Select Category
Attwood 935331 Softside Round Dock Fender, Slide-On Post, 7" X 15" - 93533-1 - 23-935331F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Double-molded eye ends for extra strength. Seamless one-piece construction. Sold in a PDQ display carton for easy retail displayGuaranteed for lifeMade in the U.S.A.
Attwood 935341 Softside Round Dock Fender, Corner, 7" X 15" - 93534-1 - 23-935341F1
Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing. Double-molded eye ends for extra strength. Seamless one-piece construction. Sold in a PDQ display carton for easy retail displayGuaranteed for lifeMade in the U.S.A.
Attwood 935361 Softside Pontoon Fender, White - 93536-1 - 23-935361F1
The SoftSide Pontoon Fender is uniquely shaped to provide protection from the edge of the boat deck to the widest point of the pontoon, minimizing contact damage to the boat and dock. The fender slips easily underneath the deck edge and secures between it and the top of the pontoon. Included side-loop strap can be used to mount fender more securely, but is not required. Fender rests securely between boat deck edge and pontoonIncluded mounting strap helps provide secure fitLifetime guarantee against chalking, splitting, marring, deflating and crushingUV-resistant
Attwood 935371 Softside Dock Fender, White, Sold Each, 4/Case - 93537-1 - 23-935371F1
Molded from light weight composite - soft to the touch, easy on hulls Lifetime guarantee against chalking, splitting and crushingNo leaking air valvesSimple installation on wood and aluminum docks
Attwood 98395Gy Low Back Fold Down Fishing Seat, Gray - 98395Gy - 23-98395Gyf1
This seat features a high impact plastic frame, aluminum hinges, UV resistant and easy to clean vinyl, standard seat hole mounting pattern. 7" W x 16" D x 16" HABYC: B
Attwood 98505Ca Casting Seat, Camo - 98505Ca - 23-98505Caf1
Ergonomic foam paddingDurable high impact plastic base (no wood)Fits all standard seat mountsSize: 11" L x 15" W x 6" H
Attwood 98505Wh Casting Seat, White - 98505Wh - 23-98505Whf1
Ergonomic foam paddingDurable high impact plastic base (no wood)Fits all standard seat mountsSize: 11" L x 15" W x 6" H
Attwood 99C0451S Vent Line Carbon Canister - 99Cc045-1S - 23-99Cc0451Sf1
99C0451S: Trailerable Vessel Capacity: 70 Gal. Non-Trailerable Vessel Capacity: 110 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Cc0851S Vent Line Carbon Canister - 99Cc085-1S - 23-99Cc0851Sf1
99CC0851S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Cc085Hsa1S Vent Line Carbon Canister - 99Cc085Hsa1S - 23-99Cc085Hsa1Sf1
99CC085HSA1S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. Fits 5/8" vent hoseCan be mounted in any orientation using brackets providedCompatible with Ethanol blended fuelsLow permeation shell reduces overall system emissionsCarbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation
Attwood 99Dfccas1S Angled Deck Fill For Carbon Canister Systems, Stainless Cap - 99Dfccas1S - 23-99Dfccas1Sf1
Dual 1 psi overpressure relief safety valves built into the capAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuels
Attwood 99Dfccss1S Straight Deck Fill For Carbon Canister Systems, Stainless Cap - 99Dfccss1S - 23-99Dfccss1Sf1
Dual 1 psi overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuels
Attwood 99Dfpvab1S Angled Gas Deck Fill For Pressure Release Systems, Black Plastic Cap - 99Dfpvab1S - 23-99Dfpvab1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvas1S Angled Gas Deck Fill For Pressure Release Systems, Stainless Cap - 99Dfpvas1S - 23-99Dfpvas1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvsb1S Straight Gas Deck Fill For Pressure Release Systems, Black Plastic Cap - 99Dfpvsb1S - 23-99Dfpvsb1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Dfpvss1S Straight Gas Deck Fill For Pressure Release Systems, Stainless Cap - 99Dfpvss1S - 23-99Dfpvss1Sf1
Dual 1 psi diurinal emission control overpressure relief safety valves Triple high-flow vacuum valves ensure maximum make-up air flow with minimum vacuum restrictionDesigned and tested to prevent water from entering the fuel systemAutomatic nozzle shutoff 4-18 gpmHinged audible click cap meets EPA requirementsISO 10088 and CE compliantMeets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standardsDesigned and tested to prevent water from entering the fuel systemCompatible with Ethanol blended fuelsFits 1-1/2" fill hose and 5/8" vent hose
Attwood 99Flb1001S Fill Limit Vent Valve With Grv Communication, 1.0" Shut-Off, Green - 99Flb100-1S - 23-99Flb1001Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood 99Flb1401S Fill Limit Vent Valve With Grv Communication, 1.4" Shut-Off, Grey - 99Flb140-1S - 23-99Flb1401Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood 99Flb3301S Fill Limit Vent Valve With Grv Communication, 3.3" Shut-Off, Black - 99Flb330-1S - 23-99Flb3301Sf1
Sets the full level of fuel in the tank Prevents liquid fuel from reaching the carbon canister or vent system during vessel operation, trailering and storageCompatible with Ethanol blended fuels and plastic and aluminum tanksPasses all USCG CFR 33 and ABYC H-24 fire test requirements and CARB and EPA requirementsIntegrated high-performance gasket includedAssembly Guide aligns the FLVV and gasket with tank for faster installation
Attwood Abs Plastic Rod Holder Black - 12701-5 - 23-127015F1
30° AngleDurable plastic construction. Fits: Rod grips under 1-1/2" diameter.Fasteners: #10
Attwood Acetal Connector 3/4"-14 Npsm To 3/4" I.D. Hose Fitting, White - 730181 - 23-38993F1
Threaded end fits 3888 drain fitting or A-Series aerator pump intakes and outlets. Acetal construction.
Attwood Adjustable Rod Holder With Bi-Axis Mount-Black - 1135631 - 23-50094F1
Features a superior ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting and spinning rods. Includes Bi-Axis mount. This design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns.
Attwood Adjustable Rod Holder With Bi-Axis Mount-White - 5009W4 - 23-5009W4F1
Features a superior ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting and spinning rods. Includes Bi-Axis mount. This design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns.
Attwood Aerator Remote Mounting Bracket 3/4" - 811630 - 23-41223F1
For mounting the aerator pump to a base, away from the transom.
Attwood Aerator Spray Head Adjustable - 812848 - 23-41257F1
Use on livewells that have built-in overflows or recirculating systems. Mounts on side of tank. 90° fitting for installation in tight spaces. Rotating head with O-ring adjusts and maintains flow setting. Removable head. Polypropylene construction. Maximum tank thickness: 5/8".
Attwood All Plastic Heavy Duty Battery Tray - 2628773 - 23-90975F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All Plastic Heavy Duty Battery Tray - 2629138 - 23-90985F1
All-plastic and heavy duty, these battery trays use an adjustable cross bar and posts to allow for universal fit of both short and tall battery styles. Contain no metal parts to corrode and no webbing straps to fadeErgonomic nuts and bolts easily secure batteries
Attwood All-Round Light With Folding Pole 54" - 5340-54-7 - 23-5340547F1
Two-mile, 360° visibility, for boats up to 39.4' (12 m) length. Since all-round lights must be at least one meter (39-3/8") above sidelights, some boats require a long light pole. The removable pole folds in half for easy stowage. 2-pin locking-collar pole. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood All-Round Pole Light With Fixed Base 8",Globe Style - 1177031 - 23-5122087F1
Two-mile, 360° light visibility for use on boats up to 39.4 ft. (12 meters). Fixed base for use on pontoons, hard tops, and radar arches. Aluminum pole. Base dimensions: 2-1/2" L x 1" W. Includes 9-watt wedge base lamp.
Attwood Aluminum Paddle 4', Camo - 11759-1 - 23-117591F1
Designed for the outdoorsman and hunter. Aluminum shaft. padded grips.
Attwood Angled Adjustable Reach Transom Saver 30-60" - 460-Adj - 148-460Adjf1
Adjusts from 30"-60". Unique angle adjustment (patent pending) from 0° - 36° in 12° increments. Locking feature prevents unintentional detachment. Fits most trailers. Heavy-duty molded rubber pads prevent scratching on the lower unit. Steel construction with corrosion resistant black finish on the tubes.
Attwood Articulating All-Round Pole Light, 42" - 5330-42-7 - 23-5330427F1
Two-mile, 360° visibility, for boats up to 39.4' (12 meter) in length. The articulating light simplifies installation. The 2-pin locking-collar pole allows installation in 95% of existing bases (Attwood & competitors). Articulating head adjusts 15° fore or aft to fit all base angles. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood Articulating All-Round Pole Light, 48" - 5330-48-7 - 23-5330487F1
Two-mile, 360° visibility, for boats up to 39.4' (12 meter) in length. The articulating light simplifies installation. The 2-pin locking-collar pole allows installation in 95% of existing bases (Attwood & competitors). Articulating head adjusts 15° fore or aft to fit all base angles. 9-watt wedge-base lamp. Anti-glare lens focus at the horizon and above, not in the driver's eyes.
Attwood Battery Box Strap Only Black Woven Polypropylene 54" - 9014A3 - 23-9014A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Selector Switch 4 Way - 14230-3 - 23-142303F1
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allows switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off.
Attwood Battery Strap Kit 38" Fits 90651 And 90671 - 2598031 - 23-90133F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Strap Kit 54" Fits 9084 - 9013A3 - 23-9013A3F1
Woven polypropylene with "firm-grip" buckles are completely resistant to battery acid. Kit includes four #8, 3/4" screws and two footman clamps.
Attwood Battery Switch 12 To 50V Dc On/Off - 14233-7 - 23-142337F1
Compact, heavy-duty battery switch with removable control knob to deter theft. 200 Amps Continuous / 300 Amps Intermittent / on-off-separateErgonomic gripsRemovable walls for easy
Attwood Bi-Color Deck Mount Light, Stainless Steel - 66318-7 - 23-663187F1
Stainless steel. Provides 1-mile visibility for boats up to 39.4' in length. Includes 8-watt lamp. Installs with (3) #6 fasteners (not included). Combination light: 225° visibility.Size: 2-1/2" L x 2-1/4" W x 1-1/2" H.
Attwood Boat Cover Support Pole 28-48" - 10704-5 - 23-107045F1
1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends.
Attwood Boat Cover Support Pole 36-64" - 10705-5 - 23-107055F1
1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends.
Attwood Bow Eye U-Bolt 1/2"-13 X 3-1/4" - 545004 - 23-33923F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Bow Eye U-Bolt 3/8"-16 X 2-7/16" - 546465 - 23-33963F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Bow Eye U-Bolt Stainless Steel 1/2-13 X 3-1/4" - 66261L3 - 23-66261L3F1
Made from long-lasting stainless steel. When transom mounted can function as a ski tow hook. Nut and washers included.
Attwood Brass Snap-Handle Drain Plug Without Chain - 7524A7 - 23-7524A7F1
Features stainless steel construction. Simply snap handle down to lock plug in tube, raise handle to remove. Shaft, handle and washers are saltwater corrosion resistant. Without chain.
Attwood Bronze Bushing For Bases And Posts - P30006 - 148-P30006F1
Bronze Bushing for Bases and Posts
Attwood Cast Bronze Garboard Drain Plug 1/2" Npt - 2065507 - 23-75553F1
Provides bilge drainage when hauling out. Nut removes with wrench or pliers. Machined, tapered pipe threads ensure watertight plug fit. 3/8" neck depth. Three countersunk holes for #8 screws.
Attwood Casting Seat, Gray - 98505Gy - 23-98505Gyf1
Ergonomic foam padding Durable high impact plastic base (no wood)Fits all standard seat mountsUniversal 5" x 5" (12.7 cm x 12.7 cm) mounting pattern
Attwood Clamp-On Rail Base For Sure Grip Rod Holder - 1159341 - 23-50743F1
Fit a variety of mounting surfaces including rails. Constructed of extruded aluminum.
Attwood Cleat Cast Aluminum 4-1/2" - 12121-3 - 23-121213F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 6" - 12125-3 - 23-121253F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Cast Aluminum 8" - 12127-3 - 23-121273F1
Ideal for small boats and docks. Two holes for required fasteners. Conveniently pre-drilled with two holes for easy, secure installation.
Attwood Cleat Hollow Base 6" - 66009L6 - 23-66009L6F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Hollow Base 8" - 66010L3 - 23-66010L3F1
Classic herreshoff design provides traditional styling, easy line tie-off, and corrossion-resistance. Enhanced 316 Stainless Steel construction. Four holes for required fasteners.
Attwood Cleat Nylon 6-1/2" - 12112-1 - 23-121121F1
Corrosion-resistant economical cleat Two holes for required fastenersUV-resistant
Attwood Collector Box For 1423,1424,1425,1426,1494,1496A - 1341-1 - 23-13411F1
Cut-outs for two 3' I.D. hoses. Corrosion-resistant plastic. For use w/plastic venturi, flush louvered, or trimline vent.
Attwood Collector Box For 1495 Vent - 1345-1 - 23-13451F1
Use with plastic louvered vent, with two 3" I.D. wire supported ventilation hoses. Box fastens to vent with screws or pop rivets, vent then fastens to the deck. Corrosion-resistant plastic.
Attwood Cowl Ventilator 6" - 1364A3 - 23-1364A3F1
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Chrome-plated zinc. Flange is non corrosive plastic. Installs with #8 fasteners.
Attwood Deck Fill Replacement Cap For 66126, Stainless Steel - 66061-3 - 23-660613F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Fill Replacement Cap For 66406, 66408, 66408C1, Stainless Steel - 66074-3 - 23-660743F1
316 Stainless Steel. Attached with stainless steel beaded chain.
Attwood Deck Plate 6" White - 12792-1 - 23-127921F1
Allows additional storage options to your canoe, kayak or small boat access unusable spaces and for inspection of and general access to valves and deck vents. Easy opening, screw-out design - no tools required. High-impact ABS plastic with textured surface. Durable, rugged, weather-resistant. Flange is pre-drilled for #8 screws.
Attwood Deluxe Anchor Lift 'N Lock Control - 13702-4 - 23-137024F1
High impact, reinforced nylon anchor lift and pulley with stainless steel shaft and protective black cover. Easy pull up, lock and release. Supports up to a 20 lb. anchor with 1/4" to 7/16" diameter rope.
Attwood Deluxe Boat Cover Support System For Boats Up To 19' - 10795-4 - 23-107954F1
One of the best cover support systems on the market. Easily adjustable boat cover support keeps water from accumulating in center of cover. Extends the life of the cover by as much as 50%.Telescoping center pole (28" - 48"), poly web straps, and bow spreader form a double ridge line under the cover. Pole rests on a rubber foot and the web straps attach to the stern with non-marring hooks. Aluminum pole: 1" diameterPoly web straps: 1" wide, black
Attwood Door Hinge Cast Stainless Steel 4"L X 1-1/2"W (Pair) - 66029-3 - 23-660293F1
Cast stainless steel w/six holes.
Attwood Double Braid Mfp Dock Line, 3/8" X 15', Blue - 11702-7 - 23-117027F1
A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel with one end spliced.
Attwood Epa Compliant Fuel Tank, 12 Gal. W/O Gauge - 8812Lp2 - 23-8812Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 3 Gal. W/O Gauge - 8803Lp2 - 23-8803Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.
Attwood Epa Compliant Fuel Tank, 6 Gal. W/O Gauge, 2 Pack - 8806Lp2 - 23-8806Lp2F1
EPA/CARB COMPLIANTFuel tanks are constructed of multi-layer coextruded HDPE and EVOH. Multi-layer tanks are the most robust and durable low-permeation tanks available and meet the functional and safety requirements of the harsh marine environment. Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent. Compatiible with 1/4" NPT fittings.Priced individually, sold in packs of 2 only.
Attwood Extension Aluminum 16" Threaded - 2164-T - 148-2164Tf1
Fixed height 3/4" pin post. 1.5" diameter brushed aluminum posts. Steel pin.
Attwood Fender, 4" X 16", Blue - 9354Bd1 - 23-9354Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 4" X 16", White - 9354D1 - 23-9354D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", Blue - 9355Bd1 - 23-9355Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 5" X 22", White - 9355D1 - 23-9355D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", Blue - 9356Bd1 - 23-9356Bd1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 6" X 24", White - 9356D1 - 23-9356D1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", Blue - 9358B1 - 23-9358B1F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fender, 8" X 28", White - 2723981 - 23-93581F1
Oval fenders are ribbed and shaped to resist rolling, for less swing and wear on hull sides. The seamless design is guaranteed against splitting or bursting for the life of the fender. The thick-wall reinforced eye ends hold a heavy duty line up to 3/4'' thick. Lifetime guarantee. Made in the USA.
Attwood Fixed Height Ski Pylon 45" , Post Diameter 1-1/2", Stainless Steel - 903-009-S - 148-903009Sf1
Pro swivel 360° rotating head with nylon bushing for smooth pulling Stainless steel armsThreaded stainless steel flush mount base
Attwood Flat Gas Spring Mounting Bracket Ball Pem Forward 2 Holes Stainless Steel - Sl40Ssp3-7 - 23-Sl40Ssp37F1
Mounting bracket: pem type: Ball 10mm. direction forward.
Attwood Flexible Grab Handle - 58927 - 23-20615F1
Flexible grab handles for flush, flexible mounting. They can be mounted to a variety of irregular surfaces and angles on swim platforms, cockpits and companionways. Constructed from soft polypropylene webbing over a semi-rigid core. Available with or without an over-molded grip. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might impact them. They meet the ABYC H-41 standard for strength: withstand a load of 400 lbs. in any direction. All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
Attwood Flush Base For Sure Grip Rod Holder - 1158245 - 23-50713F1
Fit a variety of mounting surfaces including rails Constructed of extruded aluminum
Attwood Flush Cleat 4-1/2" - 66512-7 - 23-665127F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 4-1/2", Counter-Sunk - 66510-7 - 23-665107F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 6" - 66516-7 - 23-665167F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Cleat 8" - 66524-1 - 23-665241F1
Recesses flush to the deck for a clean, contemporary look. Stud mount. Cleat recesses into cast body, and is captured with lubricated seals. Durable, cast 316 Stainless Steel construction and simple design assures long-life and dependable operation. Easy Installation. 1/8" stamped backing plate, for decks thicker than 1/2", is standard on all models.
Attwood Flush Hinge, Square End, Stamped Stainless Steel 2-3/4" X 1-9/16" - 66239-3 - 23-662393F1
Unique double stud design allows for a flush installation while providing a full 180° swing. This makes them the perfect hinge for lazzerette or fish box covers in the cockpit sole. Made of solid stamped stainless steel.
Attwood Flush Mount Transom Light Round - 6356D7 - 23-6356D7F1
Stainless steel with plastic body and watertight lamp socket. Provide 2-mile visibility for craft up to 164' in length. 7-1/2 watt lamp and two stainless steel #10 screws included. Model 6356 has a translucent back so it can also be used to light an interior compartment. Uses #90 replacement bulb.
Attwood Fold Down Aluminum Dock Cleat, 6" - 12048-4 - 23-120484F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Down Aluminum Dock Cleat, 8" - 12049-4 - 23-120494F1
Ideal for small boats and watercraft. Cleats simply fold-down when not in use and flip back up when it comes time to tie off. Low-profile, fold-down design keeps cleat clear of dock traffic. Marine-grade aluminum protected with corrosion-resistant finish. Easy to install on all dock types with 2 standard 3/8" carriage bolts (not included).
Attwood Fold Up Drink Holder Black - 199241 - 23-24457F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Drink Holder White - 200702 - 23-24497F1
Dual ring. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mounts quickly and easily on boats or RVs. Flip the small ring up to hold small drinks. For large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. Closed depth of just 7/8". Four holes for #10 screws. Polycarbonate construction.
Attwood Fold Up Trailer Jack, 1000 Lb. - 23-111274 - 23-111274F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fold Up Trailer Jack, 1500 Lb. - 11126-4 - 23-111264F1
Fits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks and releases the jack from one position to the other. Corrosion resistant zinc plated steel tubing. Fold Up jack has a convenient sidewind handle and a tough polypropylene wheel.
Attwood Fuel Connector For Chrysler/Force Nickel Plated Brass 5/16" Barb - 2551008 - 23-88846F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Molded Acetal 3/8" Barb - 2556851 - 23-89006F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 1/4" Npt - 2557216 - 23-89016F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Honda Nickel Plated Brass 3/8" Barb - 2557581 - 23-89026F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 1/4" Npt - 14530-6 - 23-145306F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector For Mercury/Mariner Die Cast Zinc 3/8" Barb - 14534-6 - 23-145346F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.LP = Low Permeation
Attwood Fuel Connector Universal, Brass For 3/8" Hose, 1/4" Npt - 14540-6 - 23-145406F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
