Tape - 26336 - 71-26336F1

Highly conformable tape provides outstanding paint lines.

1" & 1-1/8" Inline Non-Return Valve - Lv1218 - 698-Lv1218F1

Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.

1" & 1-1/2" Inline Non-Return Valve - Lv1215 - 698-Lv1215F1

Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.

1' Adaptor 14 Pin F 8 Pin - 896539T01 - 710-84-896539T01F1

1' 10/3 Stw 30Am-15Af Adt Blk Tt-30 Plug Type - 16-00553 - 636-1600553F1

1.77" Snap-Lock™ Seat Mount, Bulk - 19000 - 148-19000F1

Snaps into posts and locks for added securityE-coated for superior corrosion-resistance3° Tilt

1.77" Snap-Lock™ Adjustable Power Pedestal - 39204 - 148-39204F1

Integral seat mount1.77" diameter postClear anodized aluminum finish

1.7"Riser Kit-Dry Joint-Rwc-Ts - 866007A01 - 710-866007A01F1

1.5" Onyx Brush - 12023 - 321-12023F1

A better quality with chisel trim, painted foam black handle and 100% white china bristle.

1.5" Fooler Brush @36 - 10015 - 321-10015F1

100% natural bristle. Double the thickness and holds more coating of a typical chip brush. Square trim, wood handle. Recommended for epoxy and polyester resins, bottom paint, industrial coating, but not for fine finishes.Sold in Full Boxes Only.

1.5" Ball Quick Release Kayak Track Base - Rap-383U - 170-Rap383Uf1

For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of kayak products including RAM fishing rod holders, camera and transducer deployment arms. Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten the base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Track Dimensional Range: .250" MIN. - .562" MAX. High strength composite. Quick release and installationEasily relocate adapter along track, can be installed at any point on the trackHigh strength materials ensure product longevityCompatible with RAM-ROD™ holders with 1.5" ball and any 1.5" RAM accessoryLifetime warranty

1.5" Badger Brush - 10021 - 321-10021F1

Premium quality. Hand formed chisel edge. Cup chisel trim, natural stock and pencil style, clear wood handle.

1.5" Ace Brush - 12021 - 321-12021F1

Good quality brushes. Square trim, solid black plastic handle and 100% Black China bristle.

1.5 Mil Clear Plastic Sheeting - Cf01520200C - 28-Cf01520200Cf1

Use for paint protection, vapor barrier, moisture barrier and insulation.

1.5 Mil Clear Plastic Sheeting - Cf01512200C - 28-Cf01512200Cf1

Use for paint protection, vapor barrier, moisture barrier and insulation.

1.5 Ball System Top Plate - 165 - 736-0165F1

1.5 Ball System Base - 166 - 736-0166F1

1.5 Ball System Arms - 161 - 736-0161F1

1.5 Ball Mnt W/Sm 5-7 Sndr Plt - 164 - 736-0164F1

1.2Cu In Helm W X52 Tilt - Up20T-X52 - 216-Up20Tx52F1

1.25 Wall Cap, 2 Wipe 20Ft Per Box Old Item # 04003097 - 1000035109 - 987-1000035109F1

1.0M Daisy Chain Cbl Alpha Pd - A80747 - 152-A80747F1

1-Pc. Replacement Drive Gear - Dv372 - 57-Dv372F1

1-3/8In Cam Lock Bell Rv Rvx - 18-3076 - 799-183076F1

1-3/8" Donut Collar, Zinc - C6 - 70-C6F1

Donut Collars For Shafts - Zinc

1-3/8 X 1-7/8 X 5-1/2 Brass Cutless Bearing - Devilfish - 87-Devilfishf1

Pollution-Free Naval Brass Marine BearingsBrass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for yearsMorse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII. Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing. Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi. Example: (RAY)- 3" shaft dia. x 12" length 36 sq." bearing area x 35 psi 1,260 lbs. Is bearing load capacity

1-3/8 Bearings Bulk Pk/10 - 81160 - 641-81160F1

Sized to fit all popular trailers.

1-3/4" Door Hook Chrome Plated Zinc - 1199Dp1Chr - 9-1199Dp1Chrf1

Chrome plated zinc.

1-3/4" Donut Collar, Zinc - C8 - 70-C8F1

Donut Collars For Shafts - Zinc

1-29/32In Black Bulk 20' Rigid Rub Rail - V21-0457Bka20D - 236-V210457Bka20Df1

1-1/8" White Plastic Thru-Hull W/Broad Flange - 18090 - 50-18090F1

Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.

1-1/8" Shaft Anode, Zinc - Cmx04 - 194-Cmx04F1

Streamlined Shaft Anodes w/Allen Screw

1-1/8" Donut Collar, Zinc - C4 - 70-C4F1

Donut Collars For Shafts - Zinc

1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1

Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.

1-1/8 Striker Base Flush Mt. - F16-0212-F - 236-F160212Ff1

Features 12 locking positions with hex nut design. Made with Type-316L Stainless Steel. Will fit both port and starboard bases. Welded locking adapter for maximum strength. Removable arms for unobstructed decks. Fits 12' & 15' standard tele-outriggers. 45° gunnel mount base. 3 Year warranty.

1-1/8 Std Bilge Hose X 9' Wht - 121-1182 - 50-23498F1

1-1/8 Std Bilge Hose X 50' Wht - 121-1186 - 50-23499F1

1-1/8 Ql Elbow Thru-Hull Blk 15/08 - Ma-042-Qlb - 81-Ma042Qlbf1

1-1/8 Hd Pvc Spir Blg X 50 Clr - 145-1186 - 50-23488F1

1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1

Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".

1-1/4X6 Ss Piano Hinge Polish. - H14-0114P72 - 236-H140114P72F1

Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.

1-1/4X3/4 Bronze Reduce Coupling - 44445 - 38-44445F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4Inx5In One-Pc Sink Strnr Bell Rv Rvx - 95215 - 342-95215F1

1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1

Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.

1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1

Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1

Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Shut-Off Full Flow Ball Valve - 77-106-10 - 37-7710610F1

Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Shaft Anode, Zinc - Cmx05 - 194-Cmx05F1

Streamlined Shaft Anodes w/Allen Screw

1-1/4" Shaft Anode Ext Heavy, Zinc - Cmx05A - 194-Cmx05Af1

Streamlined Shaft Anodes w/Allen Screw

1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1

Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Rudder Collar - 00Rc125 - 379-Rc125F1

Cast bronze.

1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1

Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.

1-1/4" Full Flow Ball Valve, Low Profile - 00Bbv125Lp - 379-00Bbv125Lpf1

Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.

1-1/4" Donut Collar, Zinc - C5 - 70-C5F1

Donut Collars For Shafts - Zinc

1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1

Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.

1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1

Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.

1-1/4" Bronze Intake Strainer - 00Is125 - 379-00Is125F1

Cast bronze w/nut.

1-1/4" Bronze Full Flow In-Line Ball Valve - Ibv-1250 Bspp - 34-Ibv1250Bsppf1

Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Bronze 45 Degree Street Elbow - 44206 - 38-44206F1

1-1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4" Ball Valve W/ Ss Lever - 70-106-10 - 37-7010610F1

Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 X 5 Brass Pipe Nipple - 40127 - 38-40127F1

1-1/4 X 5 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 X 3/4 Bronze Hex Bushing - 44517 - 38-44517F1

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 X 1 Bronze Reduce Coupling - 44446 - 38-44446F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 X 1 Bronze Hex Bushing - 44518 - 38-44518F1

Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 Std Bilge Hose X 50' Wht - 121-1146 - 50-23497F1

1-1/4 Softwall Water X 12-1/2' - 110-1144 - 50-23766F1

1-1/4 Slot Hi Spd Thru Hul Brz Bronze Thru Hull - Hsslth-1250-W - 34-Hsslth1250Wf1

1-1/4 Sink Drain (10300) - 10300 - 390-10300F1

These sink drains fit all Scandvik sinks except 10280 & 10662. Fit a 2-7/16" drain hole opening.1-1/4" Sink Drain:Includes drain, stopper & chain.

1-1/4 Brz Floor Flange Brass Fittings - 44-695 - 38-44695F1

1-1/4 Bronze Pipe Tee - 44256 - 38-44256F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 Bronze Pipe Coupling - 44416 - 38-44416F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 Bronze Pipe Cap - 44476 - 38-44476F1

Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 Bronze 90 Deg Street Ell - 44166 - 38-44166F1

Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1

Cast bronze. Meets requirements of USCG safety standards.

1-1/2X6 Ss Piano Hinge Pol. - H14-0112P72 - 236-H140112P72F1

Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.

1-1/2X1-1/4 Bronze Reduce Couplng - 44450 - 38-44450F1

Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.

1-1/2Inx3/4In Drain Connector Bell Rvx - T01-0094Vp - 800-T010094Vpf1

1-1/2" Yachtsman Brush - Z112015 - 391-Z112015F1

White China bristle brush, chisel construction, produces a smooth finish with alkyd and oil-based varnishes, marine paints, stains, and urethanes. Round brass-plated steel ferrule; black solid plastic handle.

1-1/2" Y Valve - 45490-1000 - 6-454901000F1

Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.

1-1/2" White Interior/Exterior Light W/Ss Bezel - 6342Ss7 - 23-6342Ss7F1

These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.

1-1/2" Water Pipe Deck Plate - 0528Dpwchr - 9-0528Dpwchrf1

Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.

1-1/2" Unmarked Pipe Deck Plt - 0528Dp8Chr - 9-0528Dp8Chrf1

Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.

1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1

Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.