Designed for the Canadian Climate
Free delivery within our service area (Kingston, Brockville, Ottawa, and in between) For Marine Shrink Wrap Products
Results 51501 - 51600 of 58739
Grid
My Wishlist
Compare

T-H Marine Rigging Flange For 2" Id Hose - Rf1Dp - 232-Rf1Dpf1

T-H Marine, Hoses, Clamps & Fittings
$38.49
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The fla... More Details
My Wishlist
Compare

T-H Marine Rigging Flange For 2" Id Hose - Rf2Dp - 232-Rf2Dpf1

T-H Marine, Hoses, Clamps & Fittings
$33.29
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The fla... More Details
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose. Part #:232-RFFHP1DPManufacturer:T-H MARINEManufacturer Part #:RFFHP1DPUPC... More Details
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose. Part #:232-RFHU1DPManufacturer:T-H MARINEManufacturer Part #:RFHU1DPUPC:7... More Details
My Wishlist
Compare

T-H Marine Rigging Hose 2" X 50' - Rfh1Dp - 232-Rfh1Dpf1

T-H Marine, Hoses, Clamps & Fittings
$491.99
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The fla... More Details
My Wishlist
Compare

T-H Marine Rigging Hose 2" X 50' - Rfh2Dp - 232-Rfh2Dpf1

T-H Marine, Hoses, Clamps & Fittings
$426.99
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The fla... More Details
My Wishlist
Compare

T-H Marine Rigging Hose 2" X 50' - Rfh3Dp - 232-Rfh3Dpf1

T-H Marine, Hoses, Clamps & Fittings
$426.99
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The fla... More Details
Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No ... More Details
My Wishlist
Compare

T-H Marine Rod Tamer Rod Straps - Rt14Dp - 232-Rt14Dpf1

T-H Marine, Lines & Rigging
$20.49
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade... More Details
My Wishlist
Compare

T-H Marine Rod Tamer Rod Straps - Rt18Dp - 232-Rt18Dpf1

T-H Marine, Lines & Rigging
$28.29
Deck MountMolded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Will not get hung up on fish hooks, lose their hold when wet, or fade... More Details
Strap is molded of black poly material that mounts on the gunnel and stretches to hook to a loop mounted on the deck. Installs very easily in a 3/4" diameter hole with the black stainless steel screws... More Details
Meets all requirements for emergency stop switches Strong coiled lanyardIsolated circuits on dual units to prevent feedbackMounts anywhere - requires 1-1/2" hole Part #:232-KS1DPManufacturer:T-H MARIN... More Details
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material. Part #:232-SDP3FWDPManufacturer:T-H MARINE... More Details
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material. Part #:232-SDP1DPManufacturer:T-H MARINEMa... More Details
Screw down deck plates are an inexpensive alternative to screw-out deck plates. They have a matte finish and are made from strong, super tough poly material. Part #:232-SDP2DPManufacturer:T-H MARINEMa... More Details
Includes top screen Threaded sealUnscrew half way to expose drain holes Part #:232-ODT112GSTWManufacturer:T-H MARINEManufacturer Part #:ODT112GSTWUPC:733572068757Order In Multiples Of:1DescriptionOver... More Details
T-H Marine Shark Eye Nav Lights 1NM (Pair) Meets ABYC A-16 & USGC 1 NMNMMA type acceptedStainless steel baseTin wirePair: (1) Red, (1) Green Part #:232-SEL1DPManufacturer:T-H MARINEManufacturer Part #... More Details
Locks hydraulic steering when traileringFits most steering cylinder rods on outboard enginesSnaps over outboards hydraulic steering cylinder rodsHelps keep engine centered during transportProtects ste... More Details
My Wishlist
Compare

T-H Marine Stainless Steel Cup Holder - Lch1Ssdp - 232-Lch1Ssdpf1

T-H Marine, Hoses, Clamps & Fittings
$34.59
Top quality stainless steel. Fits most existing cup holes. Drain fits 3/8" hose. Part #:232-LCH1SSDPManufacturer:T-H MARINEManufacturer Part #:LCH1SSDPUPC:733572060508Order In Multiples Of:1Size4"Hole... More Details
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base. Part #:232-AS1DPManufacturer:T-H MARINEManufacturer Part #:AS1DPUPC:733572017304Order In Multiples Of:1FitsAerator... More Details
Protects pumps from debris or bait fish. Formed wire mesh - molded PVC threaded base. Part #:232-AS2DPManufacturer:T-H MARINEManufacturer Part #:AS2DPUPC:733572017403Order In Multiples Of:1FitsTH-1, 1... More Details
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose Part #:232-TH1202XLDPManufacturer:T-H MARINEManufacturer Part #:TH1202XLDPUPC:733572030556Order In Multiples Of:1A1-7/... More Details
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose Part #:232-TH752XLDPManufacturer:T-H MARINEManufacturer Part #:TH752XLDPUPC:733572030150Order In Multiples Of:1A1/3/20... More Details
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose Part #:232-TH1202DPManufacturer:T-H MARINEManufacturer Part #:TH1202DPUPC:733572030501Order In Multiples Of:1A1-7/8"B3... More Details
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose Part #:232-TH1502DPManufacturer:T-H MARINEManufacturer Part #:TH1502DPUPC:733572031102Order In Multiples Of:1A2-7/8"B3... More Details
My Wishlist
Compare

T-H Marine Sure-Seal Deck Plate 6", Sand Shell - Dps63Dp - 232-Dps63Dpf1

T-H Marine, Seals, Gaskets & Service Kits
$39.39
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening. Par... More Details
My Wishlist
Compare

T-H Marine Sure-Seal Deck Plate 8" - Dps81Dp - 232-Dps81Dpf1

T-H Marine, Seals, Gaskets & Service Kits
$69.99
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening. Par... More Details
My Wishlist
Compare

T-H Marine Sure-Seal Deck Plate 8" - Dps82Dp - 232-Dps82Dpf1

T-H Marine, Seals, Gaskets & Service Kits
$59.49
Screw-Out StyleFeatures a fully overlapping lid and a positive 'O' ring seal insuring a watertight fit. No visible mounting fasteners. Total UV & chemical stability. No tools required for opening. Par... More Details
My Wishlist
Compare

T-H Marine Torque Tab - Tab1Dp - 232-Tab1Dpf1

T-H Marine, Miscellaneous
$51.49
Eliminates or reduces right hand steering torque caused by jacked-up transom heights and high pitched propellers. Inexpensive, simple to install and does not reduce speed. Cast aluminum construction c... More Details
Distributes the stress of the motor mounting boltsHigh quality cast aluminum 3/8" thickness Part #:232-TSP2DPManufacturer:T-H MARINEManufacturer Part #:TSP2DPUPC:733572020557Order In Multiples Of:1Des... More Details
Distributes the stress of the motor mounting boltsHigh quality cast aluminum 3/8" thickness Part #:232-TSP1DPManufacturer:T-H MARINEManufacturer Part #:TSP1DPUPC:733572020502Order In Multiples Of:1Des... More Details
My Wishlist
Compare

T-H Marine Trim Handle - Ejt1Dp - 232-Ejt1Dpf1

T-H Marine, Hinges, Latches & Locks
$116.69
Mounted directly to the throttle and shift lever for maximum safety and ease of operation. The switches are push button, weather proof and rated above what is required to operate a trim unit. Pre 1979... More Details
Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No ... More Details
Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to fac... More Details
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other us... More Details
Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other us... More Details
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished Loo... More Details
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above Wate... More Details
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above Wate... More Details
Extreme Output LED Underwater Light - Surface Mount 20% Brighter than Our Standard LED Underwater Light3.5"x1.5"High Impact Polymer ConstructionCompletely Waterproof - For Use Underwater or Above Wate... More Details
This surface mount, stainless steel underwater light is highly attractive, with superior brightness and durable construction. Completely waterproof, this 316 stainless steel bezel light will last for ... More Details
Illuminated Cup Holder Provides Soft LED Lighting 15 Super Bright LEDsRobust UV Stable Molded HousingMounts in Standard 3-5/8" HoleCorrosion Resistant 316 Stainless Steel Rim for a Sleek, Finished Loo... More Details
Built with full 1/2" aluminum with an exclusive Z-Lock design for the ultimate in strength and virtually no side slippage or movement, this jack plate handles all V6 outboards up to 300hp. Easily adju... More Details
For solo watercraft launching. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk ... More Details
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hol... More Details
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hol... More Details
Six (6) High Intensity Super Bright LEDs Newest Generation in LED TechnologyStainless Steel Bezel for Beauty and DurabilitySurface Mount Installation - No Large HolesResists Rust and Corrosion3/8" Hol... More Details
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water Part #:232-LED51900DPManufacturer:T-H MARINEManufacturer Part #:LED-51900-DPUPC:733572080308Order I... More Details
316 Stainless Steel Bezel Six Bright LEDs - Lights Up TransomsNo High Heat - Can Be Used Above Water Part #:232-LED51901DPManufacturer:T-H MARINEManufacturer Part #:LED-51901-DPUPC:733572080353Order I... More Details
My Wishlist
Compare

T-Jack W/Lightsblk4000 Bell Rv Rvx - 38-944014 - 388-38944014F1

Ultra-Fab, Lighting & 12V Accessories
$571.99
Part #:388-38944014Manufacturer:ULTRA-FABManufacturer Part #:38-944014UPC:649119440149Order In Multiples Of:1Volts12Travel18"ColorBlackCapacity4000 lbs.Voltage12 Variations More Details
My Wishlist
Compare

T-One Connector Repl. 119146 - 119147 - 220-119147F1

Fulton/Wesbar (Cequent), Wiring & Connectors
$112.09
Draws power directly from the vehicle battery and uses less than 5 mA of the vehicle circuit for sensing to turn the trailer functions on and off Will work with either LED/Incandescent bulbs (vehicle ... More Details
My Wishlist
Compare

T-One T-Connector Harness 4 Way Flat - 118847 - 220-118847F1

Fulton/Wesbar (Cequent), Wiring & Connectors
$175.59
Part #:220-118847Manufacturer:FULTON/WESBAR (CEQUENT)Manufacturer Part #:118847UPC:016118162110Order In Multiples Of:1ApplicationJeep Grand Cherokee, All 2022-2023, Jeep Grand Cherokee L, All 2021-202... More Details
Part #:109-MC2963588Manufacturer:BARR MARINEManufacturer Part #:MC-29-63588Order In Multiples Of:1DescriptionLower thermostat housingApplicationModels 188, 215, 225, 233, 255 and 888 Inboard and I/O U... More Details
Part #:951-9600023355Manufacturer:DOMETIC RVManufacturer Part #:9600023355UPC:713814321147Order In Multiples Of:1ApplicationCool/Furnace/Heat Strip/Heat PumpDescriptionTstat OnlyColorWhiteTypeCool/Fur... More Details
Part #:17-10423Manufacturer:CAMCO RVManufacturer Part #:10423UPC:014717104234Order In Multiples Of:1Description1/2" Valve w/4" probe Variations17-10471Camco Temperature and Pressure Relief 3/4" Valve ... More Details
Part #:452-69062Manufacturer:TRAC OUTDOORManufacturer Part #:69062UPC:666996102625Order In Multiples Of:1TypeIntegrated Davit Variations452-T10262T10262 DELTA DAVIT-BIG WATER I More Details
My Wishlist
Compare

Table Base 2 7/8 Anod - 3660107 - 169-3660107F1

Springfield Marine, Rails, Ladders & Seating
$143.54
My Wishlist
Compare

Table Swivel 2-7/8 Anod - 3660207 - 169-3660207F1

Springfield Marine, Rails, Ladders & Seating
$147.89
My Wishlist
Compare

Tablecloth Asst Colors Bell Rv Rvx - 7920 - 147-7920F1

Coghlans (Us Only), Miscellaneous
$10.59
Part #:147-7920Manufacturer:COGHLANS (US ONLY)Manufacturer Part #:7920UPC:056389079205Order In Multiples Of:1Size54" x 72" Variations More Details
My Wishlist
Compare

Tablet Holders Works With All Tablets - 149 - 736-0149F1

Scotty Downriggers, Rails, Ladders & Seating
$101.99
My Wishlist
Compare

Tach/Spd Kt 80Wht - 8M0135634 - 710-79-8M0135634F1

Mercury/Quicksilver, Gauges & Sensors
$578.21
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers Part #:236-A500272TAL12DManufacturer:TACO METALSManufacturer Part #:A50-0272TAL12DUPC:6... More Details
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers Part #:236-A500275TAL12DManufacturer:TACO METALSManufacturer Part #:A50-0275TAL12DUPC:6... More Details
For hatchcovers. Polished, clear anodized aluminum finish. Part #:236-A500304TAL12Manufacturer:TACO METALSManufacturer Part #:A50-0304TAL12UPC:630838000462Order In Multiples Of:1Size3/4" H x 1-1/8" W ... More Details
Lightweight for tight radius bending 6000 series prime grade aluminum alloyDrilled and countersunk on 6" centers Part #:236-A500326TAL12DManufacturer:TACO METALSManufacturer Part #:A50-0326TAL12DUPC:6... More Details
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish. Part #:236-A510102TAL12DManufacturer:TACO METALSManufacture... More Details
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish. Part #:236-A510104TAL12DAManufacturer:TACO METALSManufactur... More Details
For interior and exterior use. Models with a "D" suffix are drilled and countersunk on 6" centers. Polished, clear anodized aluminum finish. Part #:236-A510106TAL12DManufacturer:TACO METALSManufacture... More Details
Drilled and countersunk on 6" centers 6000 series prime grade aluminum alloy Part #:236-A510149TAL12DManufacturer:TACO METALSManufacturer Part #:A51-0149TAL12DUPC:630838000684Order In Multiples Of:1Si... More Details
Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to protect against the harsh marine environment. Models with... More Details
Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to protect against the harsh marine environment. Models with... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windsh... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windsh... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Delrin insert provides smooth, rattle-free canvas top operation. Can also fit windsh... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides r... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides r... More Details
High quality, marine grade Type-316L stainless steel with polished finish for strength and long lasting durability. Patented ball and socket pivot design offers full rotation. Delrin insert provides r... More Details
If you rig your halyard lines to the gunnel of your boat, the Outrigger Line Tensioner is what you've been waiting for. Its sleek, stainless-steel, mushroom design allows halyard pulley blocks to be l... More Details
Large end caps for Suproflex Rub Rail. Part #:236-F160276Manufacturer:TACO METALSManufacturer Part #:F16-0276UPC:631015090115Order In Multiples Of:1DescriptionEnd CapColorStainlessSizeLg Variations236... More Details
For use with TACO Come On Board Handle. Manufactured from Type-304 stainless steelCast design with a 3" Dia. surfaceFits 1-1/2" Dia. handlesTapped for 1/4" hardware (not included)Matching backing plat... More Details
Brushed anodized aluminum Mounts to transom - maximize rod storageAdjust rack angle to fit any boat's transomEasy bolt-on installation Part #:236-F313504BSA1Manufacturer:TACO METALSManufacturer Part #... More Details
Sleek, low-profile lights designed to allow for cleaner, open decks with unobstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sa... More Details
Designed specifically for SuproFlex. This sleek, low-profile navigation light fits V11-9960, V11-9990 and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and pow... More Details
A center rigger mount designed for longer outrigger poles and for the offshore performance requirements of the large center console boats on the market today that are equipped with triple and quad eng... More Details
Ideal for boats 25' to 40'Constructed from stainless steel and aluminum (No plastic components)Arm lifts up to 46.5° from horizontal position for kite fishing and dock clearancePairs with 1-1/2" DIA O... More Details
This base is perfect for the bigger, faster center console boats between 25' and 40'. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. I... More Details
Ideal for boats 25' - 50' with hardtops up to 4-1/2" thick. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 50'Sa... More Details
My Wishlist
Compare

Taco Gs500 Pro Series Mount, 1 Pr. - Gs-500 - 236-Gs500F1

Taco Metals, Miscellaneous
$5,792.59
the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features patent-pending Twist & Lock pole connection. Eliminates the need for... More Details
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the t... More Details
Designed with safety and innovation in mind, boaters can adjust the position of their antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with ... More Details
Polished stainless-steel body with a mirrored finishSmooth lift and descentStandard 1"-14 thread (male) shaft accommodates standard VHF antennas up to 8'No under-mount clearance neededHigh-torque, ant... More Details
With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the... More Details
Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cu... More Details
The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire... More Details
Quality components to upgrade and repair outrigger rigging. Part #:236-COK0001B2Manufacturer:TACO METALSManufacturer Part #:COK-0001B-2UPC:630838085049Order In Multiples Of:1DescriptionStandard Outrig... More Details
Quality components to upgrade and repair outrigger rigging. Part #:236-COK0001T2Manufacturer:TACO METALSManufacturer Part #:COK-0001T-2UPC:630838085056Order In Multiples Of:1DescriptionPremium Outrigg... More Details
Quality components to upgrade and repair outrigger rigging. Part #:236-COK00182Manufacturer:TACO METALSManufacturer Part #:COK-0018-2UPC:630838085063Order In Multiples Of:1DescriptionCork Outrigger Li... More Details
Page 516 of 588
MarineWrap Products
Our products are shipped from Canada & USA
Parts Warehouse:
Toronto, Ontario
Vancouver, BC
New Jersey, USA
Florida, USA

Head Office:
Kingston, Ontario
  •    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Phone: Contact Us

About Us

MarineWrap is a Canadian supplier of premium marine and RV parts and accessories from top industry brands. We focus on quality, accurate listings, and dependable fulfillment so you can maintain, repair, and outfit your boat or RV with confidence.

Our goal is simple: get you the right parts, shipped fast, with straightforward service you can count on.