Select Category
_0x200.jpg)
Beckson Thirsty-Mate Lifeboat & Commercial Vessel Pump - USCG Approved - 3' Inlet, 10' Outlet
Beckson Thirsty-Mate Hand Pump Without Hose - 124P - 35-124Pf1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump Without Hose - 118P - 35-118Pf1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump With Hose - 230Pf - 35-230Pff1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.
Beckson Thirsty-Mate Hand Pump With Hose - 224Pf - 35-224Pff1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump With Hose - 136Pf-6 - 35-136Pf6F1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump With Hose - 136Pf - 35-136Pff1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump With Hose - 124Pf6 - 35-124Pf6F1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.
Beckson Thirsty-Mate Hand Pump With Hose - 124Pf - 35-124Pff1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate Hand Pump With Hose - 118Pf - 35-118Pff1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.
Beckson Thirsty-Mate Hand Pump 1-1/4 X 18" With 20" Tube - 118Ph - 35-118Phf1
Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA.
Beckson Thirsty-Mate 6' Intake Extension Hose f/124, 136 & 300 Pumps
Beckson Thirsty-Mate 4' Intake Extension Hose f/124, 136 & 300 Pumps
Beckson Soft-Mate Winch Handle Holder, White - Hh2 - 35-Hh2F1
Safety-Soft, flexible P.V.C. Designed for winch handles, top action, standard or ratchet
Beckson Soft-Mate Winch Handle Holder, White - Hh-3 - 35-Hh3F1
Safety-Soft, flexible P.V.C. Designed for winch handles, top action, standard or ratchet
Beckson Soft-Mate Hand Hell Radio/Cell Phone Holder, White - Hh-81 - 35-Hh81F1
Perfect for radios, GPS and cellular phones.
Beckson Soft-Mate Hand Hell Radio/Cell Phone Holder, White - Hh-8 - 35-Hh8F1
Soft vinyl material. Design to hold hand held radios or phones. Perfect for storage on board any vehicle. White.
Beckson Soft-Mate Can And Air Horn Holder, White - Hh-6 - 35-Hh6F1
HH6: Safety-soft flexible material prevents injuries. Designed to hold beverage cans, bottles, air horns, etc. Uses screws to mount.
Beckson Soft-Mate Beverage Holder, White - Hh61 - 35-Hh61F1
HH61: This is a two step model, molded from soft flexible material. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount.
Beckson Soft-Mate Beverage Holder, Black - Hh-61B - 35-Hh61Bf1
HH61: This is a two step model, molded from soft flexible material. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount.
Beckson Soft Cowl Vent 4-7/8" W X 5-1/8" D X 2" H, White - Sc-7 - 35-Sc7F1
PVC. Ideal for areas where vent will be under foot or foul lines.
Beckson Sea Kayak With Float-A-Pump Sleeve 1-3/4 X 18", 8 Gpm - 318P1Fps3R - 35-318P1Fps3Rf1
Float-A-Pump sleeve. Designed specifically with the sea-kayaker in mind. Includes a reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't effect a compass.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp80B - 35-Dp80Bf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp80-W-C - 35-Dp80Wcf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp80-W - 35-Dp80Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp60-W-C - 35-Dp60Wcf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp60-W - 35-Dp60Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp60-B - 35-Dp60Bf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp40-W-C - 35-Dp40Wcf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp40-W - 35-Dp40Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Smooth Center - Dp40-B - 35-Dp40Bf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Dimple Center - Dp82W - 35-Dp82Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Dimple Center - Dp82B - 35-Dp82Bf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Dimple Center - Dp62-W - 35-Dp62Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Dimple Center - Dp42W - 35-Dp42Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Dimple Center - Dp42B - 35-Dp42Bf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Diamond Center - Dp84W - 35-Dp84Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Diamond Center - Dp84N - 35-Dp84Nf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Diamond Center - Dp64-W - 35-Dp64Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Diamond Center - Dp64-N - 35-Dp64Nf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw Out Deck Plate With Standard Trim Ring, Diamond Center - Dp44W - 35-Dp44Wf1
Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
Beckson Screw On Vent Hose Adapter, 4" - Sa-4 - 35-Sa4F1
Designed for attaching ventilation hose to deck for use with Beckson "C" series vents.
Beckson Screen For Self Drain Opening Port - Scr512 - 35-Scr512F1
Screen for Beckson PO512 series opening ports.
Beckson Replacement Safety Twist Knobs Only 1/4-20 Black (2 Per Pack) - Prtb - 35-Prtbf1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a White body and a clear window. 1" spigot.
Beckson Replacement O-Ring For Deck Plate - D8P-G - 35-D8Pgf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Replacement O-Ring For Deck Plate - D6S-G - 35-D6Sgf1
6" O-Ring For Screw-In Deck Plate
Beckson Replacement O-Ring For Deck Plate - D6P-G - 35-D6Pgf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Replacement O-Ring For Deck Plate - D4S-G - 35-D4Sgf1
4" O-Ring For Screw-In Deck Plate
Beckson Replacement Hook Only For Hook-Mate Boat Hooks, Red - Hmr - 35-Hmrf1
Strong, lightweight and have non-conductive plastic clad design which floats. Vinyl clad shaft will not splinter or crack. Unique double-ball design permits pushing, pulling and retrieving without slipping. Guaranteed for 5 years. Red handle.
Beckson Rain Drain Opening Port - Po714Dwc20 - 35-Po714Dwc20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po714Dwc10 - 35-Po714Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dws10 - 35-Po512Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc20 - 35-Po512Dwc20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dwc10 - 35-Po512Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po512Dbs20 - 35-Po512Dbs20F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po414Dws10 - 35-Po414Dws10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Rain Drain Opening Port - Po414Dwc-10 - 35-Po414Dwc10F1
Rain Drain™ opening ports are designed primarily for installation where cabin sides have excessive angles and other ports would collect rain and spray. Rain drain ports can be mounted on vertical surfaces with no more than 45° from center. The port, cut at 5/8", will drain while tipped up to 45° degrees. Unlike others, Beckson Rain Drain™ Ports have open drains which resist clogging and are easy to clean. The spigot is the integral part of the frame which passes through the cabin wall.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - Dp61-W - 35-Dp61Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Smooth Center - 35-Dp81W - 35-Dp81Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-W - 35-Dp83Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp83-B - 35-Dp83Bf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Dimple Center - Dp63-W - 35-Dp63Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85N - 35-Dp85Nf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp85-W - 35-Dp85Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp65W - 35-Dp65Wf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Pry-Out Deck Plate With Standard Trim Ring, Diamond Center - Dp65-N - 35-Dp65Nf1
An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners.
Beckson Po714-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po714Wc10 - 35-Po714Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po512-Ws-10 Self-Drain™ Opening Port, White W/Smoke Lens - Po512-Ws-10 - 35-Po512Ws10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po512-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po512-Wc-10 - 35-Po512Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Po410-Wc-10 Self-Drain™ Opening Port, White W/Clear Lens - Po410Wc10 - 35-Po410Wc10F1
Designed with drain molded on inside of spigot. Promotes drainage without angle cuts in hull. Allow for thru-bolting. Seats tightly against gasket and lens omitting internal water retention ledge. No water fall when opening after a rain. Ideal for mounting where installation is within 15° of vertical or where no drain is necessary. Patented. All self-drain ports have a white body and a clear window. 1" spigot.
Beckson Pf128 Newport Parallelogram Fixed Port, Black Body, Smoked Lens (2 Per Box) - Pf128Bs - 35-Pf128Bsf1
Non-opening and watertight. Black body with smoked lens.
Beckson Pf100 Newport Oval Flex-Port, Smoked Lens, Black Trim Ring - Pf100Sb - 35-Pf100Sbf1
One piece construction for flat or curved surfaces. Smoked lens with Black interior trim ring.
Beckson Memory-Mate Log Book, Soft Vinyl Cover, Assorted Colors - Mm403 - 35-Mm403F1
Soft vinyl cover, spiral bound. Pages for trip, log, radio, guests, maintenance. Size 8-1/2" x 11". Assorted colors.
Beckson Inline Check Valve For 1-1/2" Hose - Cv-1-1/2 - 35-Cv112F1
For 1-1/2" flexible hose to reduce back pressure and facilitate easier pumping.
