Select Category
_0x200.jpg)
Forespar Replacement Bracket f/WL-1 Floating Strobe LED Waterlight
Forespar Sta-Plug Emergency Plug
Forespar Sta-Plug Foam Emergency Plug - 150110 - 108-150110F1
The StaPlug is the modern solution for emergency leaks on any boat and for maintenance of valves and thruhulls. The StaPlug is a soft, cone shaped plug solid, spongy and coated with a flexible sealer to deal with any hull breach from a small hole or a large tear from a collision. Unlike old fashioned wooden plugs, StaPlug's soft cone shape form allows it to be compressed by hand or cut to fit into any hole whether in the hull or even in leaky or damaged pipes and other thru-hulls. Keep a couple on hand as the near perfect "just in case". Not for fuel leaks.
Forespar Sta-Plug® Mini Emergency Plug
Forespar T150 Marelon Raw Water Strainer, 1-1/2" - 906166 - 108-906166F1
Consists of a Marelon head and a polycarbonate bucket with a stainless steel screen. The screw on clear bucket has a replaceable gasket for a positive seal and ease of cleaning. The T-Stainer allows lower installations. Includes a mounting bracket that allows ports to face any direction, Flow rate is 40 GPM+
Forespar Tea Tree Power 44oz Refill Pouches (2)-22oz pouches
Forespar Tri-Reacher Whisker Pole - 408201 - 108-408201F1
The whisker pole will allow deeper sailing angles and eliminate the need for constant jibing downwind. On long downwind legs, the additional rigging of fore and after guys (attached to the outboard end) will further stabilize the pole. This will also allow emergency furling of the headsail without the need to go forward and deal with the pole first. The inboard ends are Forespar's time proven 'UTS' style socket end or 'UXP' piston style. The outboard end is our 'UXP' style. The 'UTS' end will only fit the Forespar toggle mast car (#333004). The 'UXP' style fits #331000 RC-125 Ring Car or FC-125 (#332002) mast cars and #332025 fixed mast mounts. For use on boats 31'-40': Stows at just 7', telescopes to 21'. Weighs just 19 pounds.
Forespar Vent Barb - 903004 - 108-903004F1
The MF-846 vent barb assembly option can be used in lieu of the standard MF-841 vent cap/duckbill. This option allows venting to the outside of the hull via a 1/4"(6.35mm) hose.
Forged Safety Hook, Galvanized - 226554 - 343-226554F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged Safety Hook, Galvanized - 226608 - 343-226608F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged Safety Hook, Galvanized - 226653 - 343-226653F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged, Galvanized Anchor Shackle, 1" - 201506 - 343-201506F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 1/2" - 201308 - 343-201308F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 1/4" - 201100 - 343-201100F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 3/16" - 201056 - 343-201056F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 3/4" - 201407 - 343-201407F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 3/8" - 201209 - 343-201209F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 5/16" - 201155 - 343-201155F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 5/8" - 201353 - 343-201353F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 7/16" - 201254 - 343-201254F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 7/8" - 201452 - 343-201452F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Formula 27-Half Pint - 75-100572 - 75-100572F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Formula 27-Pint - 100571 - 75-100571F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Formula 27-Quart - 100570 - 75-100570F1
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. A true miracle mender that won't shrink, crack or pop out. A long time favorite of consumers everywhere. Hardener included.
Fortress Aluminum Marine Anchor - Fx-11 - 60-Fx11F1
Manufactured from a hardened aluminum magnesium alloy, making them stronger and lighter than competitive steel anchors. Adjustable fluke angle for soft mud. Disassembles for easy storage. Rustproof and non-magnetic, tough anodized finish. No welds to fail. Used by the US Navy and USCG. Lifetime parts replacement warranty.
Fortress Aluminum Marine Anchor - Fx-16 - 60-Fx16F1
Manufactured from a hardened aluminum magnesium alloy, making them stronger and lighter than competitive steel anchors. Adjustable fluke angle for soft mud. Disassembles for easy storage. Rustproof and non-magnetic, tough anodized finish. No welds to fail. Used by the US Navy and USCG. Lifetime parts replacement warranty.
Fortress Aluminum Marine Anchor - Fx-23 - 60-Fx23F1
Manufactured from a hardened aluminum magnesium alloy, making them stronger and lighter than competitive steel anchors. Adjustable fluke angle for soft mud. Disassembles for easy storage. Rustproof and non-magnetic, tough anodized finish. No welds to fail. Used by the US Navy and USCG. Lifetime parts replacement warranty.
Fortress Aluminum Marine Anchor - Fx-37 - 60-Fx37F1
Manufactured from a hardened aluminum magnesium alloy, making them stronger and lighter than competitive steel anchors. Adjustable fluke angle for soft mud. Disassembles for easy storage. Rustproof and non-magnetic, tough anodized finish. No welds to fail. Used by the US Navy and USCG. Lifetime parts replacement warranty.
Fortress Aluminum Marine Anchor - Fx-7 - 60-Fx7F1
Manufactured from a hardened aluminum magnesium alloy, making them stronger and lighter than competitive steel anchors. Adjustable fluke angle for soft mud. Disassembles for easy storage. Rustproof and non-magnetic, tough anodized finish. No welds to fail. Used by the US Navy and USCG. Lifetime parts replacement warranty.
Fortress Commando Small Craft Anchor System For Boats Up To 16' Includes G-5 Anchor, Storage Bag, 3/16" Shackle With 6' Of Chain And 1/4" X 150' Double Braided Nylon Rope - C5A - 60-C5Af1
Great holding power! Lightweight and rustproof. Assembles in seconds. Originally developed for military raiding craft, the Commando high-tech aluminum alloy Guardian Utility Anchor offers a no-nonsense solution to the problems of anchor storage and deployment on small boats. Everything, including the disassembled Guardian G-5 anchor, can be stored inside the included rugged Dupont® Cordura® Plus storage bag. The modified Guardian anchor can be assembled quickly without tools. The bag itself can be attached permanently to the boat. With the lightweight Guardian anchor, the entire system weighs only 8.5 lbs. and is perfect for Inflatables, Bass Boats, Personal Watercraft, Runabouts, Tenders, Ski Boats, and more.
