Welcome to NorthernMarine.ca

C.E. Smith 27638 Pvc Post Guide-Ons - 27638 - 618-27638F1

C.E. Smith, Miscellaneous

$529.24

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27637 Pvc Post Guide-Ons, 65", Hot Dip Galvanized - 27637 - 618-27637F1

C.E. Smith, Miscellaneous

$529.24

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27627 Pvc Post Guide-Ons, 40", 75 Degree Bend, White - 27627 - 618-27627F1

C.E. Smith, Miscellaneous

$181.24

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights

C.E. Smith 27610 Roller Guide-Ons, Pair - 27610 - 618-27610F1

C.E. Smith, Trailer Parts

$224.74

Smooth rolling guides assist in centering the boat onto the trailer. Ideal for retrieving boat on shallow ramps where the trailer is not far into the water, when alone, or have a crosswind or current pushing the boat. Uprights with rollers come fully assembled, ready for installation. Sold in pairs. 1-1/2" Pre-galvanized steel uprights lean outward 15° to cradle the boatGuide-Ons are 21" tall above the frame with 9" roller & 2" roller caps at top & bottomMounting hardware included for frames up to 3" W x 4-1/4"HMouting brackets allow up to 13" of adjustment out from each side of the frame

C.E. Smith 27580 Outboard Motor Dolly, Red - 27580 - 618-27580F1

C.E. Smith, Miscellaneous

$441.29

Easily transport motors weighing up to 250 lbs45" Overall heightFolds flat for convenient storage

C.E. Smith 27575 Pwc Dolly, 34" W X 48" L X 19" H - 27575 - 618-27575F1

C.E. Smith, Miscellaneous

$601.74

Ideal for moving a small vessel such as a Jet Ski, Jon Boat, Small Sailboat, Dingy, or Inflatable around on any hard surface. Great for moving a vessel into a storage space or as a vessel display platform in a showroom. 1-1/2" square galvanized steel tubingRugged 4" castersTopped with 4' long carpeted bunks that adjust to gently support the vesselBunk spacing can be set at 12", 16" or 20"1,000 lb capacity

C.E. Smith 27310G Heavy-Duty Galvanized Spare Tire Carrier - 27310G - 618-27310Gf1

C.E. Smith, Miscellaneous

$86.99

Mount your spare tire vertically to the side of trailer tongue or frame rails. The trailer tongue in the front of the trailer. The offset design moves the tire and wheel up and away from the trailer frame to improve ground clearance. No drilling is required to install the carrier because the included U-bolts clamp the carrier to the trailer frame. The crisscross design increases the holding power of the U-bolts. Mouting u-bolts may be crossed to fit shorter frames or may be installed parallel for more reach. Offset height raises tire and provides additional ground clearance3/16" thick galvanized steelHolds either 4 or 5 lug wheels that are up to 15"Fits frames up to 4" tall by 1" up to 3-1/2" wide

C.E. Smith 27115 Bearing Kit, 1-1/6" To 1-3/8" Tapered, 2.56" Id Inner, 1.98" Outter Hub - 27115 - 618-27115F1

C.E. Smith, Trailer Parts

$36.29

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27113 Bearing Kit, 1-1/4" Straight Spindle, 2.32" Id Inner And Outter Hub - 27113 - 618-27113F1

C.E. Smith, Fasteners & Hardware

$36.29

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27112 Bearing Kit, 1-1/16" Straight Spindle, 1.98" Id Inner And Outter Hub - 27112 - 618-27112F1

C.E. Smith, Fasteners & Hardware

$36.29

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27111 Bearing Kit, 1" Straight Spindle, 1.98" Id Inner And Outter Hub - 27111 - 618-27111F1

C.E. Smith, Fasteners & Hardware

$36.29

Each set outfits one wheel. Includes outer and inner.