Designed for the Canadian Climate
Free delivery within our service area (Kingston, Brockville, Ottawa, and in between) For Marine Shrink Wrap Products
Results 6001 - 6100 of 58739
Grid
Tinned copper for corrosion resistance in the marine environment. Very flexible and easy to use. Part #:639-142425Manufacturer:ANCORManufacturer Part #:142425UPC:091887807141Order In Multiples Of:1Gau... More Details
Tinned copper for corrosion resistance in the marine environment. Very flexible and easy to use. Part #:639-142610Manufacturer:ANCORManufacturer Part #:142610UPC:091887807172Order In Multiples Of:1Gau... More Details
Tinned copper for corrosion resistance in the marine environment. Very flexible and easy to use. Part #:639-142625Manufacturer:ANCORManufacturer Part #:142625UPC:091887807189Order In Multiples Of:1Gau... More Details
Tinned copper for corrosion resistance in the marine environment. Very flexible and easy to use. Part #:639-142810Manufacturer:ANCORManufacturer Part #:142810UPC:091887807226Order In Multiples Of:1Gau... More Details
Marine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative) depending on speaker manufacturer. Ancor's new universal speaker co... More Details
Marine speakers are equipped with male disconnects in two sizes (.250 tab for positive and either .188 tab or .110 tab for negative) depending on speaker manufacturer. Ancor's new universal speaker co... More Details
Perfect for aisle lighting and use in service bodies 36 diodes Part #:177-3631Manufacturer:ANDERSONManufacturer Part #:363-1Order In Multiples Of:1LED ColorWhiteLength24"Voltage12Width.32" Variations More Details
My Wishlist
Compare

Anderson 4-Way Trailer Harness Kit 25' - V5425Y - 177-V5425Yf1

Anderson, Rails, Ladders & Seating
$38.39
Wishbone type. Four-conductor harness designed to split at trailer tongue and run down each side of trailer with flat 4-way plug. Provides for easier installation of side marker lights as well as elim... More Details
Sealed, oval back-up light meets DOT requirements in either horizontal or vertical position. Polycarbonate lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details
My Wishlist
Compare

Anderson 4654K Reflective Marking Tape, 4-Pk - 465-4K - 177-4654Kf1

Anderson, Sealants, Adhesives & Repair
$21.39
High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflect... More Details
My Wishlist
Compare

Anderson 465K Reflective Marking Tape, 8-Pk - 465K - 177-465Kf1

Anderson, Sealants, Adhesives & Repair
$40.78
High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflect... More Details
Corrosion resistant ABS housings and rims with matte black finish. Precision cast, hardened glass lenses and vaporize aluminum coated reflectors. Part #:177-VH550Manufacturer:ANDERSONManufacturer Part... More Details
My Wishlist
Compare

Anderson 7-To-4-Way Harness Adapter - E5414 - 177-E5414F1

Anderson, Hoses, Clamps & Fittings
$14.64
Quick and easy to connect. Full-length plugs shall ensure positive latching; non-corrosive nylon shell and the insert eliminates make shift jumpers. Part #:177-E5414Manufacturer:ANDERSONManufacturer P... More Details
My Wishlist
Compare

Anderson 7-To-5-Way Harness Adapter - E5415 - 177-E5415F1

Anderson, Hoses, Clamps & Fittings
$18.95
Quick and easy to connect. Full-length plugs shall ensure positive latching; non-corrosive nylon shell and the insert eliminates make shift jumpers. Part #:177-E5415Manufacturer:ANDERSONManufacturer P... More Details
May be used with the 416/421/420/423 series of oval lights and with other similar competitors' lights. Use in vertical or horizontal position. Black powder coat steel finish. Part #:177-42109Manufactu... More Details
Sonic welded stud mount light provides clearance and side marker light functions. Unit has single 15" wire for electrical connection and grounds through mounting stud. Part #:177-E151AManufacturer:AND... More Details
Replacement driver side lens. Part #:177-B457L15Manufacturer:ANDERSONManufacturer Part #:B457L-15UPC:044464935379Order In Multiples Of:1DescriptionDriver Side Lens Variations177-B45715Anderson Combina... More Details
Replacement passenger side lens. Part #:177-B45715Manufacturer:ANDERSONManufacturer Part #:B457-15UPC:044464935386Order In Multiples Of:1DescriptionPassenger Side Lens Variations177-B457L15Anderson Co... More Details
Multi-function tail light exceeds DOT requirements for stop, turn, tail and rear reflector. Driver side includes license illuminator and license plate mounting bracket. High impact housing will never ... More Details
Multi-function tail light exceeds DOT requirements for stop, turn, tail and rear reflector. High impact housing will never corrode and tail light lens exceeds 12 sq. in. of luminous lens area. Grounds... More Details
Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range Part #:177-V171AManufacturer:ANDERSONManufacturer Part #:V171AUPC:044464984117Order In Multiples Of:1LensAmberLens Co... More Details
Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range Part #:177-V171RManufacturer:ANDERSONManufacturer Part #:V171RUPC:044464984124Order In Multiples Of:1LensRedLens Colo... More Details
16 Diode LED auxiliary light Includes bracket for surface mounting, or can be recess-mountedLow amp drawPerfect for aisle lighting Part #:177-V388CManufacturer:ANDERSONManufacturer Part #:V388CUPC:044... More Details
16 Diode LED auxiliary light Includes bracket for surface mounting, or can be recess-mountedLow amp drawPerfect for aisle lighting Part #:177-V388WBManufacturer:ANDERSONManufacturer Part #:V388WBUPC:0... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details
6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics. Part #:177-V180AManufacturer:ANDERSONManufacturer Part... More Details
6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics. Part #:177-V180RManufacturer:ANDERSONManufacturer Part... More Details
Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.... More Details
Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. P... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. P... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Part #:177-V170AManufac... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Part #:177-V170RManufac... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details
14 high-output Great White® diodes for bright illumination for interior applications. Operating range is 9-16 volts. Mounts on 2-3/16" centers with two hardwired leads. Part #:177-V381XManufacturer:AN... More Details
Oval, 10-diode LED stop, turn and tail light designed for horizontal installation. Meets DOT requirements. Operates from 9-16 volts. Hard-wired design eliminates the need for separate plug and grommet... More Details
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details
Submersible rear lighting kit for all trailers 80" wide and over Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructionsReplacement harness available se... More Details
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details
Super bright LED optics. 100,000 hour rated life. Submersible - no bulb breakage. Low amp draw. Kit contains: two multi-function LED stop, turn and tail lights, license bracket, mounting and wiring ha... More Details
My Wishlist
Compare

Anderson Metals Flared Cap - 04040-06 - 110-0404006F1

Anderson Metals Corp, Safety Gear
$3.99
Flared Cap Part #:110-0404006Manufacturer:ANDERSON METALS CORPManufacturer Part #:04040-06UPC:719852106449Order In Multiples Of:1DescriptionFlared CapSize3/8" Variations110-0401406Anderson Metals Shor... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware. Part #:177-M108WAMa... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware. Part #:177-M108WRMa... More Details
Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range Part #:177-V171CManufacturer:ANDERSONManufacturer Part #:V171CUPC:044464984131Order In Multiples Of:1LensClearLens Co... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug. Part #:177-... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug. Part #:177-... More Details
Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details
Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details
For all trailers over 80" wide. Kit provides all rear legal lighting and reflectors for trailers over 80" wide. Includes one each low profile 456/456L tail light, 25' trailer harness, 48" trunk connec... More Details
Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details
Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details
Kit includes one each 452/452L tail light, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions. Part #:177-V544Manufacturer:ANDERSONManufacturer... More Details
Functions as a side marker or clearance light; may be used as a combination light when mounted properly. Lens is welded to housing. Features a 15,000 long-life bulb.Kit includes 150 light, chassis mou... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Part #:177-10815AManufacturer:ANDERSONManufacturer Part #:108-15AUPC:044464904948Order In Multiples Of:1Des... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Part #:177-10815RManufacturer:ANDERSONManufacturer Part #:108-15RUPC:044464904955Order In Multiples Of:1Des... More Details
May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details
My Wishlist
Compare

Anderson Sealed 2" Clearance/Side Marker Light, Red - 146R - 177-146Rf1

Anderson, Seals, Gaskets & Service Kits
$6.39
May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details
My Wishlist
Compare

Anderson Trailer-Trunk 30" Extension - E5401 - 177-E5401F1

Anderson, Rails, Ladders & Seating
$22.29
Harness extensions available in both 4-way and 5-way flat configurations. Each configuration has trailer connector on one end and trunk connector on other. Perfect for those times when an extension is... More Details
Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8". Part #:177-E440Manufac... More Details
Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8". Part #:177-E440LManufa... More Details
Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details
Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details
Kit includes one each of 441/441L tail light, two 108A side marker lights, 20' trailer harness, 48" truck connector, license bracket, mounting hardware and installation instructions. Black housing. Va... More Details
Kit provides all legal lighting and reflectors for trailers under 80" wide. Includes one each of the 440/400L tail lights, two 114A side marker lights, 20' trailer harness, 48" trunk connector, licens... More Details
Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate grou... More Details
With integral reflex 15,000-hour-rated long-life single replaceable incandescent bulb Part #:177-V112AManufacturer:ANDERSONManufacturer Part #:V112AOrder In Multiples Of:1Lens ColorAmber Variations More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
2 diodes Polycarbonate lens and base are welded together to form a single rugged unit.Side of 203C lens painted to meet license illuminator requirementsLED version of our popular 150 series light. Int... More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
2 diodes With clear polycarbonate lens for utility use onlyInterchangeable with competitive unitsSurface Mount Kit includes 150-09 mounting bracket, gasket, and two screws.2.48" L x 1.2" W x 0.84" D P... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D." Part #:177-V254915AManufacturer:ANDERSONManufacturer Part #:V2549-15AOrder In Multiples Of:1... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D." Part #:177-V254915RManufacturer:ANDERSONManufacturer Part #:V2549-15ROrder In Multiples Of:1... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D." Part #:177-V2549AManufacturer:ANDERSONManufacturer Part #:V2549AOrder In Multiples Of:1Lens ... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D." Part #:177-V2549RManufacturer:ANDERSONManufacturer Part #:V2549ROrder In Multiples Of:1Lens ... More Details
Red replacement lens for RV Stop/Turn/Tail light Part #:177-V2591125Manufacturer:ANDERSONManufacturer Part #:V25911-25UPC:044464972602Order In Multiples Of:1Fits25911 seriesDescriptionLensColorRedFor ... More Details
Red replacement lens for RV Stop/Turn/Tail light Part #:177-V2591225Manufacturer:ANDERSONManufacturer Part #:V25912-25UPC:044464972619Order In Multiples Of:1Fits25912 seriesDescriptionLens w/Back Up L... More Details
Red replacement lens for RV Stop/Turn/Tail light Part #:177-V2591325Manufacturer:ANDERSONManufacturer Part #:V25913-25UPC:044464972626Order In Multiples Of:1Fits25913 seriesDescriptionLens w/License L... More Details
Red replacement lens for RV Stop/Turn/Tail light Part #:177-V2591425Manufacturer:ANDERSONManufacturer Part #:V25914-25UPC:044464972633Order In Multiples Of:1Fits25914 seriesDescriptionLens w/License &... More Details
DOT compliant. Popular for RV applications. Not for marine use Integral ReflexSurface mount rear combination incandescent tail lightSurface mounts on 7.25" centers. 8.6"W x 4.6" H x2" D. Part #:177-V2... More Details
DOT compliant. Popular for RV applications. Not for marine use Integral Reflex Part #:177-V25923Manufacturer:ANDERSONManufacturer Part #:V25923Order In Multiples Of:1DescriptionDriver Side w/License L... More Details
Rugged high impact plastic dome light with built-in switch, ideal for general interior illumination. Corrosion resistant, even the switch is plastic. Translucent white lens provides diffused light, sn... More Details
Essential for proper operation of any gas filled lift support. Crafted in solid stainless steel. Includes 10mm ball stud. Part #:11-GS62900Manufacturer:SIERRAManufacturer Part #:GS62900UPC:80828213457... More Details
Essential for proper operation of any gas filled lift support. Crafted in solid stainless steel. Includes 10mm ball stud. Part #:11-GS62860Manufacturer:SIERRAManufacturer Part #:GS62860UPC:80828213449... More Details
Essential for proper operation of any gas filled lift support. Crafted in solid stainless steel. Includes 10mm ball stud. Part #:11-GS62870Manufacturer:SIERRAManufacturer Part #:GS62870UPC:80828213451... More Details
My Wishlist
Compare

Angle Mount Hold Down Clamp - 1113Dp0Chr - 9-1113Dp0Chrf1

Perko, Hoses, Clamps & Fittings
$188.79
Chrome plated bronze. Part #:9-1113DP0CHRManufacturer:PERKOManufacturer Part #:1113DP0CHRUPC:085226340901Order In Multiples Of:1Mount90°Size2-1/2" x 1-1/2"Fastener#8Fastener Size#8Mount Type90° Variat... More Details
Polished stainless steel flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap. Fasteners: #10. Part #:9-0452DP0STSManufacturer:PERKOManufacturer Part #:0452DP0S... More Details
Chrome plated zinc alloy flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap. Part #:9-1205DP0CHRManufacturer:PERKOManufacturer Part #:1205DP0CHRUPC:0852265581... More Details
My Wishlist
Compare

Angler Compass Bracket Mount - Ra-91 - 128-Ra91F1

Ritchie Navigation, Navigation & Signaling
$197.19
100% repairable. Features a 2-3/4" direct-reading blue dial, internal green night lighting, built-in compensators to easily adjust for deviation, and movable sun shield. Choice of easily adjustable br... More Details
My Wishlist
Compare

Angler Compass- Surface Mt - Ra-93 - 128-Ra93F1

Ritchie Navigation, Navigation & Signaling
$197.19
100% repairable. Features a 2-3/4" direct-reading blue dial, internal green night lighting, built-in compensators to easily adjust for deviation, and movable sun shield. Choice of easily adjustable br... More Details
You can easily secure your bow-mount trolling motor to prevent damage in transport or when boating at high speeds. Can be mounted anywhere in the boat and quickly positioned for securing the trolling ... More Details
These ball and socket mounts will not come down or drop like other brands and will allow full swivel of 360° at either the top or the bottom. They are ideal for mounting even the heaviest fish finders... More Details
For optimum fishing performance, gives you a 360° full hemisphere of possible positions. The mounting base on all models can be easily removed from the unit for storage. The permanent mount and clamp ... More Details
For optimum fishing performance, gives you a 360° full hemisphere of possible positions. The mounting base on all models can be easily removed from the unit for storage. The permanent mount and clamp ... More Details
Page 61 of 588
MarineWrap Products
Our products are shipped from Canada & USA
Parts Warehouse:
Toronto, Ontario
Vancouver, BC
New Jersey, USA
Florida, USA

Head Office:
Kingston, Ontario
  •    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Phone: Contact Us

About Us

MarineWrap is a Canadian supplier of premium marine and RV parts and accessories from top industry brands. We focus on quality, accurate listings, and dependable fulfillment so you can maintain, repair, and outfit your boat or RV with confidence.

Our goal is simple: get you the right parts, shipped fast, with straightforward service you can count on.