Select Category
_0x200.jpg)
Stainless Countersunk Finishing Washer, #6 - Rp-Sc31434 - 50-00949F1
316 Stainless Steel.
Stainless Countersunk Finishing Washer, #8 - Rp-Sc31435 - 50-00951F1
316 Stainless Steel.
Stainless Detail Brush W/Plastic Handle - 40064 - 74-40064F1
Has molded finger grips.
Stainless Diamond Eye Plate-3 - 88621 - 354-088621F1
Made from investment cast 316 stainless steel these corrosion resistant diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside your boat. Use diamond eye plates to secure fenders, cargo net, etc. Installs with four 1/4" FH fasteners (not included).
Stainless Diamond Eye Plate-3 - 88622 - 354-088622F1
Made from investment cast 316 stainless steel these corrosion resistant diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside your boat. Use diamond eye plates to secure fenders, cargo net, etc. Installs with four 1/4" FH fasteners (not included).
Stainless Door Button - 221670 - 354-221670F1
Stainless door button w/injection molded Constructed of corrosion resistant 304 stainless steel and injection molded nylon. These Door Stop Buttons are a sleek, simple and effective hardware solution to keep doors closed. Surface mount easily with four #8 FH fasteners (not included).
Stainless Door Button - 221670-1 - 354-2216701F1
Constructed of corrosion resistant 304 stainless steel and injection molded nylon. These Door Stop Buttons are a sleek, simple and effective hardware solution to keep doors closed. Surface mount easily with four #8 FH fasteners (not included).
Stainless Door Hinge - 201530-1 - 354-2015301F1
These Door Hinges are constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Stainless External Tooth Lock Washer #10 - Rp-Sc1444 - 50-01019F1
410 Stainless Steel
Stainless External Tooth Lock Washer 1/4" - Rp-Sc1446 - 50-01021F1
410 Stainless Steel
Stainless External Tooth Lock Washer 3/8" - Rp-Sc1448 - 50-01024F1
410 Stainless Steel
Stainless External Tooth Lock Washer 5/16" - Rp-Sc1447 - 50-01023F1
410 Stainless Steel
Stainless Fender Washer #10, .050" Thick, Od 3/4" - Rp-Sc4797 - 50-00979F1
18-8 Stainless Steel.
Stainless Fender Washer #10, .062" Thick, Od 1" - Rp-Sc1429 - 50-00981F1
18-8 Stainless Steel.
Stainless Fender Washer #6, .050" Thick, Od 3/4" - Rp-Sc4751 - 50-00977F1
18-8 Stainless Steel.
Stainless Fender Washer #8, .050" Thick, Od 3/4" - Rp-Sc4752 - 50-00978F1
18-8 Stainless Steel.
Stainless Fender Washer 1/2", .109" Thick, Od 2 - Rp-Sc1433 - 50-00989F1
18-8 Stainless Steel.
Stainless Fender Washer 1/4", .050" Thick, Od 1" - Rp-Sc31430 - 50-01697F1
316 Stainless Steel.
Stainless Fender Washer 1/4", .062" Thick ,Od 1" - Rp-Sc1430 - 50-00983F1
18-8 Stainless Steel.
Stainless Fender Washer 1/4", .062" Thick, Od 1-1/2 - Rp-Sc6635 - 50-00986F1
18-8 Stainless Steel.
Stainless Fender Washer 1/4", .062" Thick1/4", Od1-1/4" - Rp-Sc1440 - 50-00984F1
18-8 Stainless Steel.
Stainless Fender Washer 3/8", .078" Thick, Od 1-1/2" - Rp-Sc1432 - 50-00988F1
18-8 Stainless Steel.
Stainless Fender Washer 5/16", .062" Thick, Od 1-1/2" - Rp-Sc31431 - 50-01698F1
316 Stainless Steel.
Stainless Fender Washer 5/16", .078" Thick, Od 1-1/2 - Rp-Sc1431 - 50-00987F1
18-8 Stainless Steel.
Stainless Fender Washer 5/8", .109" Thick, Od 2" - Rp-Sc4753 - 50-00991F1
18-8 Stainless Steel.
Stainless Folding Step - 328020-1 - 354-3280201F1
Stainless steel.
Stainless Fresh Water Inlet - 513110-1 - 354-5131101F1
Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water. Pipe size: 1/2" FIPT x 3/4" FGHT.
Stainless Gas Lift Hardware, 10Mm Ball Stud - 1892 - 32-1892F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Gas Lift Hardware, 13Mm Ball Stud - 1890 - 32-1890F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Gas Lift Hardware, Angled Mount Bracket W/Ball Stud - 1888 - 32-1888F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Gas Lift Hardware, Angled Mounting Bracket, Pair - 1883 - 32-1883F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Gas Lift Hardware, Double Angle Mounting Brackt, Pair - 1891 - 32-1891F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Gas Lift Hardware, Flat Mounting Brackt W/Ball Stud, Pair - 1886 - 32-1886F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Stainless Impeller Puller, Sm., 1-1/4" - 2-9/16" - 660040-1 - 354-6600401F1
Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.
Stainless Link Arm, Mercury 150Hp & Down - A73Ss - 216-A73Ssf1
Stainless Link Arm, Merc 150hp & Down
Stainless Link Arm, Omc 150 H.P. & Down - A74Ss - 216-A74Ssf1
Stainless Link Arm, OMC 150Hp & Down
Stainless Oblong Eye Plate-3 1 - 88722 - 354-088722F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Oblong Eye Plate-3 I - 88721 - 354-088721F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Oblong Eye Plate-4 I - 88723 - 354-088723F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Pontoon Gate Latch - 221880-1 - 354-2218801F1
Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Installs with 1/4" thru bolt (not included).
Stainless Release Pin 1/4" X 1-1/2" - 193415 - 354-193415F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1-1/2", Pr. - 193415-1 - 354-1934151F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1" - 193410 - 354-193410F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1", Pr. - 193410-1 - 354-1934101F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16" - 193420 - 354-193420F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16", Pr. - 193420-1 - 354-1934201F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/2" - 193425 - 354-193425F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/2", Pr. - 193425-1 - 354-1934251F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Snap Handle Drain Plug, 1", 20 Pc Display - 520075-5 - 354-5200755F1
Stainless Snap Handle Drain Plug, 1"
Stainless Snap Handle Drain Plug, 1", Bulk - 520075-1 - 354-5200751F1
Stainless Snap Handle Drain Plug, 1"
Stainless Steel Cable - 2215396 - 627-2215396F1
7-strand, 316-grade stainless steel 150-lb test cable.
Stainless Steel Cigarette/Char - 426352-1 - 354-4263521F1
Combination chart light and cigarette lighter with the flick of a switch. Stainless mounting plate. Chrome steel sockets should only be used on fresh water boats. Use #8FH fastener.
Stainless Steel Cushion Clamp1-1/2" - 50-23281 - 50-23281F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp1-1/4" - 50-23271 - 50-23271F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp1-3/4" - 50-23291 - 50-23291F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp1" - 50-23261 - 50-23261F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp1/2" - 50-23231 - 50-23231F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp1/4" - 50-23201 - 50-23201F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp2-1/2" - 50-23311 - 50-23311F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp2" - 50-23301 - 50-23301F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp3" - 50-23321 - 50-23321F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp3/4" - 50-23251 - 50-23251F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp3/8" - 50-23221 - 50-23221F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp5/16" - 50-23211 - 50-23211F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Cushion Clamp5/8" - 50-23241 - 50-23241F1
Resistant to oils, acids and salt water. All clamps have a #10 stud size. Temperature range form -50° to 300°F. 304 Stainless Steel.
Stainless Steel Custom Look Four Way Ratchet Mount - 5187 - 167-5187F1
Sleek, four-way ratchet mount with a nutless design. Has standard 1"-14 threads and a special cable slot that eliminates removal of most factory installed connectors. Easy on the eye, and super easy to use. 5° Teeth fo finer adjustments than standard mounts.
Stainless Steel Drape Hook, 14/Pk - A113 - 350-A113F1
For use in hanging drapes. Stainless Steel hooks prevent rust and stains on drapery.
Stainless Steel Gunwale Tiedowns, 13' - 60429 - 74-60429F1
2" Polyester webbing tie down features stainless steel quick release buckle and hooks. Rated to 750 lbs. with a safe work load of 250 lbs. Clam shell packed.
Stainless Steel Gunwale Tiedowns, 16' - 60430 - 74-60430F1
2 Polyester webbing tie down features stainless steel quick release buckle and hooks. Rated to 750 lbs. with a safe work load of 250 lbs. Clam shell packed.
Stainless Steel Heavy Duty 4-Way Ratchet Mount - 4187-Hd - 167-4187Hdf1
Extra Heavy Duty Stainless Steel Ratchet Mount. Same as Style 4187 with extra strength and rigidity. Use wherever its extra heavy-duty construction is needed.
Stainless Steel Locking Wire .032 1Lb Feeder - 30087 - 355-30087F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel. 1/4#.
Stainless Steel Locking Wire .041 1Lb Feeder - 30088 - 355-30088F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel. 1/4#.
Stainless Steel Low Profile Flange Mount - 4710 - 167-4710F1
Heavy-duty, low profile, 1" high mount with standard 1"-14 threads. Great for GPS, Marine TV and shorter antennas.
Stainless Steel Microphone Clip - 329990-1 - 354-3299901F1
Secure your microphone close to your radio with this one-piece corrosion resistant clip. Fits all standard microphones for hailers, VHF or CB radios. Fasteners not included.Carded.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62670 - 11-Gss62670F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62680 - 11-Gss62680F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62710 - 11-Gss62710F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62720 - 11-Gss62720F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62740 - 11-Gss62740F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62770 - 11-Gss62770F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62780 - 11-Gss62780F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62790 - 11-Gss62790F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Portlight - 393820862 - 239-393820862F1
Highly polished stainless outer frame portlight with interior trim ring. The handles and hinge system leave the lens clear of obstructions, giving an uncluttered view and a clean, modern look. Portlight handles are unable to vibrate open when in the closed position. Complete with flyscreen. Easily fitted and installs with sealant or closed cell PVC tape.
Stainless Steel Receiver And Coupler Lock Combo - 580406 - 220-580406F1
This simple, convenient stainless steel set is keyed alike for ease-of-use. Sleeve allows receiver lock to be used on 2" x 2" or 1-1/4" x 1-1/4" receivers and features a dust cap for dust and corrosion resistance.
Stainless Steel Receiver Lock - 580405 - 220-580405F1
Sleeve allows lock to be used on 2" x 2" or 1-1/4" x 1-1/4" receivers. Safe and secure, it will keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Stainless Steel Scupper Valve - 66553-3 - 23-665533F1
Backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat. The scupper flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce back wash. Fastners are concealed and corrosion-proof. Lifetime warranty. Rugged Stainless Construction Cast from certified enhanced 316 Stainless Steel for strength and lifetime corrosion-resistance.We polish all visible areas to a mirror finish, then each part goes through a passivation for additional protectionThick steel sidewalls withstand continual stress and hose flexing Caution: Thru-Hull connectors are designed for installation above the water line only
Stainless Steel Soft Tie Wire, .025" X 592' - 0.025 - 826-025F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel.
Stainless Steel Soft Tie Wire, .032" X 360' - 0.032 - 826-032F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel.
Stainless Steel Soft Tie Wire, .041" X 220' - 0.041 - 826-041F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel.
Stainless Steel Soft Tie Wire, .050" X 148' - 0.05 - 826-050F1
Often used to secure shackle pins in mooring applications. Non corrosive stainless steel.
Stainless Steel Standard 4-Way Ratchet Mount - 4187 - 167-4187F1
Versatile four-way ratchet design for deck or side mounting. Quick-action handle makes operation easy.
Stainless Stern Eye, 1/2 X 3-7/16, Bulk - 33730 - 50-33730 Superseded By: 50-33661F1
304 Stainless Stern Eye, 1/2 x 3-7/16, Bulk
Stainless Strap Hinge 4-1/8", Pair - 201134-1 - 354-2011341F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion 304 resistant stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Strap Hinge 6-1/8", Pair - 201136-1 - 354-2011361F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 304 stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Surface Mount Lift Ring - 221830-1 - 354-2218301F1
Constructed of corrosion resistant 304 stamped stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Surface mounted for easy installation with four #10 FH fasteners (not included).
Stainless Surface Mount Lift Ring - 221831-1 - 354-2218311F1
Designed to keep your valuables protected, the Surface Mount Locking Ring Pull is ideal for hatches, deck plates, cabinets, and drawers. Constructed of corrosion resistant 304 stamped stainless steel with a die cast zinc lock. Ring is recessed for a flush, clean installation. Comes with two matching keys. Keys are random so requesting multiple rings keyed alike is not possible. Comes with two locking arms for flush or offset installations. Installs with back mounted threaded nut.
Stanchion Mount Anchor Bracket - Pm2 - 332-Pm2F1
Stows all Danforth® and Danforth Deepset® and Fortress® anchors securely to any vertical stanchion. For anchors to 35 lbs. All-stainless, will fit both 7/8" and 1" stanchions.
