Select Category
Seadog Waterproof Led Combination Bow Light | Uscg 1 Nm Approved | #8 Fastener | 67 Ip Rating - 400058-1 - 354-4000581F1
Black LED Combination Bow Light 400058 is approved for USCG 1 NM (Colreg 1 mile) and is constructed of injection molded ABS with a Zamak base. Installs with two #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Waterproof Led Combination Bow Light - Uscg 1 Nm Approved - #8 Fastener - 67 Ip Rating - 400059-1 - 354-4000591F1
Cast stainless steel base with stamped stainless steel cover. Approved for USCG 2 nautical miles. Use 2 #10 FH fasteners.
Seadog Wall Switch Panel W/2 Switches - 403020-1 - 354-4030201F1
Wall Switch Panel includes black SPDT switches rated at 15 amps each. 304 Stainless panel.
Seadog Wall Switch Panel W/1 Switch - 403010-1 - 354-4030101F1
Wall Switch Panel includes black SPDT switch rated at 15 amps each. 304 Stainless panel.
Seadog Vertical Mount Side Lights, 1 Pr. - 400160-1 - 354-4001601F1
Side Mount Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Vent Plug, 5/Pk - 337360-1 - 354-3373601F1
Vent Plugs are constructed of corrosion resistant injection molded nylon. Designed to press fit into a 1" diameter round hole. Ideal for venting areas that may be subjected to heat or moisture build-up. Vent area 0.11 in2.
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205275-1 - 354-2052751F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205270-1 - 354-2052701F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog T-Handle Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221972L - 354-221972Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog T-Handle Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 2" Diameter - 221972 - 354-221972F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Synchronized Wiper Controller - 414800-3 - 354-4148003F1
Synchronized Wiper Control will sync up to three motors and adds an interval speed position to the traditional two-speed motor. One short push takes the motors from interval, to slow, to fast speed. One long push activates the primary motor only. Capable of operating a washer system like the Sea-Dog® Windshield Washer Kit (414900-3). Includes synchronized controller, switch, and 5' wiring harness. Overload protected. CE Approved.
Seadog Swivel Drink Holder - 588130-3 - 354-5881303F1
Swivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Fits most cans, glasses, and mugs with handles. Chrome plated brass wire construction.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254324-1 - 354-2543241F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254318-1 - 354-2543181F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254312-1 - 354-2543121F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Stud Style Transom Mount Ski Tow - 371631-1 - 354-3716311F1
The Stud Style Transom Mount Ski Tow is constructed of AISI formed 316 stainless steel rod for corrosion resistance and durability. Designed to bolt through the transom for maximum strength.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254124-1 - 354-2541241F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254118-1 - 354-2541181F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254106-1 - 354-2541061F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428W-1 - 354-412428W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421W-1 - 354-412421W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428B-1 - 354-412428B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421B-1 - 354-412421B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412328B-3 - 354-412328B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412321B-3 - 354-412321B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412178B-3 - 354-412178B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412171B-3 - 354-412171B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412138W-3 - 354-412138W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412128W-3 - 354-412128W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412121W-3 - 354-412121W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412118W-3 - 354-412118W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412138B-3 - 354-412138B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412131B-3 - 354-412131B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412128B-3 - 354-412128B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412121B-3 - 354-412121B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412118B-3 - 354-412118B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412111B-3 - 354-412111B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431153-1 - 354-4311531F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431152-1 - 354-4311521F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431151-1 - 354-4311511F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400004-1 - 354-4000041F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400003-1 - 354-4000031F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Replacement Cap & Gasket - 325239-1 - 354-3252391F1
Fits 325175 & 325235 rod holders.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327361-1 - 354-3273611F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327359-1 - 354-3273591F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327357-1 - 354-3273571F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327161-1 - 354-3271611F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327160-1 - 354-3271601F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336382-1 - 354-3363821F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336380-1 - 354-3363801F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336362-1 - 354-3363621F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336360-1 - 354-3363601F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336387-1 - 354-3363871F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336385-1 - 354-3363851F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Pvc Coated Anchor Chain, 3/16" X 3' - 312933 - 354-312933F1
Forged steel hot dipped, galvanized construction with white vinyl PVC coating. This anchor lead chain features welded, over-sized end links for easy shackle attachment. White PVC coating provides corrosion resistance and boat surface protection. Recommended for use between the anchor and anchor line with fluke style anchors to increase holding power.
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412328W-3 - 354-412328W3F1
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm and blade combination (21" total length) using standard wiper arms. Fits the same footprint as most competitive standard (STD) wiper motors. White only. IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412321W-3 - 354-412321W3F1
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm and blade combination (21" total length) using standard wiper arms. Fits the same footprint as most competitive standard (STD) wiper motors. White only. IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412278W-3 - 354-412278W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412268W-3 - 354-412268W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412238W-3 - 354-412238W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412231W-3 - 354-412231W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412228W-3 - 354-412228W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412221W-3 - 354-412221W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412218W-3 - 354-412218W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412211W-3 - 354-412211W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412238B-3 - 354-412238B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412231B-3 - 354-412231B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412228B-3 - 354-412228B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412221B-3 - 354-412221B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412218B-3 - 354-412218B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412211B-3 - 354-412211B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401727-1 - 354-4017271F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Plastic Led 12V Dome Light With On / Off Switch | #8 Fastener - 401725-1 - 354-4017251F1
LED Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off rocker switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405693-1 - 354-4056931F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Plastic 12V Spot & Flood Light Second Control Station Hard Wired Remote - 405691-1 - 354-4056911F1
Wireless 2nd station remote for spot/flood lights. Require 12 volt connection. These controls are 12 volt and hard wired remotes.
Seadog Op273031 Replacement Screw For Deck Hinges - Op27303-1 - 354-Op273031F1
Screw for 2732501 & 2732711
Seadog Op27002 Release Pin For 270210, 270235 & 270245 - Op27002 - 354-Op27002F1
Release Pin for 270210, 270235 & 270245
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Screw for 270160, 270161, 270200, 270230 & 270240
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Maximum: 20A.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog Lift Handle - 221275-1 - 354-2212751F1
Investment Cast 316 Stainless. Use #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, White - 401405-1 - 354-4014051F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, Blue - 401409-1 - 354-4014091F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Edge Light, White - 401375-1 - 354-4013751F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Edge Light, Blue - 401379-1 - 354-4013791F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat. The large size works on cleats up to 24"! WLL - 2,185 lbs.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog Grab Handle, White - 227561-1 - 354-2275611F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Grab Handle, Black - 227560-1 - 354-2275601F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Flush Mount Stainless Steel Rod Holder - 325176-1 - 354-3251761F1
Flush Mount Rod Holders are constructed of corrosion resistant formed 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Seadog Flush Mount Combo Drink Holder W/Drain Fitting - 588065 - 354-588065F1
Flush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion resistant stamped 304 stainless steel.
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holdersHose holder and towel bar
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521130 - 354-521130F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521125 - 354-521125F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Dual Round Voltmeter - 421616-1 - 354-4216161F1
This digital dual voltmeter displays voltage for main and auxiliary batteries simultaneously. The compact size allows installation in a wide variety of locations. Red LED display. IP65 rating. Injection molded nylon.
Seadog Drain Tube Flaring Tool - 520290-1 - 354-5202901F1
Drain Tube Flaring Tools for installing 1" drain tubes. Can be used to install all of Sea-Dog® Drain Tubes (520210-520430). Handy item for any toolbox. Drain tube not included.
Seadog Double Pole Double Throw 8 Terminal Blade Light Tip 12V 15 Amp Toggle Switch - 420128-1 - 354-4201281F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog Deluxe Hand Held Rope Cutter - 300095-3 - 354-3000953F1
Easily cuts nylon, polyester, polypropylene and Dacron cordage and webbing Cuts and heat seals at the same timeReplaceable blade heats to 1100° Fahrenheit (600° Celsius) in less than 10 secondsBrass bristle cleaning brush, T-handle Allen wrench, and carrying case included10' heavy-duty grounded cordETL listed
Seadog Deck Step | Injection Molded Rubber & Stamped 304 Stainless - 328013-1 - 354-3280131F1
This Deck Step is lined with injection molded rubber to facilitate traction and framed by stamped 304 stainless steel for corrosion resistance and durability.
Seadog Combination Soft Bristle Brush & Squeegee - 491075-1 - 354-4910751F1
The Boat Hook Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This soft brush is constructed of injection molded nylon with a marine grade silicone rubber squeegee. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331350-1 - 354-3313501F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331340-1 - 354-3313401F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331335-1 - 354-3313351F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Chain Stopper Formed 304 Stainless Steel - 321825-1 - 354-3218251F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 5/16"- 3/8".
Seadog Chain Stopper Formed 304 Stainless Steel - 321820-1 - 354-3218201F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 3/16"- 1/4".
Seadog Cast Polished Brass Bell | #6 Fastener - 455721 - 354-455721F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455720 - 354-455720F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Mirror polished brass finish.
Seadog Cast Polished Brass Bell - #6 Fastener - 455001 - 354-455001F1
These Bells are constructed of improved cast brass (not lower grade spun brass). Meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4") to 20m (65.6") in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205246 - 354-205246F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205244 - 354-205244F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205243 - 354-205243F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205242 - 354-205242F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Buss Bar Stud Terminal, 250A - 426738-1 - 354-4267381F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 150A - 426728-1 - 354-4267281F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Buss Bar Stud Terminal, 100A - 426718-1 - 354-4267181F1
These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).
Seadog Bow Chocks - 316 Stainless Steel - 060043-1 - 354-0600431F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Bow Chocks - 316 Stainless Steel - 060040-1 - 354-0600401F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Bilge Water Alarm Panel W/Pump Switch - 423035-1 - 354-4230351F1
Provides an audible and visual means of warning if the water level in your bilge is beyond your bilge pump float switch level. There is no need for a separate bilge pump switch as the control switch selects between automatic and manual (momentary on) function of the bilge pump. Rated at 15 Amps.Not for use with pumps that have built-in switches.
Seadog Berth Light - 400400-1 - 354-4004001F1
This Birth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182612-1 - 354-1826121F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182608-1 - 354-1826081F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog All Around Light - 400020-1 - 354-4000201F1
Injection molded polycarbonate/stamped stainless steel. Fastener #6 RH.
Seadog Adjustable Wiper Arm - Hook Style, 19"-24" - 413174B-1 - 354-413174B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 13"-18" - 413168B-1 - 354-413168B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 19"-24" - 413274B-1 - 354-413274B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 13"-18" - 413268B-1 - 354-413268B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413124B-1 - 354-413124B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413114B-1 - 354-413114B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413111B-1 - 354-413111B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327124-1 - 354-3271241F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Rail Mount Flagpole | Injection Molded Nylon / Stainless - 327122-1 - 354-3271221F1
Rail mount flagpole made of highly polished, heavy wall stainless steel tubing. The flag is attached to the flagpole using nylon pennant mounts with stainless steel spring wire quick release clips which are designed to hold their shape after continued use. Both pennant mounts can move either direction on the flagpoles allowing flexibility in mounting various sizes of flags.328190 Nylon Adjustable Flag Pole Mounts328195 Stainless Flag Pole Hole Mount Pennant Clips
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413319-1 - 354-4133191F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413317-1 - 354-4133171F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - 304 Stainless Steel - Black Finish - 413322-1 - 354-4133221F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Formed 304 stainless steel construction.
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 6725601 Fender Hook, Sold Each - 672560-1 - 354-6725601F1
This Fender Hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" line. The spring loaded hook keeps line captive against surface. Constructed of corrosion resistant investment cast 316 stainless steel with rubber gasket. Requires two #8 FH fasteners (not included).
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 660020 Impeller Puller | 3-3/4" X 6-3/8" X 7/16" | Investment Cast 316 Stainless - 660020-1 - 354-6600201F1
Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 588250 Stainless Steel Drink Holder - Adjusts For Containers With 2-3/8" To 3-7/8" Diameter. #8 Fastener - 588250-1 - 354-5882501F1
Adjustable Folding Drink Holder folds to a closed depth of 3/4. Accommodates drink containers up to 3-7/8" in diameter. Corrosion resistant stamped 304 stainless steel construction. Installs with two #8 RH fasteners (not included).
Seadog 588061N Flush Mount Combo Drink Holder W/Drain Fitting, White - 588061N - 354-588061Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588060N Flush Mount Combo Drink Holder W/Drain Fitting, Black - 588060N - 354-588060Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 5825031 Portable Emergency 3 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582503-1 - 354-5825031F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 582501 Portable Emergency 5 Step Boarding Ladder, High-Visibility Orange Polycarbonate & Nylon Rope - 582501-1 - 354-5825011F1
These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 lbs.
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5801011 Adjustable Oar Collars - Fits Standard Oars - Injection Molded Polypropylene, 1 Pr. - 580101-1 - 354-5801011F1
These Adjustable Oar Collars fit standard oars, but can be trimmed for smaller ones. These collars cushion stroke, reduce noise, and prevent wear. Split cover makes it quick and easy to install with brass nails (included). Constructed of rugged, flexible polyethylene.
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
Seadog 5208501 Drip Guard For 520750 3/4 Thru-Hull - 520850-1 - 354-5208501F1
Thru-Hull Drip Guard fits Sea-Dog #520750 3/4 thru-hull. Stops ugly black streaks from staining the side of your boat. Made of Nitrile-Buna black rubber.
Seadog 5200861 Stainless Tee Handle Drain Plug, 1-1/4" - 520086-1 - 354-5200861F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200855 Stainless Tee Handle Drain Plug, 1", 25 Pc Display - 520085-5 - 354-5200855F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200851 Stainless Tee Handle Drain Plug, 1" - 520085-1 - 354-5200851F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stainless steel with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200821 Brass Tee Handle Drain Plug, 1-1/4" - 520082-1 - 354-5200821F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200805 Brass Tee Handle Drain Plug, 1", 30 Pc Display - 520080-5 - 354-5200805F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 5200801 Brass Tee Handle Drain Plug, 1" - 520080-1 - 354-5200801F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 520080 Brass Tee Handle Drain Plug, 1" Bulk - 520080 - 354-520080F1
T-Handle Drain Plug provides a leak proof seal. Turn the t-handle clockwise to lock in place, counter clockwise to release. Stamped brass with a nitrile rubber plug for corrosion and vibration resistance.
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included).
Seadog 517526 Straight 2" Style Sink Drain With Strainer - 517526-1 - 354-5175261F1
Sea-Dog sink drain with strainer includes 5/8" barb on drain.
Seadog 512120 Washdown Water Outlet | #8 Fastener | Brass Chrome Plated | Includes Cap & Chain - 512120-1 - 354-5121201F1
Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.
Seadog 512110 Fresh Water Inlet | #8 Fastener | Brass Chrome Plated | Includes Cap & Chain - 512110-1 - 354-5121101F1
Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water. Pipe size: 1/2" FIPT x 3/4" FGHT. Uses #8 fastener.
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units. Includes Yamaha adapter (8mm-1.25) fitting for Mercury (Japanese origin models), Yamaha, Nissan, Tohatsu, Honda.
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48" inlet and 80" outlet hoses. Oil flow 0.2 liters per minute. Diesel flow 1.5 liters per minute. 12VDC. 60W. Maximum run time 30 minutes.NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Seadog 492213 Flagpole 10 Degree Socket | #10 Fastener | Sand Cast Brass Chrome Plated - 492213-1 - 354-4922131F1
10° Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Seadog 491713 Flush Mount 25 Degree Flag Pole Socket | #12 Fastener | Investment Cast 316 Stainless - 491713-1 - 354-4917131F1
25° Flush Mount Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of investment cast 316 stainless. Installs with three #12 FH fasteners (not included).
Seadog 491115 Boat Hook Mooring Cover Support Crown 1" X 15' Webbing Strap Kit, Pack Of 3 Straps - 491115-1 - 354-4911151F1
These Boat Hook Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then clipping in and out later for ease of use.
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices.
Seadog 491055 Boat Hook Mooring Buoy Snap Kit - #8 Fastener - Cast 316 & 304 Stamped Stainless - 491055-1 - 354-4910551F1
The Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat.
Seadog 450110 Abs Housing Clamp On 12V Mount Fan | 5-5/16" X 4-1/4" X 4-5/8" - 450110-1 - 354-4501101F1
Clamp-On Mount Fan is constructed of impact resistant ABS plastic. Can be mounted almost anywhere. 6 foot cord plugs into a 12VDC power socket. Features an integral high/low speed switch. Amps: high 0.38A, low 0.28A. Watts: high 4.5W, low 3.4W.
Seadog 4451881 Fuse Block W/Negative Buss & Led Indicator Lights, 12-Terminals - 445188-1 - 354-4451881F1
Red LED lights indicate when fuse is blown or missingUses ATO/ATC & ATM fuses 1A-30AMain line terminal rating is 100A 32VDC max, with M5 metric threaded studsSingle line terminal rating is 30A 32VD, with M4 metric threaded studsTerminals are nickel plated copper with stainless steel screwsIncludes fuse block cover and 71 labelsInstalls with four #8 FH fasteners (not included)
Seadog 4429471 Led G4 Base Wafer Bulb, Vertical Pins - 442947-1 - 354-4429471F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4429421 Led G4 Base Wafer Bulb, Horizontal Pins - 442942-1 - 354-4429421F1
These G4 lamps feature 12 high quality LEDs that produce 200 lumens. Bi-pin base for easy plug and play installation. Mounted on one side of the disc, these LEDs offer direct 120° illumination with no wasted light. The equivalent of a 20-watt halogen bulb with an energy efficient 2.4-watt power consumption. Rated for 50,000 life hours. For use with 12VDC systems only. Nickel plated brass/plastic.
Seadog 4426431 Led G4 Base Bulb - 442643-1 - 354-4426431F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 18 high quality LEDs that produce 290 lumens. The equivalent of a 20W halogen bulb with an energy efficient 3W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 4426421 Led G4 Base Bulb - 442642-1 - 354-4426421F1
These Warm White LED G4 Base Bulbs features a bi-pin base with 13 high quality LEDs that produce 225 lumens. The equivalent of a 15W halogen bulb with an energy efficient 2W power consumption. These bulbs boast 360° omnidirectional light distribution and 50,000 service life hours. For use with 12VDC systems only.
Seadog 442444 Nickel Plated Brass 12 Led White Lights 12.8V 1 Watt All Around Festoon - 442444-1 - 354-4424441F1
Nickel Plated Brass. 12V, 80 mA. All Around LED Festoon is for interior installations only.
Seadog 442439 Nickel Plated Brass 8 Led White Lights 12.8V .7 Watt All Around Festoon - 442439-1 - 354-4424391F1
Nickel Plated Brass. 12V, 60 mA. All Around LED Festoon is for interior installations only.
Seadog 442436 Nickel Plated Brass 8 Led White Lights 12.8V .6 Watt All Around Festoon - 442436-1 - 354-4424361F1
Nickel Plated Brass. 12V, 55 mA. All Around LED Festoon is for interior installations only.
Seadog 442431 Nickel Plated Brass 4 Led White Lights 12.8V .4 Watt All Around Festoon - 442431-1 - 354-4424311F1
Nickel Plated Brass. 12V, 30 mA. All Around LED Festoon is for interior installations only.
Seadog 442142 Nickel Plated Brass 2 Led White Lights 12.8V .8 Watt Sealed Festoon - 442142-1 - 354-4421421F1
Nickel Plated Brass. 12V, 70 mA. LED Festoon is recommended for indoor use only.
Seadog 4421311 Nickel Plated Brass 1 Led White Lights 12.8V .5 Watt Sealed Festoon - 442131-1 - 354-4421311F1
Nickel plated brass. 12V, 40 mA. LED Festoon is recommended for indoor use only.
Seadog 4420421 Bayonet Base G4 Adapter, Double Contact - 442042-1 - 354-4420421F1
Nickel plated brass. Adapts any G4 bi-pin style halogen bulb to a BA15D double contact bayonet base for use in standard marine light sockets.
Seadog 4420411 Bayonet Base G4 Adapter, Single Contact - 442041-1 - 354-4420411F1
Nickel plated brass. Adapts any G4 bi-pin style halogen bulb to a BA15S single contact bayonet base for use in standard marine light sockets.
Seadog 4418911 Halogen Light Bulb, 1 Pr. - 441891-1 - 354-4418911F1
JC type, bi-pin, G4 style halogen bulbs. 20W, 700 candlepower. 12.8 VDC.
Seadog 4418901 Halogen Light Bulb, 1 Pr. - 441890-1 - 354-4418901F1
JC type, bi-pin, G4 style halogen bulbs. 10W, 350 candlepower. 12.8 VDC.
Seadog 4418161 Mr16 Halogen Bulb With Reflector, 12V, 10W - 441816-1 - 354-4418161F1
Bi-pin base MR-16 halogen bulbs with glass reflectors. 12.8 VDC.
Seadog 4410351 Bulb, Festoon - 441035-1 - 354-4410351F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.
Seadog 432520 Maxblast 20 Amp 121 Db 12V 11 Psi Dual 17" Trumpet Air Horn - Chrome Plated Brass - 432520-1 - 354-4325201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 432510 Maxblast 20 Amp 120 Db 12V 11 Psi Single 17" Trumpet Air Horn - Chrome Plated Brass - 432510-1 - 354-4325101F1
MaxBlast Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 120 decibels and a frequency (Hz) of 315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577054.
Seadog 431620 Compact 7 Amp 112 Db 12V Dual 16" Trumpet Horn - Stamped 304 Stainless - 431620-1 - 354-4316201F1
Compact Dual Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 110 decibels and a frequency (Hz) of 460±15/415±15, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577072.
Seadog 431610 Compact 3.5 Amp 110 Db 12V Single 14" Trumpet Horn - Stamped 304 Stainless - 431610-1 - 354-4316101F1
Compact Single Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 460±15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577071.
Seadog 431540 Maxblast 5 Amp 123 Db 24V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431540-1 - 354-4315401F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431530 Maxblast 2.5 Amp 118 Db 24V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431530-1 - 354-4315301F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431520 Maxblast 10 Amp 123 Db 12V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431520-1 - 354-4315201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431510 Maxblast 5 Amp 118 Db 12V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431510-1 - 354-4315101F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431430-1 Pontoon Boat 12V Mini Compact Horn W/Bracket - 431430-1 - 354-4314301F1
Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746.
Seadog 431410 Black Finish 3 Amp 107 Db Mini Compact Horn & Bracket | Powder Coated Steel | 3-5/16" X 3-5/8" X 4" - 431410 - 354-431410F1
Mini Compact Horn with Bracket is constructed of powder coated steel. Includes mounting bracket. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577067.
Seadog 431310 Black Finish Hidden Mount 3 Amp 107 Db Mini Compact Horn | Powder Coated Steel - 431310-1 - 354-4313101F1
Hidden Mount Mini Compact Horn is constructed of powder coated steel. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577068.
Seadog 431250 Drop In 4 Amp 111 Db Horn V.3 With Grills | Powder Coated Steel & Injected Molded Nylon - 431250-1 - 354-4312501F1
Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4" diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.
Seadog 431230 Drop In 4 Amp 108 Db Horn V.2 With Grills | Powder Coated Steel & Injected Molded Nylon - 431230-1 - 354-4312301F1
Drop-In Hidden Horn V.2 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 108 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577065.
Seadog 431210 Drop In 3 Amp 105 Db Horn V.1 With Grills | Powder Coated Steel & Injected Molded Nylon - 431210-1 - 354-4312101F1
Powder coated steel/injected molded nylon. Includes V.1 Horn meets ABYC standard A-23. For use on vessels under 39'.
Seadog 431125 Max Blast Twin Mini 6 Amp 12V Compact Horn - Stamped 304 Stainless Cover - 431125-1 - 354-4311251F1
MaxBlast Twin Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.
Seadog 4310503 Push Button Remote Wireless Horn Switch - 431050-3 - 354-4310503F1
Remote Wireless Momentary Push Button Horn Switch activates by pushing button transmitter to send a signal to the receiver to activate your existing horn. Receiver connects to your existing horn switch wiring for an easy installation. Transmitter button uses CR2032 battery (included) and installs to steering wheel center cap either by double back tape or two #8 fasteners (included). 12V, 20A Max.
Seadog 429930 Adjustable 24 To 12 Gauge Wire Stripper & Cutter Tool - Powder Coated Steel - 429930-1 - 354-4299301F1
This professional grade Adjustable Wire Stripper & Cutter tool is two tools in one. Self-adjusting and easy to use, it strips or cuts 24-10 gauge wire with ease. Constructed of powder coated steel. A great addition to any tool box.
Seadog 429920 Heat Shrink 22 To 10 Gauge Terminal Crimper Tool - Powder Coated & Stainless Steel - 429920-1 - 354-4299201F1
Premium Heat Shrink Crimper tool is designed for use with heat shrink terminals. This high end, single ratchet crimper strips and crimps wire from 22-10 gauge. Ratchet action ensures correct crimping pressure. Constructed of powder coated steel. A great addition to any tool box.
Seadog 429910 Deluxe 22 To 10 Gauge Terminal Crimper Tool - Powder Coated Steel - 429910-1 - 354-4299101F1
Deluxe Terminal Crimper tool is designed for use with standard nylon terminal connectors. This deluxe, double ratchet crimper strips and crimps wire from 22-10 gauge. Ratchet action ensures correct crimping pressure. Constructed of powder coated steel. A great addition to any tool box.
Seadog 429905 Spring Loaded Deluxe 22 To 10 Gauge Wire Stripper Crimper Tool - 429905-1 - 354-4299051F1
Deluxe Wire Stripper & Crimper tool is spring loaded and strips & crimps 22-10 gauge wire. Constructed of chrome plated steel. A great addition to any tool box.
Seadog 4269551 Sae Power Socket, Rear Nut Mount - 426955-1 - 354-4269551F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 7/8" hole with included locking nut.
Seadog 4269501 Sae Power Socket, Front Mount - 426950-1 - 354-4269501F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 3/4" hole w/ two #10 RH screws (not included).
Seadog 4269301 Sae Power Cable Power Plug Kit, 6" - 426930-1 - 354-4269301F1
The SAE type Polarized Electrical Plug Kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins. Includes two plugs, four heat shrink tubes, and four butt connectors allowing you to customize for your application. Max: 20A @ 12VDC.
Seadog 4269251 Sae Power Cable Ato/Atc Inline Fuse Holder, 12" - 426925-1 - 354-4269251F1
The SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. Features an ATO/ATC inline fuse holder (fuse not included). 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269201 Sae Power Cable Y-Splitter, 12" - 426920-1 - 354-4269201F1
The SAE type polarized electrical connector is a two-prong plug and socket Y-splitter connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269121 Sae Power Cable, 12' - 426912-1 - 354-4269121F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269061 Sae Power Cable, 6' - 426906-1 - 354-4269061F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269031 Sae Power Cable, 3' - 426903-1 - 354-4269031F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269011 Sae Power Cable, 1' - 426901-1 - 354-4269011F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4266933 Dual Buss Bar W/ Cover, 12 Terminals - 426693-3 - 354-4266933F1
Dual Buss Bar is designed for DC positive or negative distribution on one block or AC neutral and safety ground collection on one block. Constructed of corrosion resistant tin-plated Copper and ABS with a polycarbonate cover. Includes two 1/4"-20 stainless steel stud terminals and six #8-32 stainless steel screw terminals per buss. Requires four #8 FH fasteners (included). Maximum: 48VDC, 150A per buss; 300VAC, 150A per buss. CE, RoHS compliant.
Seadog 4266923 Buss Bar W/ Cover, 6 Terminals - 426692-3 - 354-4266923F1
Designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion resistant tin-plated Copper and ABS with a polycarbonate cover. Includes two 5/16"-18 stainless steel stud terminals and 6 #10-32 stainless steel screw terminals. Requires four #8 FH fasteners (included). Maximum: 48VDC, 300A; 300VAC, 300A. CE, RoHS compliant.
Seadog 4266913 Buss Bar W/ Cover, 4 Terminals - 426691-3 - 354-4266913F1
Designed for positive or negative DC distribution or collection of AC neutral or safety ground circuits. Constructed of corrosion resistant tin-plated Copper and ABS with a polycarbonate cover. Includes four 5/16"-18 stainless steel stud terminals. Requires four #8 FH fasteners (included). Maximum: 48VDC, 300A; 300VAC, 300A. CE, RoHS compliant.
Seadog 426671 Brass & Molded Bakelite 10 Gang Terminal 5-3/4" Buss Bar | #10 Fastener - 426671-1 - 354-4266711F1
Electrical Buss Bars provide a convenient way to connect electrical wires, prevent shorts, eliminate splicing, tidy up wire harnesses, and conserve panel space. Non-fused, these distribution blocks are used primarily for routing and connecting power or ground circuits. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with two #10 FH fasteners (not included).
Seadog 4265351 Surface Mount Usb 3.0 & Usb-C Power Socket, Oval - 426535-1 - 354-4265351F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 4265311 Surface Mount Usb 3.0 & Usb-C Power Socket, Square - 426531-1 - 354-4265311F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 4265271 Double Usb Rocker Switch Style Voltmeter W/Hidden Display - 426527-1 - 354-4265271F1
This Dual USB Rocker Switch Style Voltmeter charges two devices simultaneously while also displaying the batteries output. Fits into any 13/16" x 1-7/16" rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Red LED display. IP65 rating.
Seadog 426520 Double Usb 12V To 24V Input Rocker Switch Power Socket - 426520-1 - 354-4265201F1
Dual USB Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16" x 1-7/16" rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265191 Rainbow Volt Meter W/Usb 3.0 & Usb-C Power Socket - 426519-1 - 354-4265191F1
Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for fast and flexible charging. Protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information. (Red/orange: voltage is too low. Green: normal). Reads voltage up to 14.6 volts. Includes On/Off button to conserve battery power when not needed. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100). Output DC: 5V/6A. Input: 8-32 VDC. IP65 rating. RoHS compliant.
Seadog 4265171 Double Usb Socket/Voltmeter W/Hidden Display - 426517-1 - 354-4265171F1
This Dual USB Socket charges two devices simultaneously while also displaying the batteries output. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Also fits Sea-Dog® Power Socket Shell (426100). Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Red LED display. IP65 rating.
Seadog 4265151 Double Usb 12V - 24V Input Power Socket - 426515-1 - 354-4265151F1
Dual USB Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Also fits Sea-Dog® Power Socket Shell (426100). Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265131 Double Usb Power Plug W/Voltage & Amp Meter - 426513-1 - 354-4265131F1
Double USB Power Plug charges two devices simultaneously while the LCD screen displays charging status in amps, battery voltage, and low voltage audible alarm. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle. Constructed of stamped stainless steel and injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED display.
Seadog 4265111 Usb 3.0 & Usb-C Power Socket With Voltmeter, A:1-7/16" B: 1-1/2" C:1-1/8", Volts: 8-32 - 426511-1 - 354-4265111F1
Charges two devices simultaneously while the LED displays voltage. Total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) to charge phones, pads, and tablets. USB-C features Power Delivery (PD) for faster, flexible charging. Protective dust cap. LED volt meter reads up to 14.6V. Injection molded nylon. Requires a 1-1/8" hole. Fits Sea-Dog® Power Socket Shell (4261001). Output DC: 5V/6A. Input: 8-32 VDC. Blue LED display. IP65 rating. RoHS compliant.
Seadog 4265101 Power Socket W/O Light -Usb 3.0 & Usb-C - 426510-1 - 354-4265101F1
USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105). Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Non-illuminated. IP65 rating. CE, RoHS compliant.
Seadog 426506-1 Double Usb & Power Socket Panel W/Breaker Switch - 426506-1 - 354-4265061F1
Double USB & Power Socket Panel with Breaker Switch charges two devices simultaneously. Featuring a 16A illuminating breaker switch it can accommodate both USB connectors and standard power sockets. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Maximum: 12V, 16A. Includes mounting screws and electrical connectors.
Seadog 426505 Double Usb 12V To 24V Input & Power Socket Panel | Includes Screws & Connectors - 426505-1 - 354-4265051F1
Double USB & Power Socket Panel charges two devices simultaneously. Can accommodate both USB connectors, as well as standard power sockets. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Maximum: 12V, 16A. Includes mounting screws and electrical connectors.
Seadog 426262 Polarized 3 Amp 2 Pin Electrical Outlet | #6 Fastener | Cast Brass & Chrome Plated - 426262-1 - 354-4262621F1
Constructed of chrome plated brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Seadog 4261421 Chrome Brass Polarized Cable Outlet & Plug - 426142-1 - 354-4261421F1
Polarized Electrical Outlet is constructed of chrome plated cast brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3A. 12 or 24VDC. Installs with two #6 RH fasteners (not included).
Seadog 4261061 Power Socket Rear Boot - 426106-1 - 354-4261061F1
PVC cover fits all power sockets and power socket meters. Protects wire connections and provides a finished appearance.
Seadog 4260131 Chrome Power Socket - 426013-1 - 354-4260131F1
Power Socket with Plate is ideal for installing additional power outlets. Chrome socket with a stamped 304 stainless steel mounting plate. Maximum: 12VDC, 16A. Installs with two #8 RH fasteners (not included).
Seadog 424636-1 Water Resistant Toggle Switch Panel W/6 Switches - 424636-1 - 354-4246361F1
Injection molded ABS/polycarbonate. Toggle switch panel rated @15A/12VDC with blue LED indicator lights, ATC fuse holders and decal sheet. Rated IP66.
Seadog 424627-1 Water Resistant Toggle Switch Panel W/5 Switches & Power Stocket - 424627-1 - 354-4246271F1
Injection molded ABS/polycarbonate. Toggle switch panel rated @15A/12VDC with blue LED indicator lights, ATC fuse holders and decal sheet. Rated IP66.Blue LED lighted power socket.
Seadog 424623-1 Water Resistant Toggle Switch Panel W/3 Switches & Power Stocket - 424623-1 - 354-4246231F1
Injection molded ABS/polycarbonate. Toggle switch panel rated @15A/12VDC with blue LED indicator lights, ATC fuse holders and decal sheet. Rated IP66.Blue LED lighted power socket.
Seadog 424617-1 Water Resistant Toggle Switch Panel W/5 Switches & Usb Power Stocket - 424617-1 - 354-4246171F1
Injection molded ABS/polycarbonate. Toggle switch panel rated @15A/12VDC with blue LED indicator lights, ATC fuse holders and decal sheet. Rated IP66.Blue LED lighted double USB power socket w/4.8A, (2.4A each).
Seadog 4246051 Water Resistant Switch Panel W/5 Toggle Switches, 12V Power Socket & Inline Fuse Holders & Decal Sheet - 424605-1 - 354-4246051F1
Water Resistant Toggle Switch Panel is constructed of injection molded ABS. Features four 15A 12VDC toggle switches, in-line fuse holders, and decal sheet.
Seadog 424116 Splash Gard Vertical 6 Gang Rocker Switch Panel, 6-1/2" X 4-1/2" - 424116-1 - 354-4241161F1
Fire resistant injection molded nylon. 6 illuminating switches. Not designed for total immersion. Panel rating: 12V/37 amps. Individual circuit: 10 amps max. Comes with mounting gasket and preprinted labels and fuses. Use #6 RH fasteners.
Seadog 423040 Bilge Pump Panel With Circuit Breaker - 2-3/16" X 3" - #6 Fastener - 423040-1 - 354-4230401F1
The Bilge Pump Panel with Circuit Breaker is constructed of injection molded ABS for maximum durability and corrosion resistance. This deluxe version features a three-way switch, allowing both automatic and manual switching of the bilge pump. When operated in the Manual mode, a red LED light is activated. When in the Automatic mode, a green LED light is activated. In addition, the panel is designed so the words Bilge Pump" will illuminate when back lit, allowing for easy location and operation at night. Includes UL listed 20A circuit breaker, allowing quick and easy resetting of the system.
Seadog 4230371 Bilge Pump Water Alarm Panel W/ Switch, 12V - 423037-1 - 354-4230371 Superseded By: 354-4230373F1
Bilge Pump Water Alarm Panel with Switch provides both an audible and visual notification of high-water levels. Low and High float switch monitoring in case of float switch failure. 20A ATO Fuse holder included. Constructed of injection molded ABS. Requires included gasket and four RH fasteners. Certification: CE, IP65.
Seadog 422800 Aluminum 6 Circuit Breaker Panel - 6-1/2" X 4-1/2" - Stamped Anodized Aluminum - 422800-1 - 354-4228001F1
Aluminum Breaker Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
Seadog 4227373 Power Box - Battery Switch, 12/24V, 50A - 422737-3 - 354-4227373F1
The Power Box is controlled with a 50A battery switch and is monitored with an LED voltmeter. Switch features a removable knob for extra security. Power box includes: two power sockets, two Anderson outputs, one USB-C, and four USB-A 2.4A ports. Features onboard internal fuse block. Great for Jon Boats & Kayaks. Anderson battery plug with terminals and four #8 FH mounting fasteners included. 12-24V. 50A.
Seadog 422210 Illuminated Horizontal 6 Switch Panel - 422210-1 - 354-4222101F1
Aluminum Horizontal Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
Seadog 4216451 Dual Volt/Amp Meter - Rocker Switch Style - 421645-1 - 354-4216451F1
This rocker switch style dual volt/amp meter monitors and displays the voltage and amps simultaneously. Fits into any 13/16" X 1-7/16" rocker switch hole. Digital red LED display. Input 6-30VDC. IP65 rating.
Seadog 421625 Round Digital 4 To 30 Voltage & 10 Amp Meter | Injected Molded Nylon - 421625-1 - 354-4216251F1
Injection molded nylon. Compact size allows for installation in a variety of locations the same round size as a standard 12V receptacle. For interior or fully protected locations only. DC shunt not required. Volts 4-30. Amps 10.
Seadog 421620-1 Oled Amp Meter - 421620-1 - 354-4216201F1
Designed to withstand constant vibration and the rigors of a wet marine or dusty outback environment. Displays data on a bright, waterproof, daylight readable OLED (Organic LED) screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Same compact round size as a standard 12V receptacle, this OLED meter provides many installation options. Injection molded nylon construction. IP66 rating. Amp Meter: Includes 100A/50mv shunt. 100 Amp range.
Seadog 421615 Round Digital 4 To 30 Voltage Meter | Injected Molded Nylon - 421615-1 - 354-4216151F1
Injection molded nylon. Compact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only. Volts 4-30.
Seadog 421610-1 Oled Temperature Meter - 421610-1 - 354-4216101F1
OLED (Organic LED) Temperature Meter is designed to withstand constant vibration and the rigors of a wet marine or dusty outback environment. Monitors temperature on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Same compact round size as a standard 12V receptacle, this OLED Temperature Meter provides many installation options. Injection molded nylon construction. Includes a prewired temperature sensor with a 6' cable. IP66 rating.
Seadog 4216001 Oled Voltmeter - 421600-1 - 354-4216001F1
The OLED (Organic LED) Voltmeter is designed to withstand constant vibration and the rigors of a marine environment. Monitors voltage on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Constructed of injection molded nylon with terminal spade contacts. Fits Sea-Dog® Power Socket Shell (4261001) and Mounting Bracket (4261051). IP66 rating.
Seadog 4208401 Cover For Breaker - 420840-1 - 354-4208401F1
Cover prevents contact with breaker studs to protect against damage and short circuits.
Seadog 4208391 Boot For Thermal Breaker, Pr. - 420839-1 - 354-4208391F1
Water resistant cover for thermal breakers.
Seadog 4208301 Thermal Breaker 30 Amp - 420830-1 - 354-4208301F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4208201 Thermal Circuit Breaker - 20 A - 420820-1 - 354-4208201F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4208151 Thermal Breaker 15 Amp - 420815-1 - 354-4208151F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4208101 Thermal Circuit Breaker - 10 A - 420810-1 - 354-4208101F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4208081 Thermal Breaker 8 Amp - 420808-1 - 354-4208081F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4208061 Thermal Breaker 6 Amp - 420806-1 - 354-4208061F1
Thermal AC/DC Circuit Breakers are constructed of molded Bakelite with stamped brass contacts. Used to protect an electrical circuit from damage caused by excess current. These push-to-reset circuit breakers are an economical alternative to magnetic breakers. Quick connect terminal style breakers are vibration and shock resistant. An alternative to fuses; they have the advantage of being resettable after tripping. Panel mounted compact design. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 4-35A @ 125-250VAC. 32VDC.
Seadog 4206531 Stainless Steel Power Socket - 426053-1 - 354-4260531F1
Power Socket with Plate is ideal for installing additional power outlets. Stainless steel socket with a stamped 304 stainless steel mounting plate. Maximum: 12VDC, 16A. Installs with two #8 RH fasteners (not included).
Seadog 420355 Long Shaft Three Screw Terminal Three Position Off Ignition Start Switch With Cap - 420355-1 - 354-4203551F1
Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys.
Seadog 420219 Double Pole Double Throw 7 Blade Terminal 12V 20 Amp Mom. On / Off / Mom. On Illuminating Contura® Rocker Switch - 420219-1 - 354-4202191F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Seadog 420214 Single Pole Single Throw 4 Blade Terminal 12V 20 Amp Mom. On / Off / Mom. On Illuminating Contura® Rocker Switch - 420214-1 - 354-4202141F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Seadog 420125 Single Pole Single Throw 5 Terminal Blade Light Tip 12V 15 Amp Mom. On / Off / On Toggle Switch - 420125-1 - 354-4201251F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog 420122 Single Pole Single Throw 4 Terminal Blade Light Tip 12V 15 Amp Mom. On / Off Toggle Switch - 420122-1 - 354-4201221F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Seadog 414900-3 Complete Windshield Washer 12V Kit | #10 Fastener - 414900-3 - 354-4149003F1
Comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles and mounting bracket with fasteners. Tank capacity is 2.5 liters/2.66 quarts. Fastener #10 RH.
Seadog 413120B1 Adjustable Wiper Arm, Stainless Steel W/Black Finish - 413120B-1 - 354-413120B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog 413054B-1 Premium Wiper Arm For Standard Motors, Black - 413054B-1 - 354-413054B1F1
Formed 304 stainless steel. Premium stainless steel wiper arm for use on standard motors (412321B-3, 412328B-3) and waterproof standard wiper motors (412321W-3, 412328W-3) with 3/8" shaft diameter.
Seadog 405969 Nickel Plated Brass Halogen 12V Flood Light Bulb | 5 Pieces Per Pack - 405969 - 354-405969F1
This is the replacement bulb for models 405610-3 and 405620-3. P43T base type.
Seadog 405950 (2) Stainless 12V 180 Lumens 32 Led Side Mount Docking Lights | #8 Fastener - 405950-1 - 354-4059501F1
Stamped 304 stainless steel. These surface mount LED docking lights have a sleek design and are super bright for excellent vision when docking. Use #8 RH fastener.
Seadog 4056831 Wireless Remote Control - 405683-1 - 354-4056831F1
Allows completely portable remote control of your spotlight.
Seadog 405510 Fiberglass Nylon & Stainless 55 Watt 4.58 Amp 12V Docking Light - 405510 - 354-405510F1
Docking Light is constructed with a fiberglass reinforced injection molded nylon housing for strength and UV resistance and a corrosion resistant stamped 304 stainless steel bracket. H3 style 12V 55W halogen bulb.
Seadog 4053353 Led Rectangular Flood Light, 9-36V - 405335-3 - 354-4053353F1
This marine grade LED Flood Light is constructed with a power coated aluminum housing with a stamped 304 stainless steel bracket. 6 super bright LEDs produce 1500 lumens. Low amp draw. 9-36V. IP67 waterproof rating.
Seadog 4051111 Halogen Flood Light Replacement Bulb, 1/Cd - 405111-1 - 354-4051111F1
Replacement Bulbs for 405110-1, 405115-1, 405120 & 405510, PK22S base type.
Seadog 403066-1 Motion Sensor Switch - 403066-1 - 354-4030661F1
Motion Sensor Switch can be used to activate LED and incandescent lights. The motion detection range is up to 15 feet, with an activation angle of 120°. Activation time is adjustable (10/20/50/70 seconds); factory preset 70 seconds. 2A max. 12-30VDC. IP67 waterproof rating.
Seadog 403060 Stainless 12/24V Multi Color Led Continuous Adjustment Memory Function Dimmer Switch W/On-Off Function - 403060-1 - 354-4030601F1
LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12/24VDC. IP67 waterproof rating.
Seadog 4018453 Led Mirror Light With Dimmer, Oval - 401845-3 - 354-4018453F1
This LED Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. Works with 12V and 24V systems. Includes three #6 FH fasteners and white hole plugs. CE, RoHS compliant. 3000K, 300 lumens.
Seadog 4018353 Led Mirror Light With Dimmer, 4" Round - 401835-3 - 354-4018353F1
This LED Mirror Light features white and blue LED lights with a built-in, touch controlled on/dim/off switch. Touch the center button to switch between white, blue, and off. Continue to touch button to activate dimmer. Works with 12V and 24V systems. Includes three #6 FH fasteners and white hole plugs. CE, RoHS compliant. 3000K, 300 lumens.
Seadog 4018173 Led Tear Drop Light With Dimmer - 401817-3 - 354-4018173F1
LED Tear Drop Light features a warm white light with blue accented, touch controlled on/dim/off switch. Touch the center button to turn on and off. Continue to touch button to activate dimmer. Warm white, 3000K, 9 Osram LEDs, 200 lumens @ 3W. Works with 12V and 24V systems. Includes two #6 RH fasteners. CE, RoHS compliant.
Seadog 401757 Plastic 5 Red & 15 White Led Day & Night 12V Dome Light | #8 Fastener | White Finish - 401757-1 - 354-4017571F1
LED Day/Night Dome Lights are constructed of corrosion resistant lightweight plastic. Prewired with integral on/off/on rocker switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with #8 RH fasteners (not included).
Seadog 401679 Stainless White & Red Led 12V Surface Mount Low Profile Day & Night Task Light With On / Off Switch | #6 Fastener - 401679-1 - 354-4016791F1
LED Low Profile Day/Night Task Light is constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Feature 12 LEDs; 8 warm white @ 0.19A (143 lumens) and 4 red @ 0.06A (43 lumens) for night vision. Integral 3-way switch activates by pressing the center of the lens. Switch goes from on-night/off/on-day. Installs with two #6 FH fasteners (not included). 12-28VDC. IP65 rating. CE approved.
Seadog 401676 Stainless 12 Led 12V Surface Mount Low Profile 100 Lumens Task Light With On / Off Switch - 401676-1 - 354-4016761F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 12 LEDs @ 0.4A (200 lumens), w/ switch: Activated by pressing the center of the lens. IP65 waterproof rating
Seadog 401666 Stainless 12 Led 12V Surface Mount Low Profile 100 Lumens Task Light With On / Off Switch - 401666-1 - 354-4016661F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 6 LEDs @ 0.2A (100 lumens) w/ switch: Activated by pressing the center of the lens. IP65 waterproof rating
Seadog 401665 Stainless 6 Led 12V Surface Mount Low Profile 100 Lumens Task Light - 401665-1 - 354-4016651F1
Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Installs with two #6 FH fasteners (not included). 12-28VDC. 6 LEDs @ 0.2A (100 lumens), w/o switch: IP67 rating.
Seadog 4016471 White Plastic Housing W/Blue Leds, 8 Lumens Courtesy Light - 401647-1 - 354-4016471F1
PlasticRated at 12 VDC#6 Fastener
Seadog 4016271 White Plastic Housing W/White Leds, 8 Lumens Courtesy Light - 401627-1 - 354-4016271F1
PlasticRated at 12 VDC#6 Fastener
Seadog 4016251 Chrome Plastic Housing W/White Leds, 8 Lumens Courtesy Light - 401625-1 - 354-4016251F1
PlasticRated at 12 VDC#6 Fastener
Seadog 401615 Chrome Plastic Housing W/Blue Leds, 8 Lumens Courtesy Light - 401615-1 - 354-4016151F1
Plastic Rated at 12 VDC#6 Fastener
Seadog 4014681 12V Led Strip Light, 6", Red - 401468-1 - 354-4014681F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014671 12V Led Strip Light, 6", Green - 401467-1 - 354-4014671F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014661 12V Led Strip Light, 6", Blue - 401466-1 - 354-4014661F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014651 12V Led Strip Light, 6", White - 401465-1 - 354-4014651F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014501 12V Led Strip Light, 4", White - 401450-1 - 354-4014501F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014481 12V Led Strip Light, 4", Red - 401448-1 - 354-4014481F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014471 12V Led Strip Light, 4", Green - 401447-1 - 354-4014471F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014461 12V Led Strip Light, 4", Blue - 401446-1 - 354-4014461F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 4014451 12V Led Strip Light, 4, White - 401445-1 - 354-4014451F1
Constructed of corrosion resistant lightweight plastic. These lights feature low amp draw LEDs. Installs with two #10 RH fasteners (included). Circuit boards are epoxy potted for a waterproof seal. 12/24VDC. IP67 waterproof rating.
Seadog 401422 Large Deluxe Led 9-28 Voltage Courtesy Light | Facing Forward | White Finish - 401422-1 - 354-4014221F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Seadog 401420 Large Deluxe Led 9-28 Voltage Courtesy Light | Facing Down | White Finish - 401420-1 - 354-4014201F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Seadog 401418-1 Led Square Courtesy Light, Blue - 401418-1 - 354-4014181F1
LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8" square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.
Seadog 401417-1 Led Square Courtesy Light, White - 401417-1 - 354-4014171F1
LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8" square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.
Seadog 4014131 Led Alcor Courtesy Light, Blue - 401413-1 - 354-4014131F1
LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2" diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. 12V.
Seadog 4014121 Led Alcor Courtesy Light, White - 401412-1 - 354-4014121F1
LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2" diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. 12V.
Seadog 401275 Led Flush Mount Oval Courtesy Light With Stainless Cover | White Finish - 401275-1 - 354-4012751F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Seadog 401270 Led Flush Mount Round Courtesy Light With Stainless Cover | White Finish - 401270-1 - 354-4012701F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Seadog 4007153 Led Cabin/Reading Light W/Touch Dimmer & Usb Port - 400715-3 - 354-4007153F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch and USB port. This light features an adjustable direct beam reading light, as well as ambient light for the cabin. Warm white LED light with blue accented dimmer switch, 3000K Bridgelux bulb provides 270 lumens @ 3W. USB Port: 5V/2A. Constructed of high quality brushed aluminum. Includes two #6 FH fasteners and Allen wrench. CE, RoHS compliant.
Seadog 400710-3 Led Cabin/Reading Light W/Touch Dimmer - 400710-3 - 354-4007103F1
LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K Cree bulb providing 270 lumens @ 2W. Works with 12V and 24V systems. Includes two #6 FH fasteners and Allen wrench.
Seadog 4002031 Led Dome Light, 6-3/4" Dia. - 400203-1 - 354-4002031F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 4002001 Stainless Steel Dome Light, 12V With On/Off Switch, 6-3/4" Dia. - 400200-1 - 354-4002001F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 4001931 Led Dome Light, 5-1/2" Dia. - 400193-1 - 354-4001931F1
LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).
Seadog 4001901 Stainless Steel Dome Light, 12V With On/Off Switch, 5-1/2" Dia. - 400190-1 - 354-4001901F1
These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Pre-wired with an integral on/off toggle switch. Includes an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.
Seadog 400180 Flush Mount Port & Starboard Side Lights, Stainless, 1 Pr. - 400180 - 354-400180F1
Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400165 Top Mount Red Port & Green Starboard Side Lights - 10 Point Light Arc - 400165 - 354-400165F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog 400130 Stern Light | 12 Point Light Arc | #4 Fastener | Stamped 304 Stainless - 400130-1 - 354-4001301F1
135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400079 Stainless Led Side Mount Side Navigation Port & Starboard Lights | Uscg 2 Nm Approved | #8 Fastener - 400079-1 - 354-4000791F1
LED Side Mount Side Lights are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400078 Black Led Side Mount Side Navigation Port & Starboard Lights | Uscg 1 Nm Approved | #8 Fastener - 400078-1 - 354-4000781F1
LED Side Mount Lights are approved for USCG 1 NM (Colreg 1 mile).Constructed of corrosion resistant stamped 304 stainless steel or injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400069 Stainless Led Top Mount Side Navigation Light - Uscg 2 Nm Approved - #8 Fastener - 400069-1 - 354-4000691F1
LED Top Mount Side Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). Includes port and starboard lights. Constructed of stamped 304 stainless steel with an investment cast 316 stainless steel base. Installs with four #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 400042 Led All Around Light | Uscg 2 Nm Approved | #12 Rh Fastener - 400042-1 - 354-4000421F1
Fixed mount and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw.
Seadog 400022 Led Masthead Light | Uscg 2 Nm Approved | #12 Fastener - 400022-1 - 354-4000221F1
LED 225° Masthead Lights are fixed mounted and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4000131 Led Fold Down All Around Light, 24" - 400013-1 - 354-4000131F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 4000121 Led Fold Down All Around Light, 9" - 400012-1 - 354-4000121F1
LED Fold Down 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog 371840 Flush Mount Ski Tow | 3/8" Thread Diameter | Investment Cast 316 Stainless - 371840 - 354-371840F1
Flush mount ski tow designed to give your transom an updated look. Stud centers will allow direct replacement of the most popular standard ski tow. Includes backing plate.
Seadog 3570341 Keyless Deck Fill-Waste - 357034-1 - 354-3570341F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" - 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570331 Deck Fill -Water - 357033-1 - 354-3570331F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 357033 Keyless Deck Fill-Water - 357033 - 354-357033F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570311 Deck Fill - Diesel - 357031-1 - 354-3570311F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570301 Gas Deckfill W/Keyless Cap - 357030-1 - 354-3570301F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570001 Black Nylon Fill Body W/O Cap - 357000-1 - 354-3570001F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3532301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 353230-1 - 354-3532301F1
This Flush Mount 90° Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose at a 90° angle. Constructed of corrosion resistant investment cast 316 stainless steel.
Seadog 3522301 90° Gas Tank Vent, Fits 5/8" Hose, Stainless - 352230-1 - 354-3522301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Investment cast 316 stainless steel construction. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 3520301 90° Gas Tank Vent, Fits 5/8" Hose, Brass - 352030-1 - 354-3520301F1
Compensates for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery. Also doubles as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose at a 90° angle.
Seadog 351391 Angled Hose Deck Fill Replacement Cap - 351391-1 - 354-3513911F1
Investment cast 316 stainless angled hose deck fill replacement cap. Cap threads are 1-1/2" to 12 NPSM straight.
Seadog 351331L Locking Diesel Hose Deck Fill W/Keys, 2" Hose - 351331L - 354-351331Lf1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351331 Diesel Deck Fill For 2" Hose - 351331 - 354-351331F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 351330 Gas Deck Fill A:2" Hose, B:3-1/4", C:3-7/16", #10 Fh, Gas - 351330 - 354-351330F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 2" hose versions are 1-1/2" - 11-1/2 NPSM straight cap threads.
Seadog 3513231 Waste Deck Fill For 1-1/2" Hose - 351323-1 - 354-3513231F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.
Seadog 351321L1 Locking Diesel Hose Deck Fill W/Keys, 1-1/2" Hose - 351321L-1 - 354-351321L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 351321 Diesel Deck Fill For 1-1/2" Hose - 351321-1 - 354-3513211F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351320L Locking Gas Hose Deck Fill W/Keys, 1-1/2" Hose - 351320L-1 - 354-351320L1F1
Locking Hose Deck Fills is constructed of corrosion resistant investment cast 316 stainless steel for long term durability. Locking feature prevents fuel theft. Cap spins freely when in the locked position. To unlock the cap, turn key until key hole is inline with the cap tabs (shown in photo). Color-coded with international symbols for easy deck fill identification. 1-1/2" © 11-1/2 NPSM straight cap threads. Includes two keys and cap attachment cable. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.
Seadog 3513201 Gas Deck Fill For 1-1/2" Hose - 351320-1 - 354-3513201F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" © 11-1/2 NPSM straight cap threads.
Seadog 351300 Hose Deck Fill Body Without Cap, 1-1/2" Hose Diameter - 351300-1 - 354-3513001F1
316 stainless steel body with black plastic cap. Cap threads are 1-1/4" to 11-1/2 NPSM straight. Use #10 fasteners.
Seadog 340041 Deck Drain 5-5/8" White Abs - 340041 - 354-340041F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400401 Deck Drain 5-5/8" Black Abs - 340040-1 - 354-3400401F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400211 Deck Drain 4-3/16" White Abs - 340021-1 - 354-3400211F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400201 Deck Drain 4-3/16" Black Abs - 340020-1 - 354-3400201F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 337425 Hose Thru Vent, 4" Black - 337425 - 354-337425F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337415 Hose Thru Vent, 4" White - 337415 - 354-337415F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337325 Hose Thru Vent, 3" Black - 337325 - 354-337325F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 337315 Hose Thru Vent, 3" White - 337315 - 354-337315F1
Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog 3361651 Smooth Finish Quarter-Turn Deck Plate, Black,A:6-1/2" , B:8-1/8", C:6-1/2", D:7-3/8" - 336165-1 - 354-3361651F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361571 Smooth Finish Quarter-Turn Deck Plate, Black,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336157-1 - 354-3361571F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314051 Oval Louvered Vent, Stainless Steel - 331405-1 - 354-3314051F1
Oval Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.94 sq in.
