Select Category
_0x200.jpg)
Led Light Puck 4.5 W/Switch 12V Wht Surface Mt, W/Switch Wisbeam, Snap-On Lens - L855 - 350-L855F1
Led Light Puck 3.5 W/Switch 12V Wht Surface Mt Snap-On Lens - L845 - 350-L845F1
Led Light Oval Porch Blk .097A On/Off Switch, 6.25 X3.4 X2 2-Wire - L860 - 350-L860F1
Led Light 12V Slim Pancake Sgl 4.5 X7.5 .14A Wht 2 Wire W/Switch - L820 - 350-L820F1
Led Light 12V Puck 4.5 Wht Surface Mt W/Frosted Lens Wisbeam - L850 - 350-L850F1
Led Light 12V Puck 3.5 Wht Surface Mt, Snap-On Lens - L840 - 350-L840F1
Led Light 12V Pancake Single Eurostyle 4.75 X8 W/Switch, 2 Wire, .19A, Wht - L800 - 350-L800F1
Led Light 12V Pancake Double Eurostyle 4.75 X11 W/Switch 2 Wire, .38A, Wht - L805 - 350-L805F1
Led Int Single Pancake Lt Ww - 52429-Ww - 681-52429Wwf1
OEM or Retro replacement. New high efficient SMD Diodes, approximatley 175 Lumen, 3500 Kelvin, warm white, .12 Amp draw. White housing, surface mount and easy switch, 3 way switch for use of one or both, 2 wire. 7.50 x 4.25" x 1.75". 52551 Single light bezel for square replacement.
Led Int Flouresc Rplcmnt Replaces P/N 681-Dg52529Vp Replaces P/N 681-52529 - Dg52529Pb - 681-Dg52529Pbf1
Led Int 5In Frosted Rec Bell Rv Replaces P/N 681-52525 - Dg52525Vp - 681-Dg52525Vpf1
Led Grommet Mt Oval Stop, Turn & Tail Light Kit - V821Kr-7 - 177-V821Kr7F1
A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.Includes light, grommet & pigtail.
Led Green 11/64" 120 Vac - 8034-Bss - 661-8034F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led Green 11/34" 12Vac - 8172-Bss - 661-8172F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led G4 Replacement Bulbs, Red - 41033P - 390-41033Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs, Blue - 41032P - 390-41032Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs, Blue - 41022P - 390-41022Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41070P - 390-41070Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41053P - 390-41053Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41052P - 390-41052Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41051P - 390-41051Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41031P - 390-41031Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41030P - 390-41030Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41021P - 390-41021Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41020P - 390-41020Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulbs - 41000P - 390-41000Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulb - 41041P - 390-41041Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulb - 41040P - 390-41040Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulb - 41011P - 390-41011Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led G4 Replacement Bulb - 41010P - 390-41010Pf1
Replacement LED in clamshell.Multi-Voltage 10 - 30 VDC (works with 12V and 24V).High output SMD 5050 LED's (similar or brighter than comparable halogen or incandescent bulbs).60% plus more efficient (low amp draw).Low temperature, cool to the touch.
Led Fold Down All Around Pontoon Light, 9" - 400023-1 - 354-4000231F1
LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Led Fold Down All Around Pontoon Light, 24" - 400026-1 - 354-4000261F1
LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Led Flush Mount Combo Drink Holder W/Drain Fitting - 588074-1 - 354-5880741F1
Features three LEDSs for night visiion. Allows the use of beverage cans with or without insulated wraps, as well as most standard size bottles. Drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Constructed of corrosion resistant stamped 304 stainless. 12VDC.
Led Flush Mount Combo Drink Holder W/Drain Fitting - 588071-1 - 354-5880711F1
Features three LEDSs for night visiion. Allows the use of beverage cans with or without insulated wraps, as well as most standard size bottles. Drain fitting allows water to be drained directly into bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Constructed of corrosion resistant stamped 304 stainless. 12VDC.
Led Flexible Pcb 50/50 Board Rope Lights, Bright White - 41510P - 390-41510Pf1
12mm LED Flexible SMD50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Can be cut every 3", and includes 12mm mounting clips and 2 silicone end caps, interior or exterior mount (IP68 waterproof rating). Dimmable (with optional 41606 controller)
Led Flexible Pcb 50/50 Board Rope Lights, Blue - 41521P - 390-41521Pf1
12mm LED Flexible SMD50/50 boards are encapsulated in a rectangular silicon tube that is waterproof and resistant to UV and most cleaners. Perfect for under valances, gunnels, hard tops, dive platforms and pontoon boats. Wired on both ends to simplify daisy chaining and cutting into two lengths. Can be cut every 3", and includes 12mm mounting clips and 2 silicone end caps, interior or exterior mount (IP68 waterproof rating). Dimmable (with optional 41606 controller)
Led Flange Mt Oval Stop, Turn & Tail Light Kit - V822Kr-7 - 177-V822Kr7F1
A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range. Meets FMVSS 108 requirements in horizontal, vertical or any 360 degree position.Includes light w/flange & pigtail.
Led Dual Color Flex Strip, Red/White - 41517P - 390-41517Pf1
Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel
Led Dual Color Flex Strip, Red/White - 41515P - 390-41515Pf1
Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel
Led Dual Color Flex Strip, Blue/White - 41516P - 390-41516Pf1
Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel
Led Dual Color Flex Strip, Blue/White - 41514P - 390-41514Pf1
Strips can be cut on the cut-marks and can be wired together to make longer runs. Short lengths are wired on both ends16' Reels can be cut on cut marks and sealed with end caps16' Reels can be wired together for long runsIP-68 waterproofSMD 5050 LEDBlue, Red or Cool White or dual colorFits 14mm Flex-Trak mounting channel
Led Day/Night Dome Light, Chrome - 401755-1 - 354-4017551F1
LED Day/Night Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off/on rocker switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with #8 RH fasteners (not included).
Led Courtesy Interior Light - - 590-3004F1
12V. 4 LED lights. Pre-drilled to accommodate #6 screws. 3" Dia. x 5/8" D. Packed with both chrome and white bezels.
Led Courtesy Button Light - 360°, White Light - 401370-1 - 354-4013701F1
Stamped 304 stainless steel and plastic. Utilizes one bright white LED that draws very low amperage and has very long life.
Led Clearance Light Red Anderson Marine Division Rvx - V168R - 177-V168Rf1
Led Back Up Lamp Kit White Bell Rv Replaces P/N 681-52437 - Dg52437Vp - 681-Dg52437Vpf1
Led Amber 11/64" 12Vac - 8033-Bss - 661-8033F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led 6" Oval Sealed Tail Light Kit For Flush Mount - - 590-1159F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofKit includes light, grommet and plug3-Function: Red stop/turn/tail lightWith A70GB grommet and A47PB pigtail, PL-3 connection
Led 6" Oval Sealed Lights For Surface Mount - - 590-1160F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed. Mount in any 360 degree positionSonically sealed, waterproofFlange surface mount-no panel cut-out required3-function: Red stop/turn/tail light
Led 6 Oval White Bkup Lt Grm Mount - 283565 - 274-283565 Superseded By: 158-Bul10Cbpf1
Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".
Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!
Led 12V Chrome Sidelights Pr - 0602Dp1Chr - 9-0602Dp1Chrf1
For replacement use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.
Led (Cree) Docking Lights - 405951-1 - 354-4059511F1
Constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.
