Select Category

For lighter duty applications where an outside corner is not necessary. Variations More Details

Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are ... More Details

Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are ... More Details

Used to help secure the dock in place. May also replace Corner Plate when extra strength is required. Variations More Details

Use to cover raw leg pipe edges. Gives dock the finishing touch. 4-Pack. Variations More Details

All DockEdge heavy duty floating dock hardware is 5 gauge (1/4" nominal). Hot dip galvanized steel with 9/16" hole. Engineered for use with Howell™ and DockEdge dock floats. Part #:686-91112FManufactu... More Details

Polyethylene and filled with closed cellular foam for long life under the most extreme marine conditions. Resistant to fire, oil and gas. Molded in UV Inhibitors and Fungicides. Part #:686-90027FManuf... More Details

32" wide support arms fits 2 kayaks, canoes, pdl, surf boards, etc. Adjustable locking straps, with locking hook at one endSupports many times the weight of an average kayak2' spacing lower rackTop ra... More Details

Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin. Variations More Details

Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability. Variations More Details

Used to connect Hybrid Dock Kit sections together Strong aluminum constructionRubber insert to alleviate hinge noiseEasily installs on aluminum frame Variations More Details

Designed and engineered for safety and stabilityTIG welded aluminum frame (alloy 6005/6061)Aluminum hardwareGalvanized steel posts 1-11/16" (42.9mm) diameterProtective post capsStainless steel (304) n... More Details

Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 side leg holders and 4 backer plates. 11 Gauge 1/8" ... More Details

For stationary dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 3/8" carriage bolts, lock washer and nuts (n... More Details

For floating dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 1/2" carriage bolts, lock washer and nuts (not... More Details

Includes all mounting hardware required to securely attach Dock 2 Go modular dock sections together. Kit includes 2 Male T connectors, 2 Female T connectors, 2 connector Pins and 4 Backer Plates. 4 Ga... More Details

Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides ... More Details

Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides ... More Details

Featuring specially reinforced heavy-duty integral lugs for added strength and longer durability. These fenders provide maximum protection and value for your dollar. Part #:686-59166FManufacturer:DOCK... More Details

35" Solar Sentinel The Solar Sentinel is a solar station, which is not only attractive but also adds value and function to your docking area. Each Solar Sentinel incorporates stylish, durable solar li... More Details

constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not inclu... More Details

3 Piece Dock Bumper Kit - 1 Corner Piece, 2 18" Straight Pieces This roto-molded bumper kit is fabricated from soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft... More Details

Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface. Variations686-DE2804F... More Details

Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface. Variations686-DE2804F... More Details

Cast from Almag and powder coated to last. Distinctive and highly functional, they are available to suit any requirement. Part #:686-2504WFManufacturer:DOCK EDGEManufacturer Part #:DE2504WFUPC:7761132... More Details

Sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with... More Details

Injection molded high density polyethylene and U.V. stabilized. Part #:686-2308FManufacturer:DOCK EDGEManufacturer Part #:DE2308FUPC:776113230800Order In Multiples Of:1Length8"MaterialBlack Plastic Va... More Details

Injection molded high density polyethylene and U.V. stabilized. Part #:686-2306FManufacturer:DOCK EDGEManufacturer Part #:DE2306FUPC:776113230602Order In Multiples Of:1Length6"MaterialBlack Plastic Va... More Details

Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting ... More Details

Recessed Mount. 5 year warranty.Package Includes: Tabletop2-3/8" x 27" Locking Post (3660527)2-3/8" Anodized Table Mount (3660018)2-3/8" Anodized Table Base (3660017)2-3/8" Anodized Table Base (366001... More Details

Recessed Mount. 5 year warranty.Package Includes: Tabletop2-3/8" x 27" Locking Post (3660527)2-3/8" Anodized Table Mount (3660018)2-3/8" Anodized Table Base (3660017)2-3/8" Anodized Table Base (366001... More Details

Recessed Mount. 5 year warranty.Package Includes: Tabletop2-3/8" x 27" Locking Post (3660527)2-3/8" Anodized Table Mount (3660018)2-3/8" Anodized Table Base (3660017)2-3/8" Anodized Table Base (366001... More Details

Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cr... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats. Part #:686-1134FManufacturer:DOCK ED... More Details

Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as w... More Details

Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as w... More Details

Extruded with flexible PVC material, designed to be used to trap air and act as an air cushion. Excellent for use on all docks. 3 x 8' sections totaling 24', easy to mount. 1-1/2" Protrusion (2-1/4" O... More Details

Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 3 x 8' sections totaling 24', with a mounting line, easy to mount. Slanted face is designed... More Details

Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cr... More Details

For use with Single "P" profiles only. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System. Part #:686-1052FManufacturer:DOCK EDGEManufacturer Part #:DE1052FUPC:77611310520... More Details

Ideal for cementing all corners, end plugs and connectors to Air Cushion profiles to create the Air Cushion system. May be subject to shipping restrictions. Part #:686-1051FManufacturer:DOCK EDGEManuf... More Details

Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System. Part #:686-1048NFManufacturer:DOCK EDGEManufacturer Part ... More Details

Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System. Part #:686-1048FManufacturer:DOCK EDGEManufacturer Part #... More Details

Connect Air Cushion™ profiles. Use wth DockEdge+ End Plugs, Corners and PVC solvent for Air Cushion System. Part #:686-1028FManufacturer:DOCK EDGEManufacturer Part #:DE1028FUPC:776113102800Order In Mu... More Details

Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System. Part #:686-1027FManufacturer:DOCK EDGEManufacturer Part #:DE1027FUPC:776113102701Order In ... More Details

Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System. Part #:686-1026FManufacturer:DOCK EDGEManufacturer Part #:DE1026FUPC:776113102602Order In ... More Details

Developed specifically for AIR CUSHION™ spot protection. Like having a fender mounted where its needed the most. Mount vertically or horizontally on docks or boat houses. Molded in UV inhibitors and f... More Details

Ensures peace of mind for any runabout or personal watercraft owner. Install on any horizontal or vertical surface. 1-1/2" Protrusion x 3-1/8" Overall height. Part #:686-1004FManufacturer:DOCK EDGEMan... More Details

Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs o... More Details

"C" Guard (4) 6' Sections - 24' - White The economy "C" Guard co-extruded Profiles are made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. Ideal for light to medium dut... More Details

Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will no... More Details

'TOON Pontoon Boat Fender - 36" - Gray Complete patented pontoon boat protection system with up to 15" of vertical adjustment for any docking or rafting conditions. Dual hook system locks firmly top a... More Details

Fender 'TOON Accessory Kit Dock Edge's Fender 'TOON Accessory Kit Product Specifications Dimensions6" L × 3" W × 1" HShipping Weight0.15 lbCountry of OriginCANADAHarmonized Code3926.90.00.00 More Details

Variations More Details

Variations More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB6YManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB6RManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB6BLManufacturer... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB6BKManufacturer... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB6OManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB5RManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB5BLManufacturer... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB5BKManufacturer... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB4YManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB4RManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB4OManufacturer:... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB4BLManufacturer... More Details

The dock line that ... STRETCHES. Hook one end to your boat cleat, stretch other end to dock cleat and slide adjustment tubes up tight. Comes in assorted sizes and colors. Part #:613-DB4BKManufacturer... More Details

Winterizing kit quickly and easily adds antifreeze to inboard and outboard engines. Kit will also descale engine cooling systems. Removes marine growth to keep your engine running cool. Variations74-3... More Details

Winterizing kit quickly and easily adds antifreeze to inboard and outboard engines. Kit will also descale engine cooling systems. Removes debris to keep your engine running cool. All you need is a hos... More Details

Allows flushing and preparation of your inboard/outboard engine for winter storage with just five gallons of anti-freeze (not included) and your flusher. Your engine can be winterized right on the tra... More Details

DMX Touch Panel Controller lets you control the color of your Pro Series HD Colours underwater lights at the touch of a button. This touch sensitive intelligent control keypad enables the user to choo... More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Variations More Details

Part #:16-14830Manufacturer:DUTTON-LAINSONManufacturer Part #:14830UPC:085077148305Order In Multiples Of:1Hub1-1/8"Max Advantage229Gear Ratio17.3:1/5.4:1Max Load2500 lbs. w/ brakeHandle9-1/2"Diameter:... More Details

Part #:16-14914Manufacturer:DUTTON-LAINSONManufacturer Part #:14914UPC:085077149142Order In Multiples Of:1Hub1-7/8"Cable Size3/16" x 68'MMA29.9Gear Ratio4.4:1Max Load800 lbs.Handle7"Diameter: Hub1-7/8... More Details

Part #:16-14125Manufacturer:DUTTON-LAINSONManufacturer Part #:14125UPC:085077141252Order In Multiples Of:1Hub5/8"Max Advantage57Gear Ratio3.2:1Max Load600 lbs.Handle7"Diameter: Hub5/8"Length: Winch Ha... More Details

Part #:16-14881Manufacturer:DUTTON-LAINSONManufacturer Part #:14881UPC:085077148817Order In Multiples Of:1Hub1-5/16"Max Advantage135Gear Ratio12:1/6:1Max Load3500 lbs. w/ brakeHandle9-1/2"Diameter: Hu... More Details

Part #:16-14825Manufacturer:DUTTON-LAINSONManufacturer Part #:14825UPC:085077148251Order In Multiples Of:1Gear Ratio17.3:1/5.4:1Max Load2500 lbs.Diameter: Hub1-1/8"Length: Winch Handle9-1/2"Max Advant... More Details

Part #:16-14730Manufacturer:DUTTON-LAINSONManufacturer Part #:14730UPC:085077147308Order In Multiples Of:1Hub1-1/8"Max Advantage168Gear Ratio12.4:1/5.4:1Max Load2000 lbs. w/ brakeHandle9-1/2"Diameter:... More Details

Part #:16-14725Manufacturer:DUTTON-LAINSONManufacturer Part #:14725UPC:085077147254Order In Multiples Of:1Gear Ratio12.4:1/5.4:1Max Load2000 lbs.Diameter: Hub1-1/8"Length: Winch Handle9-1/2"Max Advant... More Details

Part #:16-14627Manufacturer:DUTTON-LAINSONManufacturer Part #:14627UPC:085077146271Order In Multiples Of:1Hub1-1/8"Max Advantage73Gear Ratio10.3:1/5.4:1Max Load1800 lbs.Handle9-1/2"Diameter: Hub1-1/8"... More Details

Part #:16-14527Manufacturer:DUTTON-LAINSONManufacturer Part #:14527UPC:085077145274Order In Multiples Of:1Hub1-1/8"Max Advantage75Gear Ratio5.4:1Max Load1600 lbs.Handle9-1/2"Diameter: Hub1-1/8"Length:... More Details

Part #:16-15305Manufacturer:DUTTON-LAINSONManufacturer Part #:15305UPC:085077153057Order In Multiples Of:1Gear Ratio4.4:1Max Load1400 lbs. (with 20'strap installed)Diameter: Hub7/8"Length: Winch Handl... More Details

Part #:16-15303Manufacturer:DUTTON-LAINSONManufacturer Part #:15303UPC:085077153033Order In Multiples Of:1Hub7/8"Max Advantage74Gear Ratio4.4:1Max Load1400 lbs.Handle9-1/2"Diameter: Hub7/8"Length: Win... More Details

Part #:16-15191Manufacturer:DUTTON-LAINSONManufacturer Part #:15191UPC:085077151916Order In Multiples Of:1Hub7/8"Max Advantage49Gear Ratio3.7:1Max Load1100 lbs. w/ strapHandle7"Diameter: Hub7/8"Length... More Details

Part #:16-15103Manufacturer:DUTTON-LAINSONManufacturer Part #:15103UPC:085077151039Order In Multiples Of:1Hub7/8"Max Advantage49Gear Ratio3.7:1Max Load1100 lbs.Handle7"Diameter: Hub7/8"Length: Winch H... More Details

Dual-duct kit can be used either on a new or retrofit installation and allows the air conditioning to be ducted to a secondary area like a head or anywhere else you want additional cooling. Includes "... More Details

Dual-duct kit can be used either on a new or retrofit installation and allows the air conditioning to be ducted to a secondary area like a head or anywhere else you want additional cooling. Includes "... More Details

Variations More Details