Select Category

West System 105C Resin - 4.35 Gallon - 105-C - 655-105Cf1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System 105E Resin - 52.03 Gallon - 105-E - 655-105Ef1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System 205 Hardener, .44 Pint - 205A - 655-205Af1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System 205 Hardener, .86 Quart - 205B - 655-205Bf1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System 205 Hardener, .94 Gallon - 205C - 655-205Cf1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System 205 Hardener, 11.31 Gallon - 205-E - 655-205Ef1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System 207Sa Special Clear Hardener, .66 Pint - 207-Sa - 655-207Saf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System 207Sb Special Clear Hardener, .33 Gallon - 207-Sb - 655-207Sbf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System 207Sc Special Clear Hardener, 1.45 Gallon - 207-Sc - 655-207Scf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System 207Se Special Clear Hardener, 65.64 L (17.34 Gallon) - 207-Se - 655-207Sef1

Use with 105 resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with #300 pumps.

West System 209Sa Extra Slow Hardener, .66 Pint - 209-Sa - 655-209Saf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System 209Sb Extra Slow Hardener, .33 Gallon - 209Sb - 655-209Sbf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System 209Sc Extra Slow Hardener, 1.45 Gallon - 209-Sc - 655-209Scf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System 30625 Large Capacity 306 Metering Pump, 5:1 Ratio - 30625 - 655-30625F1

For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.

West System 40328 Microfibers, Off-White, 20 Oz., 12/Case - 403-28 - 655-40328F1

A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.

West System 4039 Microfibers, Off-White, 6 Oz., 24/Case - 403-9 - 655-4039F1

A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.

West System 403B Microfibers, Off-White, 20 Lb. - 403-B - 655-403Bf1

A fine fiber blend used as a thickening additive that builds volume quickly and blends easily to create a multi-purpose adhesive especially for bonding wood. Epoxy thickened with microfibers has good gap filling qualities while retaining excellent wetting/penetrating capability. Cures to an Off-White color.

West System 729 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - 729 - 655-729F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 72910 9 Oz. Glass Reinforcing Tape, 2" X 10', 15/Case - 729-10 - 655-72910F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 729W 9 Oz. Glass Reinforcing Tape, 2" X 50 Yds., 6/Case - C-729 - 655-729Wf1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 731 9 Oz. Glass Reinforcing Tape, 3" X 50 Yds., 4/Case - 731 - 655-731F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 732 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - 732 - 655-732F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 73210 9 Oz. Glass Reinforcing Tape, 4" X 10', 10/Case - 732-10 - 655-73210F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 732W 9 Oz. Glass Reinforcing Tape, 4" X 10', 3/Case - C-732 - 655-732Wf1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 733 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - 733 - 655-733F1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 733W 9 Oz. Glass Reinforcing Tape, 6" X 10', 2/Case - C-733 - 655-733Wf1

Versatile, 9 oz. cloth tape which is ideal for reinforcing chines, hull-deck corners and similar structural applications. When tape is bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and added abrasion resistance.

West System 802 Heavy-Duty Roller Pan, 12/Case - 802 - 655-802F1

An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.

West System 802W Heavy-Duty Roller Pan, 12/Case - C-802 - 655-802Wf1

An inexpensive, flexible plastic pan. Epoxy can be popped out after curing. Eliminates need for liners.

West System 805 Poly Mixing Pot, 16 Oz., 240/Case - 805 - 655-805F1

Strong and reusable. Cured epoxy easily pops out.

West System 806 Poly Mixing Pot, 32 Oz., 180/Case - 806 - 655-806F1

Strong and reusable. Cured epoxy easily pops out.

West System 809 Notched Spreader, 36/Case - 809 - 655-809F1

Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".

West System 88220 Vacuum Bagging Film - 882-20 - 655-88220F1

Clear, heat-stabilized, modified nylon resin film. Can be used at temperatures up to 350°F (176°C) for typical composite cure cycle times. A tough, stretchable film for high vacuum pressures.

West System 885 Vacuum Bagging Kit - 885 - 655-885F1

A complete starter kit for repairs and small laminating projects up to 13 sq. ft. Kit includes: Venturi vacuum generator1/4" I.D. Vacuum Tubing (10')Vacuum Gauge (1)Junction "T" barbs (2)Release Fabric (15 sq. ft.)Breather Fabric (15 sq. ft.)Vacuum Bag Film (15 sq. ft.)Vacuum Bag Sealant (25')Complete kit instructions002-150 Vacuum Bagging Techniques002-150 Vacuum Bagging Techniques

West System C105A Resin - 946 Ml (32 Oz.) - C-105-A - 655-C105Af1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System C105B Resin - 3.74 L (.98 Gal) - C-105-B - 655-C105Bf1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System C105C Resin - 16.46 L (4.35 Gal) - C-105-C - 655-C105Cf1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System C105E Resin - 197 L (52.03 Gal) - C-105-E - 655-C105Ef1

Clear, light amber, low viscosity liquid. Specifically designed to wet out and bond with wood fiber, fiberglass and some metals. Self-leveling with roller applications. Cures in wide temperature range and can be sanded or shaped afterwards. Relatively high flash point. Excellent adhesive when mixed with filler to reduce sag. Viscosity is approximately 1000 CP at 70° F. Use with 300 Mini Pump for accurate dispensing.

West System C205 Hardener, 208 Ml (7 Oz.) - C-205-A - 655-C205Af1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System C205 Hardener, 3.56 L (.94 Gal) - C-205-C - 655-C205Cf1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System C205 Hardener, 42.81 L (11.31 Gal) - C-205-E - 655-C205Ef1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System C205 Hardener, 814 Ml (27.5 Oz.) - C-205-B - 655-C205Bf1

Produces rapid cure. Use with 105 Resin, 5:1 for rigid, high strength, moisture resistant solid. Pot life of 9 to 12 minutes at 72° F. Use with 300 Mini Pumps.

West System C207Sa Special Clear Hardener, 315 Ml (10.6 Oz.) - C-207-Sa - 655-C207Saf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System C207Sb Special Clear Hardener, 1.24 L (42.2Oz.) - C-207-Sb - 655-C207Sbf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System C207Sc Special Clear Hardener, 5.49 L (1.4 Gallon) - C-207-Sc - 655-C207Scf1

Use with 105 Resin in coating applications where extremely clear finish is desired, especially when working in humid conditions. Provides excellent adhesion for bonding applications. Contains UV-stabilization additive but still requires long-term UV protection with quality marine paint or varnish. Provides 20-26 minutes of pot life at 70°F and will cure to a solid state in 10-15 hours. Further hardening occurs over 4-7 days. Use with 300 Mini Pump set.

West System C209Sa Extra Slow Hardener, 315 Ml (10.6 Oz.) - C-209-Sa - 655-C209Saf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System C209Sb Extra Slow Hardener, 1.24 L (42.2Oz.) - C-209-Sb - 655-C209Sbf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System C209Sc Extra Slow Hardener, 5.3 L (1.4 Gallon) - C-209-Sc - 655-C209Scf1

Use with 105 Resin in extremely warm and/or humid conditions for general bonding and coating applications, providing approximately twice the pot life and working time as 206 Slow Hardener. Provides adequate pot life up to 110° F and 70° F when additional pot life and assembly time may be desired. Provides 15-20 minutes of pot life at 95° F and 50-60 minutes at 70° F. Will cure to a solid state in 6-8 hours at 95° F and 20-24 hours at 70° F. Further curing occurs over the next 4-9 days. Forms a clear, amber-colored solid. 3:1. Use with 300 Mini pump.

West System G/Flex 65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - 65032 - 655-65032F1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex C65032 Epoxy, 32 Oz. (2Ea 16 Oz. Bottles) - C-650-32 - 655-C65032F1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - 6502G - 655-6502Gf1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex Epoxy 2 Gallon Kit (2Ea Gal. Cans) - C-650-2G - 655-C6502Gf1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - 650-8 - 655-6508F1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex Epoxy Bottles, 8 Oz. (2Ea 4 Oz. Bottles) - C-650-8 - 655-C6508F1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.

West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - 650-K - 655-650Kf1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs.650-K G/Flex Aluminum Repair Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.

West System G/Flex Epoxy Kit, 4 Oz. (2Ea 4 Oz. Bottles) - C-650-K - 655-C650Kf1

A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM® fillers and additives, and used to wet-out fiberglass tapes and fabrics. 2-part epoxy with a 1-to-1 mix ratio, gives you 45 minutes of working time at room temperature. It reaches an initial cure in 7 to 10 hrs. and full cure in 24 hrs. 650-K G/Flex Aluminum Kit: Contains 4 fl. oz. G/Flex 650 resin, 4 fl. oz. G/Flex 650 hardener (8 fl. oz. mixed epoxy), 2 reusable mixing stick/applicators, 2 12-cc syringes, 4 grams adhesive filler, 4 mixing cups, 1pair disposable neoprene gloves, 4 alcohol cleaning pans and complete handling and repair instructions.

West System User Manual - 2950 - 655-002950F1

The latest up-to-date information on WEST SYSTEM products. Covers epoxy resin, hardeners, additives, reinforcing materials, tools and supplies.

Westchester B21041M Disposable Nitrile Gloves, Medium, Blue, 100/Pk - B21041-M - 280-B21041Mf1

4 Mil nitrile disposable gloves are extra tough and perfect for persons with latex allergies. Textured grip is great for working with oils and solvents. The ideal choice for mechanics, or any industrial application.

Westchester B21051L Disposable Nitrile Gloves, Large, Black, 100/Pk - B21051-L - 280-B21051Lf1

4 Mil nitrile disposable gloves are extra tough and perfect for persons with latex allergies. Textured grip is great for working with oils and solvents. The ideal choice for mechanics, or any industrial application.Black color hides grease and grime.

Westchester B21051M Disposable Nitrile Gloves, Medium, Black, 100/Pk - B21051-M - 280-B21051Mf1

4 Mil nitrile disposable gloves are extra tough and perfect for persons with latex allergies. Textured grip is great for working with oils and solvents. The ideal choice for mechanics, or any industrial application.Black color hides grease and grime.

Westerbeke Alternator - 86050 - 57-86050F1

12 volt - 50 amp Internal regulatorSingle groove pully included

Westerbeke Thermostat - 23-3600 - 47-233600F1

Westerbeke Thermostat Fits with 3.0 WMD(60Hz)/2.4 WMD(50Hz), 4.4 BCD(60Hz), 4.4 WMD(60Hz)/ 3.3 WMD(50Hz), 7.7 WMD(60Hz)/5.8 WMD(50Hz), 8.0 BTD(60Hz)/ 6.0 BTD(50Hz), 8.0 BTDA(60Hz)/6.0 BTDA(50Hz), 8.0 WMD(60Hz)/ 6.0 WMD(50Hz), 10.0 BTD(60Hz)/7.5 BTD(50Hz), 10.0 BTDA(60Hz)/ 7.5 BTDA(50Hz), 11.0 BTD(60Hz)/8.3 BTD(50Hz), 11.0 WMD(60Hz)/ 8.3 WMD(50Hz), 12.5 BTD(60Hz)/9.4 BTD(50Hz), 12.5 BTDA(60Hz)/ 9.4 BTDA(50Hz), 12.5 BTDB(60Hz)/9.4 BTDB(50Hz), 12.5 WMD(60Hz)/ 9.4 WMD(50Hz), 12.6 BTD(60Hz)/10.4 BTD(50Hz), 15.0 BTD(60Hz)/ 12.0 BTD(50Hz), 15.0 BTDC(60Hz)/12.0 BTDC(50Hz), 20.0 SBEG(60Hz)/ 16.0 SBEG(50Hz), 20.0 SBEGA(60Hz) / 16.0 SBEG(50Hz), 22.5 SBEG(60Hz)/ 18.7 SBEG(50Hz), 22.5 SBEGA(60Hz)/18.7 SBEGA(50Hz)

Westerbeke Thermostat - 23-3605 - 47-233605F1

Westerbeke Thermostat Fits with 8.0 SBEG(60Hz)/6.4 SBEG(50Hz), 10.0 SBEG(60Hz)/ 8.0 SBEG(50Hz), 12.5 SBEG(60Hz)/ 10.0 SBEG(50Hz), 14.0 SBEG(60Hz)/ 11.6 SBEG(50Hz), 15.0 BTDA(60Hz)/ 12.0 BTDA(50Hz), 15.0 BTDB(60Hz)/ 12.0 BTDB(50Hz), 20.0 BED(60Hz)/ 16.0 BED(50Hz), 20.0 BEDA(60Hz)/ 16.0 BEDA(50Hz), 20.0 WTA (60Hz)/ 16.0WTA(50Hz), 25.0 BED(60Hz)/20.0 BED(50Hz)

Wet Ex Extraflex 1-1/2 12-1/2 Wet Exhaust/Water Hose Blk - 252F-1124 - 606-252F1124F1

Wet Ex Extraflex 1-1/2 50' Wet Exhaust/Water Hose, Black 250F, Sae J2006-R2, Lloyd'S - 252F-1126 - 606-252F1126F1

Wet Ex Extraflex 1-3/4 12-1/2 Wet Exhaust/Water Hose Blk - 252F-1344 - 606-252F1344F1

Wet Ex Extraflex 1-5/8 12-1/2 Wet Exhaust/Water Hose Blk - 252F-1584 - 606-252F1584F1

Wet Ex Extraflex 1-7/8 12-1/2 Wet Exhaust/Water Hose Blk - 252F-1784 - 606-252F1784F1

Wet Ex Extraflex 2 50' Wet Exhaust/Water Hose, Black 250F, Sae J2006-R2, Lloyd'S - 252F-2006 - 606-252F2006F1

Wet Ex Extraflex 2-1/2 12-1/2 Wet Exhaust/Water Hose Blk - 252F-2124 - 606-252F2124F1

Wet Ex Extraflex 3 12-1/2 Wet Exhaust/Water Hose Blk - 252F-3004 - 606-252F3004F1

Wet Ex Extraflex 3-1/2 12-1/2 Wet Exhaust/Water Hose Blk - 252F-3124 - 606-252F3124F1

Wet Ex Extraflex 4 12-1/2 Wet Exhaust/Water Hose Blk - 252F-4004 - 606-252F4004F1

Wet Ex Extraflex 4 6-1/4 Wet Exhaust/Water Hose Blk - 252F-4001 - 606-252F4001F1

Wet Ex Extraflex 5 12-1/2 Wet Exhaust/Water Hose Blk - 252F-5004 - 606-252F5004F1

Wet Ex Extraflex 5 6-1/4 Wet Exhaust/Water Hose Blk - 252F-5001 - 606-252F5001F1

Wet Ex Extraflex 6 12-1/2 Wet Exhaust/Water Hose Blk - 252F-6004 - 606-252F6004F1

Wet Ex Extraflex 6 6-1/4 Wet Exhaust/Water Hose Blk - 252F-6001 - 606-252F6001F1

Wet Ex Extraflex 8 12-1/2 Wet Exhaust/Water Hose Blk - 252F-8004 - 606-252F8004F1

Wet Ex Extraflex 8 6-1/4 Wet Exhaust/Water Hose Blk - 252F-8001 - 606-252F8001F1

Wet Exextraflex 2 12-1/2 Wet Exhaust/Water Hose Blk - 252F-2004 - 606-252F2004F1

Wet Or Dry™ Tri-M-Ite Paper Sheets, 100C - 051144-02017 - 71-02017F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 120C - 051144-02016 - 71-02016F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 150C - 051144-02015 - 71-02015F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 180C - 051144-02014 - 71-02014F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 220A - 2007 - 71-02007F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 320A - 2004 - 71-02004F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 400A - 2002 - 71-02002F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 600A - 2000 - 71-02000F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 60C @50 - 051141-24001 - 71-24001F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wet Or Dry™ Tri-M-Ite Paper Sheets, 80C - 051144-02018 - 71-02018F1

To be used wet or dry for sanding old finishes, fine feather edging plus surface work. Silicon carbide, closed coat product bonded with a waterproof resin. Note: 24001 is sold in packs of 50 only.

Wfco 8900 Series 600W 35A Rv Battery Charger Power Center - Wf-8935-Ad - 715-Wf8935Adf1

Exclusive to WFCO Converters, Power Centers, and MBAs feature new Patent Pending technology that will DETECT Lead Acid or Lithium Ion batteries and AUTOMATICALLY change the charging profile based on the battery. RV owners will no longer need to change out an entire converter or operate a manual switch to properly charge batteries.The WF-8900 Series has revolutionized RV power centers with its lighter weight, decorative doors and superior features. This series provides a clean, constant 13.6 volts DC nominal output range for reliable operation of electronics and appliances. Automatic three-stage charging extends the life of your battery, with output voltage modes of 13.2 volts DC range "float" mode, 13.6 volts DC range "absorption" mode, and a 14.4 volts DC range "bulk" mode. The 8900 Series is designed to offer quiet operation as the cooling fan runs only when needed. FCC Class B compliance for every power center model helps eliminate interference with televisions, radios or other signals. Electronic current limiting automatically shuts down power during overload or short-circuit conditions, protecting the life of your power center and electrical system. WF-8900 Series models provide AC/DC distribution with innovative features. They can accommodate a 30-amp main AC circuit breaker and up to five branch circuits. Eleven branch DC circuits are available with LED bulbs for each DC circuit, to illuminate and identify open circuits. Outer dimensions: 13.875"W x 11.625"H, 9"DRough opening:12.25" x 11" x 7.375"Lead Acid and LiFEPO4 compatibleOptimized charging profile based on battery chemistryInnovative processor system charges based on the need of the batteryContinuous monitoring provides superior performance and battery maintenance

Wfco T-57R 50 Amp Rv Shorepower & Generator Transfer Switch W/Plastic Case - T-57-R - 715-T57Rf1

Provides trouble-free changeover of power between shore power and generator. It can be used for 30-amp or 50-amp AC service. Mounts easily onto a flat surface and is engineered for safe, reliable performance. The unit's DC coil prevents AC "chatter" noise and drop-out in low-voltage conditions. Accidental coupling of power from or to shore line and generator is prevented by a "break before make" configuration. Input : 105-130 VAC, 60 Hz, 30-amp or 50-amp serviceDimensions : 8.1"W x 10.1"H x 5.5"DWeight : 10 lbs.

Wfco T30 30 Amp Transfer Switch - T-30 - 715-T30F1

Provides trouble-free changeover of power between shore power and generator. It is engineered for safe, reliable performance, and the unit's DC coiled relay prevents AC 'Chatter' noise and drop-out in low-voltage conditions. Accidental coupling of power to or from the shore line and generator is prevented by a 'break before make' configuration. T30 can be installed onto the back of WFCO 8900 Series Power Centers. Input : 120 VAC, 60 HzDimensions : 5"W x 5.625"H x 5"DWeight : 4.25 lbs

Wfco T30Wm 30 Amp Transfer Switch - T-30-Wm - 715-T30Wmf1

Provides trouble-free changeover of power between shore power and generator. It is engineered for safe, reliable performance, and the unit's DC coiled relay prevents AC 'Chatter' noise and drop-out in low-voltage conditions. Accidental coupling of power to or from the shore line and generator is prevented by a 'break before make' configuration. T30WM can be mounted on any vertical or horizontal surface. Input : 120 VAC, 60 HzDimensions : 5"W x 5.625"H x 5"DWeight : 4.25 lbs

Wfco Wf-8910Pec-Do Brown Flip Down Door For 8900 Series 45 Amp Rv Power Center - Wf-8910Pec-Do - 715-Wf8910Pecdof1

Plastic flip down door only for wf-8955pec-brown with window (5 7/8" h x 12" w).