Select Category
_0x200.jpg)
Pollak 7Wb-178Pfv 7-Way Blade Vehicle End Socket To Dual 5-Way & 4-Way Flat Connections - 7Wb-178Pfv - 329-7Wb178Pfvf1
Tow trailers with 5 Flat OR 4 Flat connectorsEasy installation, no need to rewire
Pollak 97 Db Back-Up Alarm - 41-820 - 329-41820F1
The rugged and compact Pollalert allows replacement of unnecessarily large and bulky alarms currently used on light and medium duty trucks, dump trucks, motor homes, campers, electric fork lifts and other similar applications. 12-36 Volts, polarity protectedCurrent draw less than 0.1 ampsSolid state electronicsCertified conformance to S.A.E. J994, type CMeets State, Federal and U.S. Army Corps of Engineers' requirements4"W x 2.0"D x 2.5"HMade of High impact non corroding plasticCan be used on positive and negative ground vehiclesHorizontal or vertical mounting in protected areas.300" Dia. holes on 3.25" centersOperates in temperature ranges -40° F to 170° F
Pollak Adapter, 6-Way Round To 4-Way Flat - P717 - 350-P717 Superseded By: 329-6P102Vf1
Converts 6-Pole Round Connector to a 4-Pole molded connector. Quick and easy to connect. Non-corrosive nylon shell and insert. Eliminates makeshift jumpers.
Pollak Adapter, 7-Way Rv To 5-Way Flat - P718 - 350-P718 Superseded By: 329-7Wb178Pfvf1
Converts 7-Pole Blade Connector to a 5-Pole molded connector. Allows one vehicle to tow either campers or boat trailers with electric brakes. Quick and easy to connect. Full-length plug shell ensures positive latching. Non-corrosive nylon shell and insert.
Pollak Adapter, 7-Way Rv To 6-Way Round, Auxiliary Center Pin - P729 - 350-P729 Superseded By: 329-7Wb119Vf1
Converts 7-Pole Blade Connector to a 6-Pole Round Connector Plug. Allows one vehicle to tow either campers or utility trailers. Quick and easy to connect. Non-corrosive nylon shell and insert. Adapter has auxiliary pin in center.
Pollution Prevention Label - Il227 - 22-Il227F1
Blue lettering on white vinly. Will stick to any clean surface.
Poly 3-Position Key Switch W/C - 420382-1 - 354-4203821F1
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six screw or five screw plus one boss terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Includes two keys. Push to choke.
Poly 4-Position Key Switch W/C - 420375-1 - 354-4203751F1
Four Position Ignition Switch is constructed of polypropylene. For accessory, off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw or four blade terminal electrical configurations. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys.
Poly America Sf0950100W Premium Shrink Wrap -9 Mil, 50' X 100', White - Sf0950100W - 28-Sf0950100Wf1
Premium 9 Mil shrink wrap.
Poly America Sfhm1040100W Premium Shrink Wrap -10 Mil, 40' X 100', White - Sfhm1040100W - 28-Sfhm1040100Wf1
Premium 10 Mil shrink wrap.
Poly Brush - 1" @48 - Pb1 - 211-Pb1F1
Throw-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish. Sold in full boxes.
Poly Brush - 2" @48 - Pb2 - 211-Pb2F1
Throw-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish. Sold in full boxes.
Poly Brush - 3" @36 - Pb3 - 211-Pb3F1
Throw-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish. Sold in full boxes.
Poly Brush - 4" @24 - Pb4 - 211-Pb4F1
Throw-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish. Sold in full boxes.
Poly Foam Padding 6" X 75' - Pfp675 - 315-Pfp675F1
Poly In-Line Strainer, 1/2" - 364135 - 354-364135F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly In-Line Strainer, 3/4" - 364137 - 354-364137F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly In-Line Strainer, 5/8" - 364136 - 354-364136F1
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction side of pump.
Poly Planar Me60Bt Bluetooth Wireless Amplifier W/Waterproof Control Pad - Me60Bt - 665-Me60Btf1
The ME60BT is a four channel, 120 Watts RMS Bluetooth wireless audio amplifier capable of delivering up to 30W RMS per channel.It has a compact, water resistant design that allows for flexible mounting possibilities. The control keypad is designed to withstandinstallation in the gas zone of a portable spa and is equally suited for use in a marine environment. The unit accepts either audio streamed via Bluetooth connection or hard wired input via RCA input. The waterproof control pad is easily mounted, as the body of the keypad is threaded and the large mounting nut is tightened against the back side of the mounting surface. Input mode - Bluetooth or directPlay/pause - available in Bluetooth modeTrack forward/repeat - available in Bluetooth modeVolume up/down - available in both Bluetooth and direct mode
Poly Roller - 9 @24 - Pr9 - 211-Pr9F1
Throw-away applicators, for all smooth surfaces. Ideal for application of enamel, latex, stain, oil paints and varnish. Not for shellac or lacquer. Leaves no brush marks or loose bristles. Rollers fit all standard holders. Has less spatter and a smoother finish. Sold in full boxes.
Poly-Planar Ma3030 Waterproof 3" Component Box Speakers, Grey (Sold As Pair) - Ma3030G - 665-Ma3030Gf1
Completely waterproof, they are easily mounted in either the horizontal or vertical orientation with the supplied bracket.
Poly-Planar Ma840B Waterproof Sub Compact Box Speakers 4-3/16" X 4-1/16", Black, 1 Pr. - Ma-840B - 665-Ma840Bf1
Ideal for locations where other speakers won't fit. Speakers feature low magnetic field and will handle 80 watts/pair. Polypropylene cones, stainless steel grills and brackets, and heavy-duty ABS enclosures make them corrosion-proof and waterproof. Dual cone design with 3" main cone size.
Poly-Planar Ma9060B 5-1/4" Waterproof 100W Box Speakers, Black (Sold As Pairs) - Ma-9060B - 665-Ma9060Bf1
Features low magnetic field, full range, bass reflex box speakers offer top quality sound. Will handle 200 watts/pair. Gimbal mounting bracket included.
Poly-Planar Mb21B Waterproof Vhf Extension Speakers Surface Mount 8W 2-15/16" X 2-3/4", Black - Mb21B - 665-Mb21Bf1
Waterproof VHF extension speaker can be mounted in any convenient location and feature polypropylene speaker cones with stainless steel grills and mounts. Includes a 10' lead wire with mini-plug.
Poly-Planar Mb21W Waterproof Vhf Extension Speakers Surface Mount 8W 2-15/16" X 2-3/4", White - Mb21W - 665-Mb21Wf1
Waterproof VHF extension speaker can be mounted in any convenient location and feature polypropylene speaker cones with stainless steel grills and mounts. Includes a 10' lead wire with mini-plug.
Poly-Planar Rm10 Overhead Radio Mount - Rm10 - 665-Rm10F1
Designed to accommodate today's larger front panel format marine radios as well as older DIN style and post mount. Made from heavy wall ABS plastic. It has room for all the accessory cables found on the newest radios. Can be installed overhead or under dash. Mounting hardware included. Accepts PolyPlanar and most other brands of stereos, including Sony, Jensen and more.
Poly. Rocker-3 Pos. Illum. - 420258-1 - 354-4202581F1
These Illuminating Rocker Switches are constructed of durable injection molded nylon and stamped brass. Illuminates in the ON position. Easy to install by simply snapping into a standard 7/8" x 1-7/16" panel slot, with wiring for 1/4" blade terminals. 15A @ 12VDC.
Polyester Gel Paste - 100695 - 75-100695F1
A neutral color polyester paste for permanent gel-coat marine repairs. Neatly covers gouges, scrapes and scratches in fiberglass. Mix paste with Evercoat Coloring Agents to provide correct color match. Hardener included.
Polyester Glazing Putty 1/2Gal - 100407 - 75-100407F1
The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included.
Polyester Glazing Putty 20 Oz. - 100400 - 75-100400F1
The original polyester glazing putty. Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included.
Polyester Toggle Switch - Tg40070 - 11-Tg40070F1
Non-corrosive plastic construction. Illuminates white when panel lights lights are OFF, changes to red when switch is ON. Brass blade terminals, silver contacts. 15/32" L x 15/32" -32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position.
Polyester Toggles Switch - Tg40040-1 - 11-Tg400401F1
Non-corrosive plastic construction. Brass blade terminals, silver contacts. 15/32" L x 15/32" - 32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position.
Polyester Toggles/11-40310 - Tg40310 - 11-Tg40310F1
Lights through tip of handle. Non-corrosive plastic construction. Illuminates white when panel lights are ON, changes to red when switch is ON. Brass blade terminals, silver contacts. 15/32" L x 15/32" -32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position.
Polyester Toggles/S11-40060 - Tg40060 - 11-Tg40060F1
Non-corrosive plastic construction. Illuminates white when panel lights lights are OFF, changes to red when switch is ON. Brass blade terminals, silver contacts. 15/32" L x 15/32" -32 mounting stem. Rated: 20 amps @ 12 VDC. On in parenthesis (On) indicates a momentary position.
Polyethylene 2-Rod Rack, White - P03-062W - 236-P03062Wf1
Durable polyethylene to withstand the harsh marine environment Flared 1-3/4" diameter rodholder for easy rod handlingSlotted rod holders lock in most conventional and spinning outfitsDeluxe racks feature convenient integrated slots for knife & pliersLight racks feature closer rod holder spacing; ideal when space is limited
Polyethylene 3-Rod Rack, White - P03-063W - 236-P03063Wf1
Durable polyethylene to withstand the harsh marine environmentFlared 1-3/4" diameter rodholder for easy rod handlingSlotted rod holders lock in most conventional and spinning outfitsDeluxe racks feature convenient integrated slots for knife & pliersLight racks feature closer rod holder spacing; ideal when space is limited
Polyethylene 4-Rod Rack, Black - P03-064B - 236-P03064Bf1
Durable polyethylene to withstand the harsh marine environment Flared 1-3/4" diameter rodholder for easy rod handlingSlotted rod holders lock in most conventional and spinning outfitsDeluxe racks feature convenient integrated slots for knife & pliersLight racks feature closer rod holder spacing; ideal when space is limited
Polyethylene 4-Rod Rack, White - P03-064W - 236-P03064Wf1
Durable polyethylene to withstand the harsh marine environment Flared 1-3/4" diameter rodholder for easy rod handlingSlotted rod holders lock in most conventional and spinning outfitsDeluxe racks feature convenient integrated slots for knife & pliersLight racks feature closer rod holder spacing; ideal when space is limited
Polyform 01-469-416 Center Tube Htm Series Fender, 10.5" X 27" , Forest Green - 01-469-416 - 218-Htm3Fgf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 02-754-379 Twin Eye G Series Fender, 6.5" X 22", Lime - 02-754-379 - 218-G4Limef1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 03-088-059 Center Tube Htm Series Fender, 10.5" X 27" , Blue - 03-088-059 - 218-Htm3Bf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 04-159-298 Center Tube Htm Series Fender, 10.5" X 27" , Lime - 04-159-298 - 218-Htm3Limef1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 04-175-569 Fender Cover For Htm-4, Black - 04-175-569 - 218-Efc4Blkf1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 04-271-298 Twin Eye G Series Fender, 4.5" X 15.5", Blue - 04-271-298 - 218-G2Bf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 04-954-067 Twin Eye G Series Fender, 6.5" X 22", Teal - 04-954-067 - 218-G4Tf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 05-117-533 Twin Eye G Series Fender, 3.5" X 12.8", Blue - 05-117-533 - 218-G1Bf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 05-299-054 Fender Cover For F-10, Black - 05-299-054 - 218-Efc10Blkf1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 05-415-359 Twin Eye G Series Fender, 6.5" X 22", Classic Red - 05-415-359 - 218-G4Crf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 06-198-906 Twin Eye G Series Fender, 4.5" X 15.5", Black - 06-198-906 - 218-G2Blkf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 07-834-817 Center Tube Htm Series Fender, 8.5" X 20.5", Sand - 07-834-817 - 218-Htm2Sandf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 07-864-268 Center Tube Htm Series Fender, 6.3" X 15.5", Catalina Blue - 07-864-268 - 218-Htm1Catalinaf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 08-511-282 Twin Eye G Series Fender, 6.5" X 22", Sand - 08-511-282 - 218-G4Sf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 10-377-440 Center Tube Htm Series Fender, 6.3" X 15.5", Blue - 10-377-440 - 218-Htm1Bf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 11-023-976 Twin Eye G Series Fender, 8.8" X 26.8", Teal - 11-023-976 - 218-G5Tf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 12-964-872 Twin Eye G Series Fender, 8.8" X 26.8", Cobalt Blue - 12-964-872 - 218-G5Cbf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 13-838-982 Twin Eye G Series Fender, 8.8" X 26.8", Navy Blue - 13-838-982 - 218-G5Nf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 14-390-825 Elite Fender Cover For A-4, Blue - 14-390-825 - 218-Efca4Bluef1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 14-443-278 Twin Eye G Series Fender, 8.8" X 26.8", Forest Green - 14-443-278 - 218-G5Fgf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 15-438-475 Fender Cover For G-4, Htm-1, F-1, Nf-4, Black - 15-438-475 - 218-Efc1Blkf1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 15-460-041 Center Tube Htm Series Fender, 8.5" X 20.5", Burgundy - 15-460-041 - 218-Htm2Burf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 16-436-415 Center Tube Htm Series Fender, 8.5" X 20.5", Blue - 16-436-415 - 218-Htm2Bf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 17-947-853 Center Tube Htm Series Fender, 8.5" X 20.5", Lime - 17-947-853 - 218-Htm2Limef1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 20-287-231 Center Tube Htm Series Fender, 6.3" X 15.5", Burgundy - 20-287-231 - 218-Htm1Burf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 20-953-038 Center Tube Htm Series Fender, 8.5" X 20.5", White - 20-953-038 - 218-Htm2Wf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 20-997-926 Twin Eye F Series Fender, 11" X 42" - 20-997-926 - 218-F6Wf1
Unique vinyl valve seals securely Even wall thickness for maximum strength and durabilityMultiple ribbed reinforced ropeholdsTwin-eye design for vertical or horizontal useDesigned for use in permanent unprotected moorings, pilings, locks and concrete walls
Polyform 22-830-435 Twin Eye G Series Fender, 6.5" X 22", Black - 22-830-435 - 218-G4Blkf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 24-582-243 Twin Eye F Series Fender, 15" X 58" - 24-582-243 - 218-F8Wf1
Unique vinyl valve seals securely Even wall thickness for maximum strength and durabilityMultiple ribbed reinforced ropeholdsTwin-eye design for vertical or horizontal useDesigned for use in permanent unprotected moorings, pilings, locks and concrete walls
Polyform 24-609-402 Twin Eye G Series Fender, 4.5" X 15.5", Teal - 24-609-402 - 218-G2Tf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 24-890-772 Center Tube Htm Series Fender, 13.5" X 34.8", Black - 24-890-772 - 218-Htm4Blkf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 25-421-919 Twin Eye G Series Fender, 5.5" X 19", Sand - 25-421-919 - 218-G3Sf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 25-682-925 Fender Cover For Htm-4, Blue - 25-682-925 - 218-Efc4Bluef1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 25-707-693 Twin Eye G Series Fender, 6.5" X 22", Burgundy - 25-707-693 - 218-G4Burgf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 29-576-912 Twin Eye G Series Fender, 5.5" X 19", Orange - 29-576-912 - 218-G3Of1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 30-347-20 Center Tube Htm Series Fender, 13.5" X 34.8", Blue - 30-347-203 - 218-Htm4Bluf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced tube endsDesigned for use in medium duty applications in both permanent protected and unprotected mooringsUnique Polyform valve for years of service
Polyform 33-618-184 Elite Fender Cover For A-3, Blue - 33-618-184 - 218-Efca3Bluef1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 33-939-351 Twin Eye G Series Fender, 5.5" X 19", Grey - 33-939-351 - 218-G3Greyf1
Even wall thickness for maximum strengthMolded in ribs for strength and abrasion resistanceReinforced rope holdsDesigned for use by trailered boats and permanent protected mooringsUnique Polyform valve for years of service
Polyform 34-943-210 Elite Fender Cover For A3, Black - 34-943-210 - 218-Efca3Blkf1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 36-712-727 Fender Cover For G-5, Htm-2, F-2, Nf-5, Blue - 36-712-727 - 218-Efc2Bluef1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 37-158-571 Fender Cover For G-4, Htm-1, F-1, Nf-4, Blue - 37-158-571 - 218-Efc1Bluef1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
Polyform 37-453-829 Twin Eye F Series Fender, 21.2" X 57.5" - 37-453-829 - 218-F11Wf1
Unique vinyl valve seals securely Even wall thickness for maximum strength and durabilityMultiple ribbed reinforced ropeholdsTwin-eye design for vertical or horizontal useDesigned for use in permanent unprotected moorings, pilings, locks and concrete walls
Polyform 37-527-092 Fender Cover For F-6, Black - 37-527-092 - 218-Efc6Blkf1
The Elite fender covers use a premium grade polyester yarn that is highly resistant to abrasion and UV exposure, while keeping excellent color fastness. It also resists water absorption, keeping fenders lighter when wet. Elite covers are woven on a special machine that produces a seamless tube so there are no seams to split. Fully washable, they are custom fit for a tailored look and feature tough, 1/4" drawstrings to eliminate the brittle elastic found on many other fender covers.
