Select Category
_0x200.jpg)
Sea-Dog 2019161 Semi-Concealed Stainless Hinges, Pr. - 201916-1 - 354-2019161F1
Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.
Sea-Dog 2019141 Semi-Concealed Stainless Hinges, Pr. - 201914-1 - 354-2019141F1
Semi-concealed hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door. All hinges require #6 RH screws.
Sea-Dog 2018011 Locker Hinge, 2-7/8", Carded - 201801-1 - 354-2018011F1
Heavy duty hinges constructed of corrosion resistant, stamped 304 stainless steel to withstand the harsh marine environment. Installs with FH fasteners (not included).
Sea-Dog 2018001 Locker Hinge, 2-7/8", Carded - 201800-1 - 354-2018001F1
Heavy duty hinges constructed of corrosion resistant, stamped 304 stainless steel to withstand the harsh marine environment. Installs with FH fasteners (not included).
Sea-Dog 2017251 Flush Mount Round Side Door Hinge - 201725-1 - 354-2017251F1
Stamped 304 Stainless Steel.
Sea-Dog 2017201 Round Side Door Hinge - Long - 201720-1 - 354-2017201F1
Stamped 304 Stainless Steel.
Sea-Dog 201710 Round Side Door Hinge - Medium - 201710-1 - 354-2017101F1
Stamped 304 Stainless Steel.
Sea-Dog 2015901 Offset Butt Hinges, Stainless, 1 Pr. - 201590-1 - 354-2015901F1
Designed to be mounted on the front surface of a raised door. Constructed of corrosion resistant, stamped 304 stainless steel with countersunk holes. Installs with four #8 FH fasteners (not included).
Sea-Dog 201586 Take-Apart Hinges, Left - 201586 - 354-201586F1
Stamped 304 Stainless Steel.
Sea-Dog 201585 Take-Apart Hinges, Right - 201585 - 354-201585F1
Stamped 304 Stainless Steel.
Sea-Dog 2015701 Stainless Offset Short Side Hinge, 2/Pk - 201570-1 - 354-2015701F1
Constructed of corrosion resistant 304 stamped stainless steel, these Short Side Offset Door Hinges are designed to allow more open access by moving the pivot point of the door further away from the hinge. This simple solution provides extra clearance while avoiding the need to create a larger opening by installing a new door frame. Surface mounted on the front side of a raised door, they are used where the hinge does not need to be concealed. Installs with five #8 FH fasteners (not included).
Sea-Dog 201555 Round Side Two Pin Hinge, 3" (Carded) - 201555-1 - 354-2015551F1
Constructed of heavy duty 304 stainless steel. Opens 180°, making them ideal for folding tables or doors that must fold back flat. Good for use in tight spaces. Corrosion resistant to withstand the harsh marine environment. Installs with #8 FH fasteners (not included).
Sea-Dog 2015511 Stainless Flush 2-Pin Hinge - 201551-1 - 354-2015511F1
Constructed of heavy duty 304 stainless steel. Opens 180°, making them ideal for folding tables or doors that must fold back flat. Corrosion resistant to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Sea-Dog 201535 Flush Door Hinge - 201535-1 - 354-2015351F1
Stamped 304 Stainless Steel.
Sea-Dog 2015101 Stainless Door Hinge Short Side Door Hinge #8, 2/Cd - 201510-1 - 354-2015101F1
Stamped 304 stainless steel. #8 fastener.
Sea-Dog 2010811 Butt Hinges, A: 3" B: 1-1/2", C: 1-1/2" D:3" E: 1/16", #8 Fh - 201081-1 - 354-2010811F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they install with six #8 FH fasteners (not included).
Sea-Dog 201081 Stainless Butt Hinge, A: 3" B: 1-1/2", C: 1-1/2" D:3" E: 1/16", #8 Fh - 201081-1 - 354-201081F1
Stamped 304 stainless steel. #8FH Fastener.
Sea-Dog 2010801 Stainless Butt Hinge, A: 2" B:1" C:1", D:3" E: 1/16", #8 Fh - 201080-1 - 354-2010801F1
Stamped 304 stainless steel. #8FH Fastener.
Sea-Dog 2010721 Stainless Butt Hinge, 2" X 2" - 201072-1 - 354-2010721F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010711 Stainless Butt Hinge, 1-1/2" X 1-2" - 201071-1 - 354-2010711F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010701 Stainless Butt Hinge, 1-1/4" X 1-1/2" - 201070-1 - 354-2010701F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010201 Stainless Door Hinge Short Side Door Hinge #8, 2/Cd - 201020-1 - 354-2010201F1
These stamped 304 stainless steel short side hinges are corrosion resistant. Great for all interior and exterior applications such as cabinets, hatches, folding tables or seats where mounting space is tight. Installs with five #8 FH fasteners (not included).
Sea-Dog 198105 S-Hook - Plated Steel, 3/16" X 2-3/16" - 198105-1 - 354-1981051F1
Formed 304 Stainless Steel.
Sea-Dog 195320 Reefing Hook - 195320-1 - 354-1953201F1
Formed 304 Stainless Steel.
Sea-Dog 195310 Reefing Hook - 195310-1 - 354-1953101F1
Formed 304 Stainless Steel.
Sea-Dog 195210 Sail Lashing Hook - 195210-1 - 354-1952101F1
Formed 304 Stainless Steel.
Sea-Dog 195110 Cunningham Hook - 195110-1 - 354-1951101F1
Formed 304 Stainless Steel.
Sea-Dog 1935641 Split Ring 3/4" Ss 3/Cd - 193564-1 - 354-1935641F1
Stainless 316 wire.
Sea-Dog 1935631 Split Ring 5/8" Ss 4/Cd - 193563-1 - 354-1935631F1
Stainless 316 wire.
Sea-Dog 1935621 Split Ring 15/32" Ss 4/Cd - 193562-1 - 354-1935621F1
Stainless 316 wire.
Sea-Dog 193561 Split Ring 11/32" Ss, Bulk - 193561 - 354-193561F1
Stainless 316 wire.
Sea-Dog 192950 Galvanized Ring 5/8" X 5" - 192950 - 354-192950F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192940 Galvanized Ring 5/8" X 4" - 192940 - 354-192940F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192840 Galvanized Ring 1/2" X 4" - 192840 - 354-192840F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192830 Galvanized Ring 1/2" X 3" - 192830 - 354-192830F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192630 Galvanized Ring - 3/8" X 3" - 192630 - 354-192630F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192420 Galvanized Ring, 1/4" X 2" - 192420 - 354-192420F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192415 Galvanized Ring, 1/4" X 1-1/2" - 192415 - 354-192415F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192029 Stainless Steel Ring, 3/16" X 1-1/8" - 192029 - 354-192029F1
Die Cast Manganese Bronze.
Sea-Dog 192027 Stainless Steel Ring, 3/16" X 1-1/16" - 192027 - 354-192027F1
Die Cast Manganese Bronze.
Sea-Dog 191840 Stainless Steel D Ring - 191840 - 354-191840F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 191831 Stainless Steel D Ring - 191831 - 354-191831F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 191830 Stainless Steel D Ring - 191830 - 354-191830F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 191632 Stainless Steel Ring, 3/8" X 3-1/4" - 191632 - 354-191632F1
Formed 304 Stainless Steel.
Sea-Dog 191625 Stainless Steel Ring, 3/8" X 2-1/2" - 191625 - 354-191625F1
Formed 304 Stainless Steel.
Sea-Dog 191522 Stainless Steel Ring, 5/16" X 2-1/4" - 191522 - 354-191522F1
Formed 304 Stainless Steel.
Sea-Dog 191520 Stainless Steel Ring, 5/16" X 2" - 191520 - 354-191520F1
Formed 304 Stainless Steel.
Sea-Dog 191517 Stainless Steel Ring, 5/16" X 1-3/4" - 191517 - 354-191517F1
Formed 304 Stainless Steel.
Sea-Dog 191515 Stainless Steel Ring, 5/16" X 1-1/2" - 191515 - 354-191515F1
Formed 304 Stainless Steel.
Sea-Dog 191512 Stainless Steel Ring, 5/16" X 1/1/4" - 191512 - 354-191512F1
Formed 304 Stainless Steel.
Sea-Dog 191415 Stainless Steel Ring, 1/4" X 1-1/2" - 191415 - 354-191415F1
Formed 304 Stainless Steel.
Sea-Dog 191412 Stainless Steel Ring, 1/4" X 1-1/4" - 191412 - 354-191412F1
Formed 304 Stainless Steel.
Sea-Dog 191410 Stainless Steel Ring, 1/4" X 1" - 191410 - 354-191410F1
Formed 304 Stainless Steel.
Sea-Dog 191312 Stainless Steel Ring, 3/16" X 1-3/16" - 191312 - 354-191312F1
Formed 304 Stainless Steel.
Sea-Dog 191310 Stainless Steel Ring, 3/16" X 1" - 191310 - 354-191310F1
Formed 304 Stainless Steel.
Sea-Dog 191307 Stainless Steel Ring, 3/16" X 3/4" - 191307 - 354-191307F1
Formed 304 Stainless Steel.
Sea-Dog 191207 Stainless Steel Ring, 1/8" X 3/4" - 191207 - 354-191207F1
Formed 304 Stainless Steel.
Sea-Dog 190579 Round Ring - 1" White - 190579 - 354-190579F1
Injection molded nylon.
Sea-Dog 190571 Round Ring - 1-1/2" White - 190571 - 354-190571F1
Injection molded nylon.
Sea-Dog 190570 Round Ring - 2" White - 190570 - 354-190570F1
Injection molded nylon.
Sea-Dog 189705 Lifeline Pelican Hook - 189705 - 354-189705F1
Lifeline pelican hooks open with a pull of the quick release plunger then close automatically when pressed shut. Capable of being released under load these hooks are used as a removable fastener in lifeline applications where a gate is required. Constructed of investment cast 316 stainless steel for maximum corrosion resistance and durability
Sea-Dog 189700 Lifeline Pelican Hook - 189700 - 354-189700F1
Lifeline pelican hooks open with a pull of the quick release plunger then close automatically when pressed shut. Capable of being released under load these hooks are used as a removable fastener in lifeline applications where a gate is required. Constructed of investment cast 316 stainless steel for maximum corrosion resistance and durability
Sea-Dog 186131 Jaw & Jaw Turnbuckle, A:1/2"-20, B:12-1/2", C:18-1/2", D:3/8", E:5/8" - 186131 - 354-186131F1
Used for adjusting the tension and/or length of ropes and cables. Constructed of hot dipped galvanized forged steel for corrosion resistance. End fittings should be checked to ensure uninhibited universal movement.
Sea-Dog 185116 Jaw & Jaw Turnbuckle - 185116 - 354-185116F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185112 Jaw & Jaw Turnbuckle - 185112 - 354-185112F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185108 Jaw & Jaw Turnbuckle - 185108 - 354-185108F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185106 Jaw & Jaw Turnbuckle - 185106 - 354-185106F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 182210 Stainless Steel Eye & Jaw Swivel, 3/8" - 182210 - 354-182210F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly. We do not load rate cast swivels
Sea-Dog 181216 Galvanized Jaw & Eye Swivel, 5/8", Bulk - 181216 - 354-181216F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 1812121 Galvanized Jaw & Eye Swivel, 1/2", Carded - 181212-1 - 354-1812121F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 1812101 Galvanized Jaw & Eye Swivel, 3/8", Carded - 181210-1 - 354-1812101F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 181210 Galvanized Jaw & Eye Swivel, 3/8", Bulk - 181210 - 354-181210F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 181208 Galvanized Jaw & Eye Swivel, 5/16", Bulk - 181208 - 354-181208F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 173577 Standard Thimble, Black Nylon, 3/4" - 173577 - 354-173577F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173574 Standard Thimble, Black Nylon, 1/2" - 173574 - 354-173574F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173573 Standard Thimble, Black Nylon, 3/8" - 173573 - 354-173573F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173571 Standard Thimble, Black Nylon, 1/4" - 173571 - 354-173571F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173559 Standard Thimble, White Nylon, 1" - 173559 - 354-173559F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173557 Standard Thimble, White Nylon, 3/4" - 173557 - 354-173557F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173556 Standard Thimble, White Nylon, 5/8" - 173556 - 354-173556F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173554 Standard Thimble, White Nylon, 1/2" - 173554 - 354-173554F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173553 Standard Thimble, White Nylon, 3/8" - 173553 - 354-173553F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173552 Standard Thimble, White Nylon, 5/16" - 173552 - 354-173552F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173551 Standard Thimble, White Nylon, 1/4" - 173551 - 354-173551F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 171216 Stainless Steel Light Thimble, 5/8" - 171216 - 354-171216F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171212 Stainless Steel Light Thimble, 1/2" - 171212 - 354-171212F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171210 Stainless Steel Light Thimble, 3/8" - 171210 - 354-171210F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171208 Stainless Steel Light Thimble, 5/16" - 171208 - 354-171208F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 171206 Stainless Steel Light Thimble, 1/4" - 171206 - 354-171206F1
Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of corrosion resistant stamped 304 stainless steel these thimbles are ideal for general rigging applications.
Sea-Dog 159510 Stainless Wire Rope Clip, 10 Mm Wire Size - 159510-1 - 354-1595101F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595081 Stainless Wire Rope Clip, 8 Mm Wire Size - 159508-1 - 354-1595081F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595061 Stainless Wire Rope Clip, 6 Mm Wire Size - 159506-1 - 354-1595061F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595051 Stainless Wire Rope Clip, 5 Mm Wire Size - 159505-1 - 354-1595051F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595041 Stainless Wire Rope Clip, 4 Mm Wire Size - 159504-1 - 354-1595041F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1595021 Stainless Wire Rope Clip, 2 Mm Wire Size - 159502-1 - 354-1595021F1
Wire rope clips used in conjunction with thimbles offer an alternative to splicing for looping ends of wire rope. Constructed of corrosion resistant stainless steel, fittings consist of a U-bolt and saddle secured by two nuts. Recommended for use on uncoated wire rope. Not designed for overhead lifting applications. Metric threads.
Sea-Dog 1591061 Wire Rope Clamp, 1/4" - 159106-1 - 354-1591061F1
Zinc plated cast steel.
Sea-Dog 1591051 Wire Rope Clamp, 3/16" - 159105-1 - 354-1591051F1
Zinc plated cast steel.
Sea-Dog 1591031 Wire Rope Clamp, 1/8" - 159103-1 - 354-1591031F1
Zinc plated cast steel.
Sea-Dog 156160 Galvanized Steel Snap, 6-1/4" - 156160 - 354-156160F1
Mild steel electrogalvanized.
Sea-Dog 1561001 Galvanized Steel Snap, 3-15/16" - 156100-1 - 354-1561001F1
Mild steel electrogalvanized.
