Select Category
_0x200.jpg)
Attwood Transom Saver Adjustable 23-35" - 400-B - 148-400Bf1
Deluxe head with composite padsBolt or roller mounting bracketSupports weight of the motorStabilizes both your engine and steering mechanism during trailering
Attwood Transducer Mounting Plate And Hardware - 94110-5 - 23-941105F1
For easy mounting, addition and replacement of transducers Marine grade polymer will not warp, corrode or be affected by UV raysMounts easily with two screws
Attwood Trailer Tongue Lift Handle - 11130-7 - 23-111307F1
Convenient handle for maneuvering trailer tongue. Mounts easily to most trailer couplers.
Attwood Trailer Guide Lights (Sold As Pair) - 14066-7 - 23-140667F1
Trailer guide lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. NOTE: Mounting hardware not included.
Attwood Toggle On/Off/On Switch, Metal Handle - 14255-3 - 23-142553F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Toggle On/Off Switch, Metal Handle - 14253-3 - 23-142533F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Thru Hull Stainless Steel 5/8" For Hose, Short - 66540-3 - 23-665403F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 5/8" For Hose - 66546-3 - 23-665463F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose, Short - 66541-3 - 23-665413F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose - 66547-3 - 23-665473F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose, Short - 66542-3 - 23-665423F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose - 66548-3 - 23-665483F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose, Short - 66543-3 - 23-665433F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose - 66549-3 - 23-665493F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose, Short - 66544-3 - 23-665443F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose - 66550-3 - 23-665503F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose, Short - 66545-3 - 23-665453F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose - 66551-3 - 23-665513F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Scupper For Hose, White - 1-1/2" - 723548 - 23-38811F1
The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and closes to help prevent backwash from entering cockpit. Installation hole size is 2".
Attwood Thru Hull Connector For Hose, White, 90 Degree - 3/4" - 722146 - 23-38773F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 5/8" - 720320 - 23-38723F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 729086 - 23-38963F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 720685 - 23-38733F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/8" To 1-1/4" - 721050 - 23-38743F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/2" - 721415 - 23-38753F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood SWIVL-EZE Lock'N-Pin 3/4" Pedestal Kit 13" Post 7" x 7" Stainless Steel Base Plate Threaded
Attwood SWIVL-EZE LakeSport 2-3/8" Seat Mount w/Friction Control - Aluminum
Attwood Suzuki 3/8" Barb Female Hose Fitting - Under 75HP
Attwood Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle
Attwood Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces
Attwood Sure-Grip Clamp-On Rail Base - Fits Up To 7/8" Diameter
Attwood Sure Grip Rod Holder 5 Degree 8" Horizontal - 1154593 - 23-50613F1
Designed for drift fishing, pan fishing, and more 3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface mount
Attwood Stowaway All Round Light, 36" W/ Base - 7100C7 - 23-7100C7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Attwood Stowaway All Round Light, 30" W/ Base - 7100B7 - 23-7100B7F1
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Attwood Steering Wheel Soft Grip 13" - 2343122 - 23-83154F1
Ideal for bass boats and runabouts. Comfortable firm grip, soft, black PVC outer rim and high-impact, one-piece plastic inner core. Non-magnetic. Black plastic center cap. Fits standard 3/4" shaft. 3-3/8" dish.
Attwood Standard Size Wire Frame Drink Holder - 11670-4 - 23-116704F1
Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws.
Attwood Standard Non-Vented Battery Box For Group 24/24M, Black - 2618426 - 23-90691F1
Non-vented. All battery boxes meet ABYC standard E-10 and U.S.C.G. Specification Number 183.420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps resist 350 pounds of force, nearly four times the U.S.C.G. requirement. Battery boxes are drop tested in temperatures ranging from -20°F to +120°F. Mounting hardware is included.
Attwood Standard Glove Box Black - 269551 - 23-26381F1
Plastic box and door are lightweight and sturdy. Opens easily on a stainless steel hinge pin and locks with a marine locking latch. Installation hole size is 12"L x 4-1/4"H.
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner Diameter
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 3/4" Inner Diameter
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1" Inner Diameter
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner Diameter
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/4" Inner Diameter
Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 5/8" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 1" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 1-1/8" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 1-1/4" Inner Diameter
Attwood Stainless Steel Thru-Hull Short Straight Barbed - 1-1/2" Inner Diameter
Attwood Stainless Steel Scupper Valve Barbed - 1-1/2" Hose Size
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 90 Lb - St34-90-5 - 23-St34905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 60 Lb - St34-60-5 - 23-St34605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 40 Lb - St34-40-5 - 23-St34405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 20" Extended, 12" Compressed, 20 Lb - St34-20-5 - 23-St34205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 90 Lb - St36-90-5 - 23-St36905F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 17.2" Extended, 10.2" Compressed, 70 Lb - St36-70-5 - 23-St36705F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 60 Lb - St33-60-5 - 23-St33605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 40 Lb - St33-40-5 - 23-St33405F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 15" Extended, 9.5" Compressed, 20 Lb - St33-20-5 - 23-St33205F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 12" Extended, 8.5" Compressed, 60 Lb - St35-60-5 - 23-St35605F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood Stainless Gas Spring 8Mm Rod 10.5" Extended, 7.5" Compressed, 30 Lb - St32-30-5 - 23-St32305F1
These popular stainless steel replacement gas springs offer more durability than ever before. The pressure tube and rod are super-tough #316 Stainless Steel alloy and all other exposed components are either stainless steel or marine-grade composite. Ideal for saltwater use or any other application where good looks and quality make a difference. Perfect for livewells, line lockers, deck hatches, and other moisture-prone areas.
Attwood St11401 Gas Spring 7.5" Extended, 5.25" Compressed, 40 Lbs. - St11-40-1 - 23-St11401F1
Popular replacement gas springs. Made with bio-degradable, no hazard to water, grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Mounting brackets available separately.
Attwood Square 2 Pin Base For Straight Pole - 911370-1 - 23-9113701F1
Nylon. For traditional Attwood pole lights. Hinged cover snaps closed to keep dirt and water out when light is stowed. Four countersunk holes for installation. Includes 7-1/2" hard wire leads for connection to 12 VDC power supply. Dimensions: 2-1/4"L x 1-3/4"W. 1-1/4" diameter installation hole.Base fits the following poles: Frosted globe 5100 series standard pole & 5110* series locking collar pole; Anti-glare 5320*, 5330*, & 5340* series; Pulsar bi-color poles 5092*. (*when locking-collar is removed).
Attwood Springlift Black Composite - 10mm Socket - Extended 26.9" - Compressed 15.2"
Attwood Spare Tire Carrier - 11090-3 - 23-110903F1
Square bend u-bolt with bracket mounts tire on tongue or trailer frame. Fits frames 2" square or rectangular 3-1/2" x 4". Fits 4 or 5 lug hole rims. Extra long 8-1/2" shaft fits 8" to 15" tires. Padlock is not included.
Attwood Sp67739T Lock-N-Pin Base Plate 7" X 7" Threaded - Sp-67739-T - 148-Sp67739Tf1
Locks together to prevent unintentional detachment
Attwood Sp67739 Lock-N-Pin Base Plate 7" X 7" - Sp-67739 - 148-Sp67739F1
Locks together to prevent unintentional detachment
